I run three computers and I'm unable to get this running on any of them. Two computers load and just sit at calculating, the third computer gives me an error. The computer that gives me an error, the ports are not in use, I tried a new download and I have no firewall/virus protection.
@DrishalMAC2
6 ай бұрын
Yes the unzipping taking a really long time is currently being investigated by myself and the dev and I will keep everyone updated. Regarding the other error, could you join my discord and post the issue there in #X-Plane help along with the screenshot of the error :) Thanks
@RedEye737
6 ай бұрын
Gonna try this after my flight. Thank you man 🤙
@DrishalMAC2
6 ай бұрын
No worries my friend! Let me know what you think!
@megacode2
6 ай бұрын
Does this work with XP11? Also, can you run auto ortho as well or does this replace it? Thanks for another fine video!
@DrishalMAC2
6 ай бұрын
Yes this should work with XP11 too. This replaces AutoOrtho so if you install this you would need to delete AutoOrtho to avoid any conflicts. Thank you for the kind words! :)
@leiflavebrink9639
6 ай бұрын
Another great video as always mate !! These videos show your deep knowledge and when you are at your very best. As you know I started generating Ortho4XP tiles on an external SSD-drive and have had no problems at all with them, opposite to AutoOrtho. I currently have about 160 tiles generated. Can you see any advantages with Map Enhancement compared to Ortho4XP other than not having to spend time on manually generating all the tiles? Once again Thanks for an outstanding work !!
@DrishalMAC2
6 ай бұрын
Thank you very much Leif! Map Enhancement pretty much achieves the sames as AutoOrtho but the developers goal is to make it much more stable and easier to install. At the moment it does seem more stable but at times the quality can be quite low. This is very much cpu and Internet dependent. The only real reason to switch from Ortho4Xp is due to not having to pre generate tiles. However my first choice for ortho scenery is still ortho4xp as its the highest quality. Map Enhancement is still in public beta and in my opinion still needs some work but the dev is very focused on it and many updates are coming out. It's a project to watch for sure!
@leiflavebrink9639
6 ай бұрын
@@DrishalMAC2 Thanks again for your as always rapid response. It feels good that you confirmed what I guessed 😀
@DrishalMAC2
6 ай бұрын
Thank you very much Leif! And a BIG thank you for all the coffee's :)
@Bearviation
6 ай бұрын
Hi there! I added you on Discord but wanted to ask here so others may see it: how to integrate this with XOrganizer? From what I gather after we start the app (without having it automatically start XP) so the scenery files are automatically added to the scenery folder. Is it at that point one would open XO and then ensure things are in the proper order before starting XP from XO?
@DrishalMAC2
6 ай бұрын
The program should automatically sort the .ini out however its worth checking in XO too after starting the program. I don't think you will have to do anything other than check it's correct. Unfortunately I don't have XO so can't test this myself but do let me know how it goes :)
@Bearviation
6 ай бұрын
@@DrishalMAC2Sounds like I can be the guinea pig in this experiment? Ha! I'll report back to you on Discord after I have it set up and tested if you'd like.
@DrishalMAC2
6 ай бұрын
That would be amazing thanks. The more information I can get the better as I can then help more people haha. :)
@Bearviation
6 ай бұрын
@@DrishalMAC2 One last Q: Do you recommend completely removing AO and the current WinFSP install before moving forward with this?
@DrishalMAC2
6 ай бұрын
I would recommend removing everything to do with AutoOrtho but winFSP should be fine to leave.
@FlightLineYT
29 күн бұрын
I’m interested however does this remove autogen from the sim?
@DrishalMAC2
29 күн бұрын
Hello, this shouldn't remove any autogen from the sim. It will simply add satellite imagery as your ground textures. :)
@FlightLineYT
29 күн бұрын
@@DrishalMAC2 Great. I'll give it a shot. Thanks for the quick response.
@DrishalMAC2
29 күн бұрын
@FlightLineYT no worries :)
@gena2369
5 ай бұрын
The server start failed. Reason: No yAutoOrtho_Overlays or at least 1 z_ao scenario found in Custom Scenery folder. Please check the folder and try again. For more information, please visit the FAQ page. why?
@DrishalMAC2
5 ай бұрын
Have you installed all the base packages correctly?
@gena2369
5 ай бұрын
I've sorted it out, now there's a new problem: The server start failed. Reason: Unable to create disk cache database, please check the cache folder and delete everything in it. If the file is in use, please exit this app and try again.@@DrishalMAC2
@DrishalMAC2
5 ай бұрын
Did you try deleting your current cache folder and making a new one? Do you have enough disk space left?
