Just installed two of these on two of my controllers, love it! Was using a strike pack that forced me to use a wired connection so this is the perfect upgrade
@jehanperez218
Жыл бұрын
Is it hard to solder i have no solder experience just got mine in the mail
@StudiosUntold
Жыл бұрын
@@jehanperez218 It wasn’t extremely difficult, I recommend you use a similar soldering tip as the one shown in the video and just be careful. The soldering iron is really hot and a lot of the points are close to vital components, so you have to be able to hold the iron steady and watch out for any plastic you might come in contact with
@StudiosUntold
Жыл бұрын
@@jehanperez218 Also, really make sure you’re being thorough as you put everything back together at the end. If you miss a screw or the headphone jack after you stick the connector side you’re gonna hate yourself. And be careful not to bend your battery prongs!
@thagirion218
Жыл бұрын
Another awesome kit definitely I'm buying!
@ExtremeRate
Жыл бұрын
Awesome! Thank you!
@a_s10_blazer
8 ай бұрын
Be warned. If you want to do this kit be sure to buy a tiny component saudering iron because i accidentally burned a couple spots on the thin plastic around some of the spots to sauder and also ripped some of the posts off the daughter board. Its all my fault but id definitely make sure your careful with it and make sure you dont burn through. Bought a small saudering iron and another daughter board to try and make it work again.
@tonka8080
Жыл бұрын
Biggest Downside is they are using the same super cheap plastic switches like in the older clicky trigger kits that used to crack and fall apart on people. they could have at least used some metal switches like some mini metal 3x6 smd switches or even some met ak 3x4 switches.The3x4m ones are almost identical to the plastic ones used. i alw remove the plastic one for the metal myself. i got tired of customers breaking them.
@ExtremeRate
Жыл бұрын
Thanks for your suggestion. We have to balance the duration and the clicking feedback of the buttons, the cost of the switches is not a thing always
@leethornton85
10 ай бұрын
Great kit i just find the the back buttons have play in them and wobble about too much
@leethornton85
10 ай бұрын
@extremerate i have nothing but problems today with my buttons when i press i dont feel it click on press my k2 and k4 buttons . i got the kit from amazon 2 days ago and i dont want to have to desolder the whole thing to return back what are my options ?
@EspositoChristian
5 күн бұрын
I have completely assembled the kit and verified that all the soldering is correct. However, the K1 button is not working. What could be causing this problem?
@TheGamer2Know
Жыл бұрын
Loving the production of these!
@ExtremeRate
Жыл бұрын
Thank you bro!
@ayudrs
10 ай бұрын
I only had four of the testing lights turn on. I tried multiple times to resolder it for a connection but I cannot get the light to turn on. Did I break it?
@ayudrs
10 ай бұрын
9:34 nvm I realized it was because I didn't connect the two motherboards together properly. That was my issue.
@rickygonzales7991
8 ай бұрын
I’ll love to try to do this instead of buying another $150-$200 controller just get back buttons/paddles. I do miss my Elite Controller. But my main question is “Can I get banned for using a modded Microsoft Xbox controller?”.
@noahscool9
8 ай бұрын
No, I think the only reason you could be banned is by being reported for using those back paddle things from Amazon that plug in to the battery slot and have a turbo mode, which you could be reported in that game but not a full Microsoft ban
@pinetree7296
4 күн бұрын
I am really tempted to get one of these kits for a weekend hobby project i already have an Elite V2 , but this looks really neat. Can you remap back buttons to act like a ''Shift'' key? like the Elite V2 Using shift Key has been a game changer for me i wont use a controller without it.
@SoundwaveZabuza
Жыл бұрын
Will this layout (buttons on handles) be coming out on the PS5 controllers. I have modded 4 controllers using your kits as a hobby for myself usually getting the Rise 4 kit but found K3 and K4 not that useful to me based on it's location. I would love to have a layout like this on the PS5 controller.
@ExtremeRate
Жыл бұрын
We are working on a new layout for the dualsense controller, please stay tuned bro!
@KC_95
Жыл бұрын
@@ExtremeRatethanks ,bro!! can we still assume this year?
@dannydavito201
10 ай бұрын
Same as these buttons top 2 are un reachable really
@philipblack8694
4 ай бұрын
Do you have to cycle through all the profiles or is it just the ones you have assigned inputs to the back button? I want to be able to swap between a driving setup and on foot setup whilst playing a game
@derrickdhanessar3324
7 ай бұрын
To anyone that can help I got this kit yesterday and soldered all the points on then I used the tester board it showed 5 points weren't soldered so I did all 5 points that weren't soldered then I put the tester board on again and it showed on 4 light came on so I re soldered everything but only 4 light are coming on
@captaincrunch1707
Жыл бұрын
Was waiting on this. That’s a nice kit you guys have made but that’s more soldering than I’m interested in doing.
