Not in this situation or with this model but after getting an overview from the site, I'm impressed a person noticing a design flaw with a cast-iron that bends under heat and pressure and then goes out on a crusade to design and CNC the part and also produce it for others and make a tutorial so the average skilled consumer can DIY repair a Chinese product that is difficult to get any service for, here in the west. internet repair community at its finest. Well done, cheers from Denmark.
@yssiang82
2 жыл бұрын
Hi Nikos, thanks for the detailed guide and pinpointing the culprit of the vertical line issue. I couldn’t repair the projector myself without your guidance in this video. Thanks again for sharing this rare repair guide.
@nicolaschancel58
7 ай бұрын
I never add any comment on youtube but i want to thank you for this tutorial ! I just repaired my xiaomiprojector having troubles for the last 8 months thanks to your perfect video. Have a nice day and once more thanks !
@projectorjunkies4152
7 ай бұрын
you are welcome my friend
@adrianzapata308
Жыл бұрын
Nikos! Thank you so much for your help. I got the plate from you and installed it with your video. It worked! Slow boot up now a thing of the past!
@akaANUNAKI
3 жыл бұрын
Just did my repair with the metal repair thing you send... everything now works as new! THX a lot from Russia with love! ))
@Vic-hl7wm
3 ай бұрын
что у тебя не работало?
@akaANUNAKI
3 ай бұрын
@@Vic-hl7wm экран был черным, не показывал картинку. Отходил шлейф главный, который с завода прижимается какой то силуминовой пластиной. Со временем из за температур это пластина деформировалась и контакт прерывался. По началу можно было чуть стукнуть, потом надо было просто подождать минут 5 пока прогреется, потом уже ничего не помогало. Пробовал сначала прижимать чем то но не сильно помогало. У него заказал стальную. Уже 3 года полет отличный.
@Vic-hl7wm
3 ай бұрын
@@akaANUNAKI понятно... в России нет мастерских такое исправить? у меня стекло внутри начало потеть от вэйпа, надо было разбирать и чистить... не одна мастерская не хотела за это браться в штатах, так как у них нет договоров с xiaome! А вообще, 5 лет проработал отлично.
@akaANUNAKI
3 ай бұрын
@@Vic-hl7wm тогда вроде не было. А если и были то я не искал. По сути не обращался потому что официально никто сюда не вез проекторы такие и ожидать месяц чтобы сц сказал что ничего не могут сделать не стал. Просто погуглил, наткнулся на мою проблему и решил ее собственноручно. Дешевле и быстрее вышло. Разбирается довольно просто и деталей не много. На счёт запотевания не сталкивался. Там по сути поликарбонат и под ним линза. Разобрать и посмотреть где запотевает и протереть. Либо если поликарбонат отнести на полировку. Если линза боюсь это либо сложный разбор либо замена.
@-buldog1696
3 жыл бұрын
Hello Nikos Thank you very much for this video and all the work you have done for the repair of the Xiaomi 4K video projector MJJGTYDS01FM and for the new Plate that you have created in laser numerical control with the details of the holes to tap frankly me who am a manufacturer of job I appreciate the work you did,
@projectorjunkies4152
3 жыл бұрын
You welcome my friend!
@roycapatoy3330
11 ай бұрын
@@projectorjunkies4152 Is the plate still available, having same probem with my A300? Thank
@anthonydavidson5277
7 ай бұрын
Is this the process of replacing bad pixel?
@thibaultgrad3708
3 жыл бұрын
Thank you for the tutorial and the part it worked like a charm ! This is THE solution to long time boot, vertical lines problems of the xiaomi 4K laser projector.
@j.a.y.1680
2 жыл бұрын
Nikos, thank you for making the plate for me. It was worth every penny. I followed your instructional video step by step, and it worked to perfection. The picture quality is just like when the unit was new.
@spymike8235
Жыл бұрын
Hi, do you know where I can get the plate?
@florent7322
Жыл бұрын
@@spymike8235 You can contact Nikos using the website in the video description. I asked him 3 / 4 weeks ago and I received my plate some days ago.
