Holy $hit much love man. Awesome video. You made that look so easy. Its 420 a.m. just smoked an L after freaking the wifey... and I was thinking about how to marry the PCB TO THE MOTHERBOARD. I mesmerized all 7 mind of it. Thank you
@LukeDuddridge
12 жыл бұрын
I have used this method on the chunky models and it works exactly the same. As long as the DVD model numbers match you should be fine matey :)
@kibubkibub
11 жыл бұрын
@Aceroth9 yes you need to check what DVD model you have and buy the same one. Usually it's dg
@RobertCampbellCapital
10 жыл бұрын
Excellent video! Well done.
@MrLunchbox1112
10 жыл бұрын
Thanks. worked like a charm :)
@cmarkezic
12 жыл бұрын
You sir are my hero, thank you!
@TheSinn616
11 жыл бұрын
Yes that PCB is already married to that motherboard so your place the DVD reader to the PCB. And you wont get booted or $hit like that. This man did it smart. No need for JTAGing for that slim model the man manually over riding it. Somebody slam themselves
@arapig
12 жыл бұрын
@kibubkibub that solder looks pretty sweet what power does it need to be?
@gutierrezgonzalo
3 жыл бұрын
Worked for me! Thanks!
@kibubkibub
3 жыл бұрын
Its good to see that its still useful.
@WhatFreeMarket
12 жыл бұрын
Great video - All fixed ... Thanks
@kibubkibub
12 жыл бұрын
You the reason i did it :) Thanks
@Kalywonkas
12 жыл бұрын
What is used to melt the solder (Some of saying wires) Is a soldering iron, they're about £10-15
@kibubkibub
10 жыл бұрын
It is possible that its lens so i recommend to replace the lens first. To do that you need to open the drive and replace the lens (you can find many youtube on how to do that). Lens will cost no more than 5$ on Ebay but make sure you order the right one by checking your drive model.
@Pulsebass
12 жыл бұрын
Amazing... just answered my question..
@arapig
12 жыл бұрын
@ArtyChunks beacuse there's a drive key file on the board and if you don't swap the boards your xbox will be detected as modified and you will get banned even if you haven't done any flashing. If you have the equip you can copy the board key file and get it on the new one so you don't have to swap.
@kibubkibub
10 жыл бұрын
Yes you can do that but if you know the basic soldering so its easy and faster, no risk.
@consciousnesswarrior
13 жыл бұрын
Thanks for the vid, bros. Now I just need to know where to get a new drive. I'm guessing once you swap the PCB to the new drive and solder it, connect it the thing will be good to go?
@EDECO79
9 жыл бұрын
Toddler managed to open the tray and then use it for a step. Took care of that. Why does Microsoft design stuff like this? Gee, on my PC a ROM drive dies, I drop in a new one in about two minutes. Now I either have to dig out my soldering kit or flash something. Ridiculous. Let me guess, security crap? Not sure if I will even bother. I am about done with consoles anyway, tired of anything that still uses moving parts.
@stephen8898
11 жыл бұрын
Hi is all the xbox slim DG-16D4S the same it says uinlocked and works for all slim just to change the key (pcb) cause i bought one from amazon trying to fix mine.
@kibubkibub
10 жыл бұрын
No you can't there is unique key that you need to flash to the new pcb so its will match the motherboard. But i think you can find a universal pcb that called unlock and its cost like a full hard drive (around 70$)
@L1V32Die
11 жыл бұрын
what is that tool you use to heat the 5 smaller cables to take them off?
@ciprodriguez
11 жыл бұрын
If your are just swapping board into a new DVD drive due to bad motor or laser you can just take out the drive assembly and swap that so you don't have to soldier anything
@Aceroth9
11 жыл бұрын
Is there a specific kind of replacement DVD drive that you need to buy for this to work? Does it have to be an "Xbox 360 drive" or will any drive do?
@tbush1994
12 жыл бұрын
And this is why I own a PS2...
@LilCHunky23
11 жыл бұрын
I have another question I was removing the old pcb board and two of the little connectors came of the board do you know what I can do about that
@goku10119
11 жыл бұрын
Which wire is connected to the power? No power is going to the drive after replacing the PCB and I'm trying to figure out what I messed up here.
@harwoodhomies
12 жыл бұрын
Do you think it would work if you just spliced the wires instead of soldering them?
@kibubkibub
11 жыл бұрын
Yes you can splice the wires together its will not efect the DVD Just make sure that you Isolate the wires.