@gena2369
5 ай бұрын
@@DrishalMAC2 I figured it out too and here it is again: The server start failed. Reason: Host map failed to start within the expected time. Please check winfsp installation. Last exception: Could not find file 'C:\Users\Gena\Documents\map x plane 12\Base package\yAutoOrtho_Overlays'.
@DrishalMAC2
5 ай бұрын
No It looks like you need to reinstall or upgrade winFSP and make sure you have the overlays base package correctly installed
@mariocardabollo3631
5 ай бұрын
where can i download the base package? there is no texture pack in your link.
@DrishalMAC2
5 ай бұрын
Hello, Please look at the updated video install as this has a slightly different install process and the updated links :) kzitem.info/news/bejne/pYiVtY2ocHt0nGksi=heY4WETxRK-r6apD
@officialdjgooze
6 ай бұрын
does the xp map packages take up around the same space on your computer as autoortho? or is it less?
@DrishalMAC2
6 ай бұрын
It's less than AutoOrtho, around 80gb
@officialdjgooze
6 ай бұрын
@@DrishalMAC2 Thanks!
@delsinsaviation
6 ай бұрын
Does this affect performance? Will it use a minor usage of vram? How much fps is expected on vatsim? Auto ortho seems to drain my fps when on the network.
@DrishalMAC2
6 ай бұрын
It really depends on your Internet speeds and pc. It shouldn't affect fps much but may cause stutters. I believe it will also use some VRAM. Best bet is to try it out :)
@delsinsaviation
6 ай бұрын
@@DrishalMAC2 well I’m downloading all of the files right now. Guess I’ll have to wait and see
@DrishalMAC2
6 ай бұрын
Let me know how it goes :)
@delsinsaviation
6 ай бұрын
@@DrishalMAC2 well starting the server led me to an error “The server start failed. Reason: z_ao* folder not found in Custom Scenery folder.” Weird how I have downloaded the files right
@DrishalMAC2
6 ай бұрын
Could you join my discord and post the issue in #X-Plane help? It would make it much easier to help you as I want to ask for screenshots of the file structure and .ini file
@pengibuildss
6 ай бұрын
does it take up much storage?
@DrishalMAC2
6 ай бұрын
About 80GB, but you can place the base packages werever you want :)
@pengibuildss
6 ай бұрын
@@DrishalMAC2 dammnn i only have 50 gb free 😅
@DrishalMAC2
6 ай бұрын
Well it's 80gb for all the base packages. You might he able to have na or eur but you need space for the cache too
@giorgioramones5272
6 ай бұрын
The z_ao_sa.exe when I try to extract it says that I can’t open the file as 7z is not archive
@DrishalMAC2
6 ай бұрын
Hmmm strange, could you join my discord where I can assist further as I would require some screenshots from you?
@giorgioramones5272
6 ай бұрын
@@DrishalMAC2 yes sure, I’m there already
@DrishalMAC2
6 ай бұрын
Ok great!
@Pe11ePD
6 ай бұрын
I downloaded the EU scenery in 3 minutes. USA in 6. Why 1 hour?
@DrishalMAC2
6 ай бұрын
What's 1 hour?
@Pe11ePD
6 ай бұрын
@@DrishalMAC2 you needed 1 hour to download the scenery. Maybe github server was overloaded, never mind...
@cheeky_cheesy4924
6 ай бұрын
is this better then auto ortho?
@DrishalMAC2
6 ай бұрын
I'm still fully testing it but so far yes, it's much less temperamental for sure and the application is itself is miles better!
@FlyGuy2000
6 ай бұрын
@@DrishalMAC2Is it that the scenery is better or it's just easier to use?
@DrishalMAC2
6 ай бұрын
In some cases it's higher quality and also its much easier to install
@lol-j7u
3 ай бұрын
the same Chinese guy that made the map enhancement for msfs.
@DrishalMAC2
3 ай бұрын
Yes the developer is the same person
@danhohman
6 ай бұрын
This sounds pretty intriguing but I run Xplane on a Mac. I suspect I’m out of luck.
@DrishalMAC2
6 ай бұрын
Ah yes unfortunately I believe this can only be run on Windows. However I have seen people install AutoOrtho on Mac
@CharlieMartorelli
6 ай бұрын
Will there be a Mac version ?
@DrishalMAC2
6 ай бұрын
Not that I'm aware of unfortunately
@paperaviationphilippines320
6 ай бұрын
Is its download speed faster than autoortho?
