Love the video buddy this is a job i will be doing again next summer. Following my fathers advice ... he would always keep Bushes in a plastic bag in the freezer over night until i was ready to fit them. After the old bush is out clean the area and use a heat gun to warm up the metal on the car component for 10 minutes then get the bush from the freezer and it just slotts in the hole. Science is a wonderful thing for time saving.
@paulfidler3710
2 жыл бұрын
I love how this was almost in real time. Gives me an indication of how long it will take. Great job.
@MewsJaguar
9 ай бұрын
Fantastic video, I liked the honest approach including pitfalls. Think I'll have a go myself now I've seen you do it
@user-mg2zu7hj5t
5 ай бұрын
5:34 - the control arm will STAY out of the way if you loosen its rear bolt. This also helps when it comes time to put the bolt through the new bushing, by providing a bit of play in the setup.
@mugmushrooms9845
17 күн бұрын
Great work, you did it 20 mins. I'm sure it'll take me atleast 1 hr to do this and few bolts will be broken or stripped in middle 😭
@peaandham1973
Жыл бұрын
Great video thanks. Did first side last night. Got the same bush kit, used it a few times, last time on my washing machine inner bearing,was perfect. I cut the brake bracket bolt off using a £27 mini grinder which was perfect. Other side tonight. Cheers
@cbv8
3 жыл бұрын
The struggle was real but you got there in the end thanks for the video.
@kieferste
3 жыл бұрын
Thank you for watching
@Thecarislife
3 жыл бұрын
I keep looking for videos on jobs I need to do on my recently acquired xc90 and keep finding your vids. Great work 👍
@kieferste
3 жыл бұрын
Thanks alot I have a few more coming if you need any help let me know
@foostyman
10 ай бұрын
Good video. Saved me a ton of messing about
@poseidon201
Жыл бұрын
great video, thanks got to do mine, this video will make the job a lot easier.
@ZEODE
6 ай бұрын
Nice video, I’m about to do the same job. This has helped so much 👍🏻
@jalilconley-anderson3584
Жыл бұрын
Worked great but save time get a impact. Or you will be in this kind of trouble! Great video
@willmill409
Жыл бұрын
Thanks for the helpful video but I'd fedinitely suggest a ratchet and socket or impact instead of box wrench so you won't be so tired after this job lol
@bearpapa121
Жыл бұрын
sehr gutes Video!
@JB-su3bi
2 жыл бұрын
Thanks for sharing. Can you tell me what were the symptoms of this bush failing?
@JB-su3bi
2 жыл бұрын
Also.. it may help to put the new bush in the freezer overnight before fitting..
@danbell4067
3 жыл бұрын
Got a link for the kit mate?
@asbernt
10 ай бұрын
Grrrate🙂 But where can I by these bushings? Imposible to find here in europe
@abood_abtv4203
3 жыл бұрын
Do you have a link for the kit used to remove the old bush and push in the new one
Hi, how u doing? what the bushing removal kit do you use? I need to make same procedure
@kieferste
Жыл бұрын
Yes good thank you its just a universal kit off ebay my friend
@eatmycomments
2 жыл бұрын
Is there anything which stops you destroying the old rubber to get it out rather than pressing?
@kieferste
2 жыл бұрын
You would need something to fit perfectly it the hole to push it out as 1 piece and plenty of wd40
@timmywikman6877
Жыл бұрын
Great video, is it 2 bush kit? Red and the blue box? Both from Ebay?. I think i need to do the same job on my xc90 to.
@kieferste
Жыл бұрын
I believe there just different colour boxes as long as it's the full kit you should be ok
@timmywikman6877
Жыл бұрын
@@kieferste Ok, but I mean you use 2 diffrent boxes in the video, or it is another tools in the blue one?
@JB-su3bi
2 жыл бұрын
Thanks for sharing. Can you tell me what are the symptoms of this bushing failure? My 2008 XC90 feels really ‘loose’ at the back end, very hard to keep her going in a straight line on a straight flat road.. could also be the front control arms? Thanks
@kieferste
2 жыл бұрын
When you hit a bump does it bounce to one side if so it's the top bush I'm going to make a video on it the weekend but that one in the video it was wearing the tyres off
@samirgodiriahi1453
9 күн бұрын
@@kieferste on the inside? I think i have the same problem
@neiljostmeier7415
2 жыл бұрын
Hi could you tell me where you got the bushes from please I will be attempting to do mine when ordered the bushes thanks
@kieferste
2 жыл бұрын
I got mine from my local motor factors I'll try get you the part number
@neiljostmeier7415
2 жыл бұрын
That would be great if you could
@kieferste
2 жыл бұрын
9169204 is the part number
@cledwynjones2694
9 ай бұрын
great video, thanks. when pushing the new bush in, did the disc on the plate just push the rubber centre of the bush flush before making contact with the metal barrel? on my replacement bush the centre protrudes wider than the barrel. I presume there’s no risk of this cracking the rubber?
@ovlov245
8 ай бұрын
Bashing the kit isnt a good thing.....Soft hammer if you must . And BUY A RATTLE GUN!
Пікірлер: 39