@ExtremeRate
Жыл бұрын
We are trying to work out a non-soldering solution, but only the dpad and abxy mappable
@demodaspacks2650
Жыл бұрын
@@ExtremeRateThat’s amazing too here I’ll look forward too it
@rcarb024
Жыл бұрын
@@ExtremeRatethat’s good enough for me. Does this victor kit require soldering for those face buttons?
@alasdairco
8 ай бұрын
@@ExtremeRatewhen will that come out give me a estimate?
@rtaskidoo14
4 ай бұрын
@ExtremeRate that would be awesome, i love the layout on the HOPE remap kit i hope you dont quit making those. But this kit does look nice
@steadywolf2000
10 ай бұрын
if i got this, the trigger stop click kit, and the ABXY clicky kit which do i install first? i also got clear shell parts
@steadywolf2000
10 ай бұрын
got them all installed and its working great!
@notekene
10 ай бұрын
what order did you do them in?
@Fortniteboii16
11 ай бұрын
Do you have to use the doddering iron or can you skip it I don’t ah e one and my controller is in pieces
@HeyThe-ge2zs
Ай бұрын
Do the regular top buttons still work?
@Cedric7925
11 ай бұрын
Is any possible just setup K2 and K4, leave K1 & K3 unassigned? Thank you
@kasyoujin
Жыл бұрын
Thank you for the wonderful kit. I'm very interested, when will this kit be available for purchase on Amazon Japan?
@ExtremeRate
Жыл бұрын
Hi, you can order it on exr.gg/44hjdRW since we are not sure when will it available on Amazon Japan.
@oskrto-PC
3 ай бұрын
What if I want to add the hair triggers too
@ronniejoslin7218
3 ай бұрын
when I got to the part to do a self check, i powered on the controller and the blue light flashes. can i ask what this is? it doesnt feel like i can click when i press. please let me know thanks!
@catpersonality66
7 күн бұрын
It comes with the kit
@ibraam2175
8 ай бұрын
Please make this kit in more colors, especifically transparent purple.
@jaibertaborda2774
10 ай бұрын
Excelent product, im so happy transforming my XBOX ONE controller on an elite or professional controller.
@powershots
Жыл бұрын
can i leave out the motors after i desolder them off the board if i wanted to keep them off after installing the kit?
@ExtremeRate
Жыл бұрын
Sure you can!
@arxtixdamien
Жыл бұрын
You can, but why would you like to? If its to save time during a future installation, I can understand that, but if its so they dont rumble, thats a setting you can turn off in the accessories setting 👍. Happy gaming!
@powershots
11 ай бұрын
@@arxtixdamien i wanted to remove weight from the controller :D. weird i know.
@arxtixdamien
11 ай бұрын
@powershots I don't see it as weird, the motors for the rumble give it a lot of weight, and make it very bottom heavy. You can especially tell if you grab it by the center of the remote and tilt it up and down.
@rsownerwhahah
8 ай бұрын
I would love to be able, to buy the motherboard. sepprate from the shell. I want to make my own desing, with my 3d printer. Build looks super cool, very wel manifactured. But i dont like the button choise, and the position its in.
@AKTalal
9 ай бұрын
Are the clickt trigger stops compatible with this?
@Gonxzxauc
10 ай бұрын
compatible with EXtremeRate Thumbsticks Drift Fix Kit ?
@melastname6548
9 ай бұрын
Has anyone came from the hope kit to the victor? And can give comparison for feel? I want to do this but gamerheaven didn’t care for how big the victor buttons were.
@CyborKat
Жыл бұрын
I really want one of these kits, but sadly I lack the required skills to do any of this at the moment.
@ExtremeRate
Жыл бұрын
It's quite difficult because soldering required :(
@Steve-qc4lj
Жыл бұрын
If i have the hope remap kit installed, would I be able to assemble the backplate and connect the ribbon to the fpc connector? Or would i need desolder the hope kit fpc from the controller?
@ExtremeRate
Жыл бұрын
YES! The FPC are the same!
@garay1357
5 ай бұрын
Can I use this with a 7watts rapid fire mod???
@DJSonidol
Жыл бұрын
Could these button can assigned into two buttons in one paddles? I appreciate the hard work!
@ExtremeRate
Жыл бұрын
No, it can't be
@VampNftt
Жыл бұрын
If I already have the HOPE remap kit, can I use the same FPC modules for the VICTOR remap kit?
@ExtremeRate
Жыл бұрын
YES!
@onimusha-nii870
8 ай бұрын
Comprei e estalei com sucesso.exelente kit.
@maxiborgue
5 ай бұрын
Mano, vc sabe dizer se é possível mapear os botões de clic central dos analógicos nesse kit aí?
