I am going through all of your a-321 tutorials and using them as a make shift training program. Then I plan on jumping into your actual flight sims that you have. I really enjoy doing this and thank you for providing them.
@RayongRay
4 ай бұрын
Excellent as always wondered how to apply a hold and especially with the Toliss A320 Neo as I am very new to this amazing aircraft in XP12. Thanks also for all your helpful instructive videos.
@MrJsp181
4 жыл бұрын
I didn't found a good video about this, thanks for this great video (and the other one ^^) continue !
@320SimPilot
4 жыл бұрын
Thanks, will do!
@arielf82
4 жыл бұрын
Thanks for the great video! I have been on the lookout for a proper holding tutorial, and here it is. As you encourage to express other topics of interest, here are two: - Procedure for a Missed Approach - The proper way of doing a Take-off/Go-Around/Land. The distance/altitude/speed/headings from the airport at the various points in the procedure. This is excellent for practicing landings and approaches, but I fail in adapting the right settings at each stage. Definitely very different from the Cessna! Thanks for sharing your experience and knowledge with us.
@320SimPilot
4 жыл бұрын
Thank you for watching as always and I am glad it was useful! I will see what I can do for those topics. Thank you for the suggestions and feedback :)
@squidge73
3 жыл бұрын
I have been watching a few of your videos in this series and I find them all very informative I'm learning a lot thank you.
@320SimPilot
3 жыл бұрын
Great to hear!
@gbower1
4 жыл бұрын
Thanks for the excellent info. I set up a hold while I went out for a short time and got back before reaching the holding pattern and couldn't figure out how to cancel it but this video solved that really quick. So much information to learn.
@mrinck
2 жыл бұрын
Great video as always ! TY very much
@Brooks__EU
4 жыл бұрын
And again, thank you a lot for the Video again :) Will you maybe do a full fight video at one point with ATC Coverage on Vatsim or something? I think that would be cool. Also those ATC Guys at Vatsim probably would enjoy comms with a real pilot :) Brevity will be on point
@320SimPilot
4 жыл бұрын
Thank you for watching again! I have recently managed to get VATSIM working with audio so hopefully this will be a video I do soon :)
@Brooks__EU
4 жыл бұрын
@@320SimPilot Awesome. I'd love to fly along with you on a route once you feel comfortable to do so with VATSIM :)
@mfmf5168
4 жыл бұрын
Thanks ! very well explained !
@fabiozatz8769
3 жыл бұрын
Great video Captain.
@jackgregory9189
4 жыл бұрын
Hello, when you descend or climb is there a way to see where on the nav display you will reach the altitude set on the MCP? Great video :)
@320SimPilot
4 жыл бұрын
In real life yes, but for now it is not always available in the ToLiss Airbus it seems. When in NAV mode you can see it during the climb as seen here: kzitem.info/news/bejne/kYqGqYSPmJ17ooo Hopefully it is added soon, it is a small arrow next to the track line or NAV line on the navigation display. It also works using vertical speed in the real aeroplane. Thank you for watching!
@jackgregory9189
4 жыл бұрын
320 Sim Pilot Ahh thanks for replying, I’m watching that video now. Also I would highly recommend the BetterPushback add on, its a lot better than the default tug :).
@simaviation3
4 жыл бұрын
thanks a lot! Really helpful tutorial.
@320SimPilot
4 жыл бұрын
You are most welcome!
@enesaydn8504
4 жыл бұрын
Thank youu !
@320SimPilot
4 жыл бұрын
You are welcome!
@Chase1399Aviation
2 жыл бұрын
I'm new to holds. ATC gave me an instruction to hold R turns for 10 miles. I was unable to enter in the distance, only time. So adding time naturally added distance, but is there a way to just ent the distance instead of guessing with the time? Great video by the way, very helpful. Thanks
@chrianrickbriones452fms7
4 жыл бұрын
Can I ask? Is it okay if you choose to go direct to Nugra instead of choosing the exit hold immediately option when exiting a hold?
@320SimPilot
4 жыл бұрын
If ATC allows you to go directly to another WPT then yes this should work in the ToLiss!
@tommyaldred4302
3 жыл бұрын
Hi there Great tutorial. Just struggling to find a video on how to change from right turn holding to left turn. As i have been unsuccessful so far
@tomstravels520
4 жыл бұрын
Can you change the hold speed on the MCDU or can it only be done by selected speed?
@320SimPilot
4 жыл бұрын
I would select speed personally. I have tried in the ToLiss and it allows you to put a speed constraint in at the hold but it ignores it and goes to green dot speed once you enter the hold. Thanks for watching!
@JonAnderMB
3 жыл бұрын
Hi! Late to the party but relevant (I think) Given the fact that for the time being we don't have an automatic way of performing holds on MSFS2020's A320 like you do on the toliss, would you mind doing a video about how to perform holds "manually" on that model? - thanks!
@ottoversetv
3 жыл бұрын
I've flown with the A32NX mod and still can't fly holds are you able to?
@JonAnderMB
3 жыл бұрын
@@ottoversetv not implemented as of yet. You can do it manually but I'd rather do it as they do in real aviation
@ITflyguy
4 жыл бұрын
Great help my friend
@320SimPilot
4 жыл бұрын
Happy to help! Thanks for watching!
@budguy21
3 жыл бұрын
Any difference in A32NX?
@isakls4551
3 жыл бұрын
Thanks for the tutorial! Do you know if this works in the flight factor a320?
@DJclonk
3 жыл бұрын
it should
@isakls4551
3 жыл бұрын
@@DJclonk ok, thanks!
@ottoversetv
3 жыл бұрын
@@isakls4551 i don’t know if it’s bc i have the A32NX mod but holds don’t work for me.
@isakls4551
3 жыл бұрын
@@ottoversetv ok, thank you!
@actordc
3 жыл бұрын
Does the A320 also fly required holding pattern entries automatically?
@Soltie77
4 жыл бұрын
Thanks for well made contents for beginner. Could you please share flight plan file for toliss A321?
@320SimPilot
4 жыл бұрын
Hi, thanks for watching and glad you are enjoying the videos. What flight plan file do you mean, the routes I fly in the FMGC?
@Soltie77
4 жыл бұрын
320 Sim Pilot Yes I want to follow all with your video clips
@rangerrick8220
3 жыл бұрын
What is the limiting speed for the speed brakes?
@Haxenhans
3 жыл бұрын
No speed limit for speed brakes
@PyxisGuru
4 жыл бұрын
Going to check to see if this works yet is msfs2020!
Пікірлер: 47