@greggmccambley7655
10 жыл бұрын
All it does is try to spin maybe once and then it says "Open Tray"... thats it.... if its just the lens, do I still have to do what you did in this video? Or is there a quicker technique? Thanks for the help fyi
@TheGal9989
12 жыл бұрын
do i have to desolder the other PCB that is in the drive because i dont know anything about soldering/desoldering
@kibubkibub
12 жыл бұрын
If you can do that soldering so you go to electronic store and show them the capasitor and do it your self. If you get another board off Ebay you will need to Flash it before not just plug and play.
@ninamariericci
11 жыл бұрын
I have a Dg-16d4s drive. Can I replace the drive with a Dg-16d2s drive but keep the Dg-16d4s board?
@ProjectileDart
11 жыл бұрын
Would i need a new dvd drive? Cause ive had disc unreadable since october, september last year and it adventurely got to the point the discs carryin on spinning when i opened tray to close it to get it to read. Not long after i got a new laser and it stopped the spinning when open tray but most of the games that worked on old laser don't work on new laser and all my games work on my mates xbox. Please Reply
@err0r404s
11 жыл бұрын
If I had a PCB from a 16D4S and wanted to put it into a 16D5S would it work?
@valko007
12 жыл бұрын
do you need to extract the DVD keys before replacing the PCB ?
@kibubkibub
12 жыл бұрын
Yes its will work . I did it ones my self :)
@elemix27
9 жыл бұрын
You said "flash guide" you did not do any flashing.
@TheGhost525
12 жыл бұрын
does this method work with a regular xbox 360 thats not slim? or is this method solely for a xbox 360 slim please let me know thank you
@steeler7663
12 жыл бұрын
I took a dvd drive from my very original slim and put it into a new one i found whose dvd drive was jammed. Everything turns on but the disc wont spin up or be read will this fix it?
@greggmccambley7655
10 жыл бұрын
So my xbox isn't reading disc and so I am clearly assuming its my disc drive..... would I have to buy an entire new disc drive, or could it be the laser? From what I'm seeing on KZitem, that seems to be a big problem.... are these two problems one of the same, which both lead to this solution? Thanks for the vid
@BrockDRock92
11 жыл бұрын
What tool do you use to sodder off the wires
@LegitifyFILMS
12 жыл бұрын
This is very helpfull But Do i have any options if i dont have The old PCB board Can i flash the drive Maybe?
@tbush1994
12 жыл бұрын
Makes sense. I agree. I wonder how many people were expecting us to come to blows over a KZitem comment lol XD
@kibubkibub
10 жыл бұрын
Do you get any error or just its not reading? is the disk spin inside? most likely its lens (easy and cheap fix)
@kibubkibub
11 жыл бұрын
What was the problem with the drive at the beginning? Its may be the PCB problem not the drive.
@MrGodzooki77
10 жыл бұрын
Please help I did all same steps but now it won't stay close just keeps popping open even when power is off
@stephen8898
11 жыл бұрын
hey can u reply i just switch pcb board i wont get banned will it work without flashing
@ScubaModz
12 жыл бұрын
Idk if you would know the solution. But when I connect it to the Xbox again. The drive just spins really fast and the tray won't open
@LilCHunky23
11 жыл бұрын
What wattage was your sauter
@ladiesman6592
10 жыл бұрын
so my xbox dvd drive is broken.. i opened it up and found that my disc spins up and then stops. laser turns on and moves. is this what i have to do? my friend (no real expert) says the motor that spins is broken. what do you think? ; before i go and spend 45 bucks on a new dvd drive with the same model number.
@Brabbit1161
11 жыл бұрын
My problem is when I put the board back in the laser cant run along the full tract on the bars, it bumps into the board. Please help lol
@ArtyChunks
12 жыл бұрын
Why do you have to replace the board though?
@kibubkibub
12 жыл бұрын
You must do as show on the video in order for the drive to work ! So yes do it!
@StarGateTech
11 жыл бұрын
What song is playing? That's some great music!
@tbush1994
12 жыл бұрын
No I have an Xbox 360. And I love it dearly. But I've never run into ANY problems with my PS2 and I just feel grateful for that; on the other hand, my Xbox has had a few problems here and there, namely the disc drive issue - more than once I had to actually fix it. I'm just saying.
@BOKAJAN1997
11 жыл бұрын
do you have to do all this?
@kibubkibub
11 жыл бұрын
I'm not sure but i think its the red one (you can check with voltmeter)
@kibubkibub
12 жыл бұрын
That because the ps2 its CD drive reader and the xbox have the DUAL LAYER dvd drive that use different lenss and the mechanisem its more complicated. Also tape cast never have problem but mp3 player always have problem :( That different technology.