@DrishalMAC2
6 ай бұрын
The download speeds depend on your Internet do should be the same as AutoOrtho. This program though us much less temperamental and easier to install
@Nubinator
6 ай бұрын
@@DrishalMAC2 I have a fast internet speed and get up to 50 MB/s (not mbps) but autoortho only seemed to use up to 3 MB/s if im lucky and had lots of freezing mid game, downloading the files right now, will see how this one does, really hope its better though. Thanks for the video!
@DrishalMAC2
6 ай бұрын
Good luck! Let me know what you think! Check out my pinned comment as the install has changed slightly. Updated video coming soon
@Nubinator
6 ай бұрын
@@DrishalMAC2 It still downloads at about 5 MB/s but surprisingly its loads faster, might be placebo, but i haven't had any problems of the game freezing mid flight yet like with autoortho which makes the experience better by like 10 folds
@DrishalMAC2
6 ай бұрын
Ah I'm very glad to hear that! Hopefully the good experience continues!
@airmanparker
6 ай бұрын
I didn't know flight simulators fly on maps. I think you mean scenery.
@DrishalMAC2
6 ай бұрын
Yes normally I would use the term scenery however the actual name of the program is called "X-Plane Map Enhancement", I was just using the official name of the program :)
@Thom3302
6 ай бұрын
This is the same as the msfs map enhancement to get google map data
@DrishalMAC2
6 ай бұрын
Very similar yes. It's made by the same developer :)
@shaanfliesplanes
6 ай бұрын
Honestly I’m not trusting this yet
@DrishalMAC2
6 ай бұрын
Why not?
@shaanfliesplanes
6 ай бұрын
@@DrishalMAC2 it seems unstable
@shaanfliesplanes
6 ай бұрын
@@DrishalMAC2 I also feel like it might crash or something and I also don’t want to keep an external app open while I sim
@DrishalMAC2
6 ай бұрын
Maybe ortho4xp is more your style then :)
@shaanfliesplanes
6 ай бұрын
@@DrishalMAC2 yeah I know but even that is just eh
@sonwolf777
5 ай бұрын
Yea not a good tutorial the program don’t load at all
@DrishalMAC2
5 ай бұрын
Hi there, many people have used this tutorial and have had it working perfectly fine. Most issues are another cause and not to do with my tutorial :) I'm more than happy to help with the issue in my discord server if you could provide more details but please do not discredit my video.
@eeriknieminen6627
6 ай бұрын
awful mod, doesnt work at all
@DrishalMAC2
6 ай бұрын
Whats the issue? Maybe I can help. Please remember it's still in open beta
@eeriknieminen6627
6 ай бұрын
@@DrishalMAC2 yea sorry about the angry comment, i was messing with it for 4hours and i got mad. So when i load in xplane it gives me an error that it is not able to load a terrain file.
@DrishalMAC2
6 ай бұрын
If you join my discord and send a screenshot of the error in #xplane-help i will be more than happy to help :)
@orciva1
6 ай бұрын
dont work for me...too bad ctd and ctd...nothing
@DrishalMAC2
6 ай бұрын
When does it ctd? What's the exact issue?
@orciva1
6 ай бұрын
@@DrishalMAC2 Thank you, appreciated DrishalMAC2, for your prompt help, I have followed your video tutorial, everything was fine until after opening the x-plane 12 simulator, after loading a flight it appears before starting said flight, that it cannot load the textures because it cannot files of type ter are found and enunciated.
@orciva1
6 ай бұрын
but I also noticed that in the textures folder black and white images appear without any definition, that I also noticed with autoortho
@DrishalMAC2
6 ай бұрын
Did you update to 0.9.4 and download through new base scenery packs? Check my pinned comment :) Also feel free to join my discord and post in #X-Plane help and I can addict further there
@orciva1
6 ай бұрын
@@DrishalMAC2 Dear friend, that is exactly what I am doing, I downloaded the latest version, but tell me one thing, what do I do now with those files that I downloaded, I am interested in the South American area for now that I have downloaded all the ortho overlay 7 z 002,003,004, year files. sha256, sa.7z 002,003,004 and z..sa, and two zip files. and autoOrtho and z_ao_sa.7z
@_PEEN1E
6 ай бұрын
Oh man I just had the missus download all my autoortho packs on my new build while I was at work today and now I see this 😅 she isn’t gonna be happy 🤣🤣 Thanks for the vids capt 🫡
@DrishalMAC2
6 ай бұрын
Haha no worries my friend! I think you may be able to use the ones you already downloaded if you copy them out of the z_autoortho folder into a separate map enhancement folder. But I would probably recommend spending a bit more time and delete everything to do with AO and install this from scratch just to limit any possible issues :)
Пікірлер: 93