All of a sudden, there is no availability on the market for Coolrunner Rev C (Aliexpress, Ebay, local market etc), so you may need to adjust your installation to Matrix chipmod. Rev 1 for Fat consoles would be preferable because there is no oscilator on it. Rev 3 is coming with Oscilator which would be needed for Slim models not for Fat. The signals on Xbox 360 board we need are the same but there is different literation on the Matrix chip than this of Coolrunner. So here are some info about where the signals should be connected on Matrix chip: RESET (RST) is "A" point, POST is "B", CLOCK (CLK) is "C" and PLL is "F". GROUND (GND) and 3,3v are obvious and same voltage here so it is the same installation like Coolrunner. Make sure that you will make the choice for Fat models grounding the points needed, here is a link on Weekend Modder website which covers all the above www.google.com/imgres?q=matrix%20xbox%20360%20points&imgurl=https%3A%2F%2Fweekendmodder.com%2Fimages%2Frgh12%2Fmatrixrgh12.png&imgrefurl=https%3A%2F%2Fweekendmodder.com%2FRGH-falconjasper.html&docid=XWBWbSY2o_CPyM&tbnid=Q3oTbZNGzbAP4M&vet=12ahUKEwj107PYzbqIAxUHSPEDHbNVD2oQM3oFCIMBEAA..i&w=526&h=333&hcb=2&ved=2ahUKEwj107PYzbqIAxUHSPEDHbNVD2oQM3oFCIMBEAA, program the chip and this is all you want to make the adjustments. All the rest are the same as it is for coolrunner installation! Good luck!🙂
@yvzlol
3 ай бұрын
rgh 3 for falcon has been good on mine my jaspers needed to be 1.2
@СергейНечаев-ы4к
3 ай бұрын
I am sorry, but why RGH 1.2, since there is a chipless RGH 3.0?
@elmlele
2 ай бұрын
rgh 3.0 is somewhat unstable on alot of consoles, i think its only best on trinity/corona but im not 100% sure
@СергейНечаев-ы4к
2 ай бұрын
@@elmlele why? It's pretty stable, same as rgh 2.0
@elmlele
2 ай бұрын
@@СергейНечаев-ы4к ive heard very differing things regarding 3.0 on phat consoles. apparently it doesnt play very nice with them, they might work initally but over time stop working as well. personally ill stick to 1.2 with phats.
Пікірлер: 7