Cool. Didnt know about bridge mode on airport express
@samschmid818
2 жыл бұрын
This is very cool, very smart way to do this! Thanks for the idea!
@getlostinsound
2 жыл бұрын
Happy it helped!
@pandiwan6376
2 жыл бұрын
Hi, thanks for the wireless bridge tip, I will try this. I personally use OSi Midi with xtouch to control my MR18 wirelessly (via usb). It works great as well and permits to personalise each button of the control surface.
@getlostinsound
2 жыл бұрын
Good tip, thanks!
@djdiegogarino3494
2 жыл бұрын
@@getlostinsound Hello, how are you, do you know if you can connect a behringer x32 with a xair 18 and use it as a stage snake?
@getlostinsound
2 жыл бұрын
@@djdiegogarino3494 unfortunately not
@Kamertonas
Жыл бұрын
Thanks so much for the review. I recently purchased a Behringer X-Touch to work in conjunction with an XR 18 mixer for a live performance. I couldn't figure out how to get the signal specifically from the X-Touch (not from the XR18) via USB or Ethernet or some other way to send that signal to Live Strimming (radio broadcast). Those videos that were supposed to answer this question did not. I would be very grateful for any help.
@getlostinsound
Жыл бұрын
@Kamertonas Maranatha, the X-Touch isn’t designed to input or output an audio signal. It is only a remote control for the mixer or DAW. To get audio from the XR18 to your live stream, you’ll need to connect your computer directly to the XR18 via USB. If you don’t have the option of the computer being close to the mixer, you can run analog audio cable(s) from your XR18 into an audio interface connected to the computer.
@Kamertonas
Жыл бұрын
@@getlostinsound thank you so much for the answer. I have a second question: how to control the sound in headphones near X Touch? is it really only with the help of P16-m? A rather expensive method to listen to solo tracks??
@getlostinsound
Жыл бұрын
@@Kamertonas A headphone extension from the XR18 is the cheapest route. I use a TRS/XLR adapter from the headphone jack, and then use XLR cable(s) to get the length I need, then a passive Behringer PM1 on my belt clip. I crank the headphone knob on the XR18 all the way up and use the PM1 to control the headphone volume. You could also use some type of wireless headphones/IEM. P16 would work, too.
@Kamertonas
Жыл бұрын
@@getlostinsound It's nice to communicate with the person who answers! Thanks. And what if I connect my computer to xr18 using USB Extension Ethernet RJ45 LAN Cat5. Will there be a signal delay? Or another for example USB extension cable Hub -CETH-4USB NIB
@andrewhenderson8782
Жыл бұрын
Sorry, I don’t have any experience with those!
@drumsmichael
2 жыл бұрын
Question: When in Fader Flip / Bus send mode the channel names dissapear and it only shows the Tap point (e.g. "PostEQ") and the channel number... any option to change this so that in fader flip mode the channel name can be seen?
@NightFeverVar
11 ай бұрын
Hi how to remove the scan when starting the x-touch on with midas m32c please Hi comment enlever le scan au démarrage de la x-touch sur avec midas m32c stp
@juliodiazgranados2131
2 ай бұрын
Hi, Thanks for sharing your equipements and ideas. One question how do you hold stuck the Airport to the M32? Do you use velcro double face, which one? Thanks Julio
@getlostinsound
2 ай бұрын
I honestly don't remember. I have changed that rig up and am now using a different wireless access point. If your rack shelf has holes in it, you can zip tie it through the holes. Otherwise I would recommend heavy-duty double-sided tape or dual lock (the 3M heavy-duty version of velcro). You can use it on a shelf or just stick it to the piece of rack gear that's underneath it.
@wilsonbatuyong1147
2 жыл бұрын
Amazing video. just wanted to know how can you connect a separate laptop for zoom or teams via dante network and being controlled by the xtouch?? thanks in advance
@getlostinsound
2 жыл бұрын
@Colin Lozouet, sorry - I accidentally deleted your comment when I was trying to reply! Colin said: Hi, I wonder if it's possible to control the XR 18 wirelessly by linking X-TOUCH to your computer via USB, assuming that the computer is linked to XR 18 via a router. In other words, is it possible to control XR 18 software with X-TOUCH via USB ?
@getlostinsound
2 жыл бұрын
Not to my knowledge, at least not with X-Air-Edit. I know that some folks have had success using third-party apps like OSi MIDI and Mixing Station.
@djcanopr2060
Жыл бұрын
Greetings. where did you buy the magnet that you put on the x touch that says x32. They're like shortcuts or something.
@getlostinsound
Жыл бұрын
@DJ Cano PR I used store.birchwoodstudioandevents.com/Behringer_xtouch
@Adamant9
2 ай бұрын
Can the X touch record the sound from an XR18 to a USB plugged into the X Touch? So i want to I plug a mic into a XR18 and then record to a usb plugged into the X Touch.
@getlostinsound
2 ай бұрын
The X-Touch does not transmit audio signals. It's just a control surface.