@noeljoshforu
3 жыл бұрын
I had this same issue after some 1.5 years and the boot time for the projector was approx 4 minutes with vertical lines which will eventually disappear in 4 minutes when the projector warms up. I ordered the contact plate from Nikos & it reached India in 16 days. I just followed this video and the repair is quite straightforward, however its not very easy as well. The repair needs Philips head screw driver of various sizes, tweezers, and some plucktrums. There were few difficult places, but otherwise it can be done by anyone with some little experience with electronics. After replacement, the projector works as new and no vertical lines of what so ever. Once again thanks you Nikos...
@aslamsaleem7050
2 жыл бұрын
How did you order ?? I’m also from india and I’m facing issues like it turns off suddenly without any warning
@jeanbedo
2 жыл бұрын
Dear Nikos, Thanks a lot for the video. Without I was very nervous. And then I found the video and it went smoothly. You rock !
@EliaGrady19
2 жыл бұрын
What a MAKER soul! Kudos!
@fitchou83
6 ай бұрын
Hi i’ve the fengmi 4k 2021, everything was fine for the last 3 years and today i wanted to change de fastfocus after months without no settings change and i discovered the fastfocus is « broken » it’s not working anymore and the top part of my screen est full blur 😢 do you have any idea what i can do? Best regards and thanks for your help 🙏
@Ary-vs1lm
3 жыл бұрын
Hi Nikos, I have finally found the detailed mounting video. I feel more comfortable to do this after having watched this video with the new plate I have received from you. I have 2 questions : do you put alcohol on the cotton bud before cleaning the piece of metal ? Where did you buy the metalic tablecloth. Amazon ? Seems great Thanks again
@MrJunglahot
2 жыл бұрын
Thanks for the video, i read about it last night in a forum and wanted to see how complicated it is. It is quite a video, and of course difficult. I don't hsve that problem yet. But my projector when starting is really loud and I hate the sound of it. I thought that were the fans but I saw you changed yours and no differences so, there is not a simple way to reduce the noise from the projector at all, right?
@omniking3479
2 жыл бұрын
Damn ...what is this 🎼score again, I'm over here nodding my head off😆🎶🎶🎶 BIG orchestra conductor Energy 😁
@bebedaily
Ай бұрын
I have an old white xiami one and always have the auto turn off issues. And now it just say the fan is not working and turn off automatically, would this be the same issue? Sorry to take your time. Thanks a lot 🙏🏼🙏🏼🙏🏼
@sparcotjen
3 жыл бұрын
Things like this are what's stopping me from buying a chinese UST projector at the moment (+ the coil whine). You would think one of the designers/engineers would have fixed this plate with the new models but as I've read in your post this doesn't seem to be the case...
@Netboosters
2 ай бұрын
Same problem here...the first white pixel is appearing on the screen. Where can I get the replacement metal part, and what partnumber is it. KR, Eric
@thomaslin4242
5 ай бұрын
got a dead pixel on my Hisense ultra short throw projector lately. lucky the warranty expire next month. A technician supposed to come today but had to reschedule because he said he have never work on one before. I hope i on't see him watching your tutorial to fix my device next week...
@sanich79
3 жыл бұрын
Спасибо, хорошая инструкция. Тоже надо отремонтировать свой проектор.
@al7aker
3 жыл бұрын
I like your style of music 🎶 👌
@miroslavumlauf9967
2 жыл бұрын
To everyone out there facing this problem with vertical lines - try to tap/move a bit main cable in the middle to see if it does not help with the problem (the one being lifted at 7:38 of this video). I have got the better part from Nikos last year, but eventually the problem reappeared. I did dis(assemble) this projector about 20x by now, and currently tapping cable is what fixes the problem for me, and making sure it is not pushed by anything when assembling back. Showing myself the effect of tapping in this video: kzitem.info/news/bejne/s2iC25mnsl-bfn4
@HAPPY2ISI
6 ай бұрын
Hi Nikos, first of all great work. I very rarely write a comment, but I just had to write one.... YOU ARE AWESOME. Now to my question, are you selling the metal part? I haven't found it anywhere. My projector is now making these white lines. Hope you can help.