@Truman45B
11 жыл бұрын
The pcb was diff and the plug in for the eye is
@kibubkibub
11 жыл бұрын
For the slim xbox there is only one power supply, but for the Xbox 360 there us 175W 150W and 205W the higher is better.
@jh4101
10 жыл бұрын
why re solder wires? couldn't you just strip the wires and use compression connectors without risking heat damage or whatnot?
@curemymind
11 жыл бұрын
There is an easier way to do this... Just remove the entire laser assembly. See those 4 big on the top allen type screws? Remove those and you don't need to solder anything, Just make sure to clean out the old housing and grease it up a bit. No soldering required. If you need to change out a motor then un solder those and solder them back into the old housing. It is a lot easier then soldering on to the board for those that don't know how to solder..... Nice video but not a 5 star video...
@plsdonttryme
6 жыл бұрын
Thanks! i just got the "open tray" error yesterday and decided to replace the drive. No soldering gun, so I'm going to try your suggestion first.
@plsdonttryme
6 жыл бұрын
Worked like a charm...thanks again for the suggestion!
@kibubkibub
11 жыл бұрын
Soldering Iron, you need just to heat the connector and pull the cable.
@chibixmanga
11 жыл бұрын
it stopped reading disks all together i got a new disk drive and did the switch just like this and still never worked im just going to buy a new xbox cuz iv been trying to fix mine for 6 months
@kibubkibub
11 жыл бұрын
I think its Talamasca but i'm not sure.
@prizewell
13 жыл бұрын
what's this song called?
@curemymind
11 жыл бұрын
Either that or do what he did if you want the new housing. Or you could just program the new chip, which you will need a sata to usb which can be found on ebay for cheap. Reprograming software on your windows. Leave the drive connected to the power on the xbox and the sata to usb to your computer. You will have to keep pressing the eject button so xbox doesn't go to sleep... :|... not a 5 star video but good enough :)...
@kibubkibub
11 жыл бұрын
You can get it on eBay
@kibubkibub
11 жыл бұрын
I dont think so. You will have to flash it with the 5S firmwire
@kibubkibub
11 жыл бұрын
You must!
@curemymind
11 жыл бұрын
You only got the laser?You could of gotten a bad laser.Buy the entire dvd drive, change out the laser housing.If it still does the same thing it could be the logic board went bad on you.Then Just put the laser housing back on to the new drive and reprogram the logic board. You will need a sata to usb cable which are cheap on ebay and your xbox :) for PSU to the dvd drive. Just keep hitting the eject button so the xbox doesn't go to sleep while programing the new logic board. Google the software.
@kibubkibub
12 жыл бұрын
you can find electronic guys to do it for you. With the right tools its take less the n a minute. Good luck
@ffhjfhfjhf
12 жыл бұрын
nice 1 dude but my drive is noisy as fu-- sounds like you have game disc in and its chewing it up , this video helps loads RESPECT but need strip make few mods NICE 1 FOR VID AND MANY THANKS DUDE
@JZ7662
12 жыл бұрын
because the PCB board is locked to its own original Xbox. that's why you have put in the one locked to yours. if you don't, then it wont work
@jackaljr666666
12 жыл бұрын
I did this and it say Open tray after 1/2 a second of reading.
@alexacevedo4645
2 жыл бұрын
Mine don't have different colors wires , no wires, the model is DL10N ,
@kibubkibub
2 жыл бұрын
This only for Lite-on models, I’m not sure about other drives
@kibubkibub
10 жыл бұрын
Cant be! if the pcb not replaced the dvd cannot work.
@kibubkibub
11 жыл бұрын
So you got a fake drive. but its will work just switsh the PCB Board.
@cRaZyKiD818o
12 жыл бұрын
i found 2 magnets when i open my?!
@kibubkibub
12 жыл бұрын
No its different DVD Drive.
@stephen8898
11 жыл бұрын
hey bro i bought this New - Microsoft Xbox 360 (Slim) DVD Drive Unlocked - Phillips: Liteon (DG-16D4S: 0225) 9504 Compatible
@kibubkibub
12 жыл бұрын
No need key , the all idea is to swap boards.
@kibubkibub
11 жыл бұрын
@L1V32Die Solder iron
@Truman45B
11 жыл бұрын
I payed 80 $ for a drive that has all the same numbers on it and the internals were diff
@kibubkibub
11 жыл бұрын
So smoke another one and go for it, its easy :)
@chibixmanga
11 жыл бұрын
i did this and still doesn't work
@Truman45B
11 жыл бұрын
That's the problem
@kibubkibub
11 жыл бұрын
No need its very simple soldering.
@Truman45B
11 жыл бұрын
Not the same sorry I keep hitting done on my phone
Пікірлер: 96