@SLong2038
2 жыл бұрын
Hello.How are you? Is there a way to connect the X-Touch to DL32R by Mackie which I have? Thanks
@godspromiseonyenwani2405
Жыл бұрын
Hi. I wanted to know if the xtouch can be connected to s16 stage box
@getlostinsound
Жыл бұрын
I'm not sure. I believe the S16 can be controlled via MIDI, and I believe the X-Touch has a "custom" mode that allows you to program the buttons with different MIDI commands. You'd probably need to read the manuals for both products and try it.
@TheDude1764
Жыл бұрын
Hey. I know this video is a little old, but I was curious how you got such a stable connection with the Apple Airports. I have had a devil of a time using them with X32/M32 products and was finally told by tech support that they ‘don’t play nice’ with the product line. Any tips?
@getlostinsound
Жыл бұрын
Hey. That's a pretty broad question, and I'm not exactly sure what issues you had, but I basically set up the AirPort Extreme to create the network, and I set the AirPort Express to search for and join that specific network. This also allows you to connect a wired Ethernet device to the AirPort, which can communicate with any other wired or wireless devices on the network. Sidenote: I ended up ditching the Apple units and moved on to using a couple of other routers/access points. It wasn't because of them "not playing nice" with the X-Touch and mixer, but because the D-Links have external antennas, which gives me better overall range.
@TheDude1764
Жыл бұрын
@@getlostinsound Which D-Links did you end up using? Are they as convenient to manage through an app like the Airports were?
@getlostinsound
Жыл бұрын
@@TheDude1764 I bought two secondhand DIR-880L units (now discontinued) for about $25/ea. I imagine whatever their current models are would be fine, too. I have not used the MyDLink app, but it was pretty easy to configure using a web browser. I set up some different configuration files that can be recalled pretty easily, so that each unit could be its own standalone wireless access point (for separate sound systems at separate locations), or so that one can act as a wireless bridge for the other.
@ricksavasten1
2 жыл бұрын
Hello, I have a question. I'm running an x32 rack, I have a wireless router, using a laptop (wireless) and the X32 edit app to mix FOH. I'd like to be able to control the faders with the x-touch since the mouse scroll wheel is not smooth, and i can only move one fader at a time. Is it possible to just plug the x-touch into my laptop via USB and control my x32 edit app giving me control of channel faders/mutes/mixbus faders/DCA channels faders/master/EFX mutes. I'm fine with quick EQ changes and other navigation via the mouse, just thinking faders left hand, mouse right hand. Thanks, Rick.
@getlostinsound
2 жыл бұрын
Hi Rick. No, not to my knowledge. The much older versions of X-32 Edit did support Mackie Control via a controller like the X-Touch, but I don’t believe it’s possible now. I know that some folks use Mixing Station, a 3rd party computer/tablet app, and connect the X-Touch directly to it via USB. I haven’t done this though. I always connect to the X/M32 via network, either hardwired (preferred) or with a wireless bridge, like in this video.
@bramurph
2 жыл бұрын
Hello. Thanks for this video, but how do I setup my M32C to be controlled by the X-touch? I've got them both connected over ethernet, but the X-touch doesn't see the M32C.
@drumsmichael
2 жыл бұрын
in settings (best to connect with notebook or ipad etc. and go to settings -> remote -> there check X-Touch over Ethernet, might need fw update for this)
@bruceville_phd5523
2 жыл бұрын
1.) I get the idea but a little bit confused. How does the apple airport in xtouch connect to the router automatically without any settings/configurations in xtouch? 2) will it still do the same if I use 2 diff. brands of routers?
@andrewhenderson8782
2 жыл бұрын
Hi - (1) I had already configured the X-Touch to connect to the mixer over the network before using the wireless bridge. This video was mainly made to show that the X-Touch can be connected wirelessly via a wireless bridge. (2) As long as you have a bridge/router/extender that can connect to an existing Wi-Fi network, it should be fine. The Airport Express I was using as a wireless bridge can also be configured to connect to a different (non-Apple) network. You'll want to verify the options of your unit in its user manual.
@bruceville_phd5523
2 жыл бұрын
@@andrewhenderson8782 thanks for the reply! I get the idea but I know if I can pull it off. 😂 But nevertheless, your video is great & very informative! Thank you!
@lloydsnyder7277
2 жыл бұрын
Hope that helps? Bro you didn’t show anything. You just turned your gear on.
@getlostinsound
2 жыл бұрын
Yep. As the description states, "I don’t get into details with the network settings, since every router or access point is different. Just wanted to show that it can be done"
@robertlyle3806
Жыл бұрын
Its not wireless if an ethernet cable is connecting xtouch to other stuff. The laptop can be wireless because it can do wifi send and receive. The xtouch needs a wire.
@juliodiazgranados2131
2 ай бұрын
Bro. It's cause if you install the rack on stage. Due to the second small router you'll join the network from the Airport Express. The blue rj45 it's to Hook UP the x touch in that network. Using this setup you Can save a lot of money for small and medium size gigs. An iPad for monitors, computer and X touch for FOH and you are done.😊
Пікірлер: 42