@user-jg6ht9hm2k
Жыл бұрын
Can i remap multiple keys to back button? For example i want remap lt+rt+w keys to backbutton
@ExtremeRate
Жыл бұрын
No
@a_s10_blazer
Жыл бұрын
Does the abxy clicky and flexor x clicky trigger kit work with the victor x button kit?
@ExtremeRate
Жыл бұрын
Sure!
@Chastor97
11 ай бұрын
Only 2 colors 😢 My robot white one is waiting victor x white
@brianholcomb933
7 ай бұрын
I would just leave the rumblers. I never use them and it’s just dead weight for me.
@ayudrs
Жыл бұрын
What are the differences between this new remap kit and the older Hope remap kit?
@ExtremeRate
Жыл бұрын
The place of the back buttons are different, and you can save 6 mapping profiles on the Victor kit
@ayudrs
Жыл бұрын
@@ExtremeRate thank you
@JESUSPIECES
10 ай бұрын
Can you map keyboard keys to the K’s?
@marionbutlerjr1
6 ай бұрын
Do we need to solder
@JESUSPIECES
10 ай бұрын
Can you remap rb+Lb ? To one of the k’s
@Red-xGST
11 ай бұрын
Hi what if we don’t have a sauta heat thing can we still do it
@backwoodsroll
11 ай бұрын
Soldering gun no man you can’t
@sphericalred
Жыл бұрын
Are you discontinuing the Chrome Gold Xbox Series X button set? 🔫😢
@ExtremeRate
Жыл бұрын
Why? We will never discontinue the chrome gold button set
@dannydavito201
10 ай бұрын
It's nice but I find the buttons quite stiff, I've opened it up again and loosened the screws holding the buttons as I thought they might be too tight and feels slightly better, would prefer to feel me clicking the button
@leethornton85
10 ай бұрын
My buttons are the opposite there verry loose and now when i press they dont even feel like they click tsken appart and all scres are tight and everythung isbhow iy should be but still loose and now dont click when i shake my controller all you hear is the rear buttons moving about
@dannydavito201
10 ай бұрын
@@leethornton85 are they aligned properly
@leethornton85
10 ай бұрын
@@dannydavito201 yes all inline correct and tight
@dannydavito201
10 ай бұрын
@leethornton85 maybe the actual plastics buttons for ours are different as in the centre of them yours might be sunken in more and mine might be to pronounced
@leethornton85
10 ай бұрын
@@dannydavito201 yeh this is what the issue is 100% i have the purple kit and sombody else having same issue on amazon review so maybe manafacture defect with this colour. Spoke to custmer service and they said they send a new pcb with the buttons but im trying to tell them the buttons work when i remove the pcb and push with my finger and buttons are very loose when its installed so this can only be the issue as all screws are tight
@michaelenns8872
11 ай бұрын
Is there a tutorial for opening the case of the controller hahaha
@KC_95
Жыл бұрын
when is coming for ps5??
@andressazo8033
4 ай бұрын
Jajaja en la primera generación de los gatillos cuesta mucho colocarlo
@Obito-Uchiha492
Жыл бұрын
Is this available for one s controllers or only series s?
@ExtremeRate
Жыл бұрын
Please check the ONE S version here: kzitem.info/news/bejne/2WhmsI6iopiEgJg
@Obito-Uchiha492
Жыл бұрын
I will do thanks 😊
@MALOYVITTY
6 ай бұрын
20:33 оба комплекта пришли без этой штуки.
@FranciscoGarcia-ru8yj
Жыл бұрын
Buenas tardes ahora faltaría uno igual para el dualsense si soldar como el remap del 030 que adquirí si sale uno para ps5 lo comprare
@ExtremeRate
Жыл бұрын
Hola, estamos trabajando en un nuevo modelo para el controlador de PS5, estad atentos.
@sage9878
7 ай бұрын
Ngl, this shit was super misleading on amazon. Anyone who's thinking about buying this, don't bother. It's much safer and easier just to buy a pre-made controller.
@ujapones
Жыл бұрын
for dualsense pls
@ExtremeRate
Жыл бұрын
Yes sir!
@ujapones
2 ай бұрын
@@ExtremeRate Don't delay please, I'm waiting for it
@MasterAct2009
Жыл бұрын
at PS5 Controller too pls 🥺
@ExtremeRate
Жыл бұрын
Please stay tuned!
@pavogear9190
Жыл бұрын
Looking forward to when it will be available on Amazon 🤩 @extremeRate do you know when it will be available for order on Amazon
@ExtremeRate
Жыл бұрын
It's available, please check the links in description
@saguenn
9 ай бұрын
My controller has a constant bips when i power it after soldering and leds wont turn on. All solding points look good. Any idea what could be the problem?
Пікірлер: 105