@nobyjoy
Жыл бұрын
hi, for the me only teh HDMI ports of the projector is not working. Have you come across this issue before? the projector works fine, but the HMDI ports does not detect the input device. Can you help me with a solution?
@voyagedaventure3932
Жыл бұрын
Hello @nikos do you know any place where we can purchase parts of this projector, i am not having this issue but having issue with color, there is green/purple tint in some scenes with bright light, maybe because of faulty optical engine.
@Sencetilk
7 ай бұрын
J'étais curieux puisque j'ai complétement modifié mon vidéoprojecteur led je peux tout réparer ou changer dessus zero obsolescence, mais le laser c'est d'une autre planète
@kastrolon
Жыл бұрын
thanks for your help and the new plate. UST seems to be working again! Did you replace the thermal paste?
@waynedawber4859
3 жыл бұрын
Hi I need replacement fans (right hand side) as they are starting to fail. Any advice on where I can purchase them?
@BaccaratBaccaratato
6 ай бұрын
I have A300 projectors having the same problem. Your video is a great help to know, i am not savy to do the repair myself. Is anyone in Singapore able to repair for a fee?
@muhibhoque6925
3 жыл бұрын
Hi Nikos - Do you know if this is an issue on the new Mijia 1S 4K DS02 2020 version at all and whether Xiaomi have corrected this issue? Thanks
@dexter19885
3 жыл бұрын
I'd also like to know this.
@ebow7964
3 жыл бұрын
Hi i have the 2020 version all working fine and i know there were improvements made like full color wheel and laser temperature monitoring so i think they would of checked out any issues 👍
@dexter19885
3 жыл бұрын
@@ebow7964 It seems the issue doesn't arise the first year or so after several hours of use. How much have you used yours?
@ebow7964
3 жыл бұрын
@@dexter19885 Hi Ive run mine for 50hrs + now and no problem with the 2020 version , bear in mind theres tens of thousands of these out there and most are working fine 👍
@dexter19885
3 жыл бұрын
@@ebow7964 I just think that if they all have that same metal plate, the issue should be widespread after a year or so. But I'm really interested in the projector - it just seems like a huge risk as the service from the sellers seem to be non-existent.
@user-wo8gv6uf1q
5 ай бұрын
Спасибо за видео, Никас! У меня такая же проблема. Вертикальные полосы на половину экрана. 2 вопроса: 1)можно заказать пластину? 2) или нужно менять чип Dmd? Напишите Вашу электронную почту, как с Вами связаться. Спасибо! 1) можно заказать пластину
@TMueller
Ай бұрын
Hi everyone, I have a Xiaomi Mi 4K Laser Projector 150" and I'm experiencing an issue where the projector only displays one color after a short time of use. When I first turn it on, the image appears normal with all colors working correctly. However, after a few minutes, the screen shifts to displaying only a single color (e.g., red, green, or blue) and the other colors disappear. Has anyone else experienced this issue? What could be causing it? I suspect it might be related to overheating, a failing laser, or some issue with the power supply. I'm not sure if this could be a hardware problem with one of the lasers or perhaps a cooling issue. Any advice on how to diagnose and fix this would be greatly appreciated. Thanks in advance!
@spymike8235
Жыл бұрын
My Projector is not turning on anymore. When turned on it just makes a loud beeping sound and shutdown. I think it is the bend Plate. Where can I get the plate from? Thanks in advance
@JohnWoo
11 ай бұрын
How thick is that thermal pad if you don't mind me asking?
@3apa3ho
3 жыл бұрын
Hi! My laser lanp suddenly stopper working today. Worked yesterday. Now there is no image, obviously, but there is sound. Projector is 1.5 years old. Is it the same repair procedure?
@gandolfo_
3 жыл бұрын
I suppose no. I had to replace the curved plate several months ago (successfully) and yesterday my lamp or laser died and now I’m more or less in your situation. In the next days I will dissemble it again and maybe I have more info. Please contact me if you resolve it.
@3apa3ho
3 жыл бұрын
@@gandolfo_, thanks for your reply. I managed to get to the bottom of this - it happens when there is no device plugged into HDMI1. And you have to plug it really hard - any slight cable movement will turn the lamp off. This is annoying of course, but since I don't touch those cables and don't haver any too small kids or animals playing with them - can live with the issue. Still bothers me though.
@user-fc5ns5ko8l
9 ай бұрын
@@gandolfo_Hello. Don't have any image at all? Or is it barely visible when the lights are off? My brightness is very low (the picture is visible only in the dark), perhaps we have similar problems, did you manage to solve the problem?
@Kambei85
Жыл бұрын
Hi Nikos ! Thanks for your job ! I sent you a mail cause I need this New plat. Thanks a lot!
@alesha_piterskiy
6 ай бұрын
Привет всём владельцам такого проектора, подскажите где вы берëте зап части на него, сгорела плата.
@garivant
3 жыл бұрын
great job!
@ds2kx
Жыл бұрын
If we have white dot on screen, this is the same issue and solution ?
@noneofyourbusiness5134
3 жыл бұрын
Nice work. Quick question as I couldn't make out in the video but can you remember if the fans used standard fan headers? Probably not work the risk of opening it up but wondering if its viable to replace the fans with higher quality ones in an effort to reduce noise.
@projectorjunkies4152
3 жыл бұрын
Τhe noise is not from the fans, i have replaced in mine the fans with silent fans, no difference. The noise is from the XPR module and from the phosphor color wheel.
@noneofyourbusiness5134
3 жыл бұрын
@@projectorjunkies4152 good to know, saves a job. Thanks!
@ER-rt9le
3 жыл бұрын
Hello I have a Xgimi A1 UST that did something odd and I’m not sure if you repair these or can advise? Is there a way to contact you? Email?
@samjacob2388
3 жыл бұрын
Great Job, i have a question , I have the Mi 150, it seems the power supply unit in the projector need replacement, do you know where i can find a replacement for it ? Thank you
@user-fc5ns5ko8l
9 ай бұрын
Hello. Why did you decide that you have a problem with the power supply? I have the same projector, and it shines very dimly (the brightness is very low, you need to turn off the light to see anything), I think that I may also have problems with the power supply
@doozledumbler5393
2 жыл бұрын
Was any liquid used on the cotton bud when cleaning the component under the plate?
@ebow7964
2 жыл бұрын
just use IPA to clean contacts and then remove the old heat sink compound and replace with new .
@ilkeryoldas
8 ай бұрын
Can the light bulb be replaced?
@kchbjerry
2 жыл бұрын
Hi, thanks for your video. I have a different issue to yours. My projector suddenly stops displaying anything. It displays a black screen with the front light flashing. Do you know what’s the driver ? Thanks !!!
@user-fc5ns5ko8l
9 ай бұрын
Hello. I have the same projector, and it shines very dimly (the brightness is very low, you need to turn off the light to see anything). Perhaps we have similar problems, did you manage to solve the problem?
@thejasautospa
3 жыл бұрын
Hi Nikos My projector has some dotted lines and when I shake the projector it boots sometime or it takes a long time to boot. Can you send the plate to India and let me know how I can order one
@thejasautospa
3 жыл бұрын
Can you pls reply pls
@eljongabrielserrano2789
Жыл бұрын
Thanks for the video. I also emailed you about possibly purchasing the plate. Wondering if you've received it. Thanks!
@skywalknotpossible
2 жыл бұрын
this might be an illogical question but guys, would you buy the Mi 4K projector again even knowing there is this issue ? If not, which one would you get ? Do the newer version suffer from the same problem ? Thanks!
@jeanbedo
2 жыл бұрын
After 2 years of experience with it, I am not sure I would recommend it: the fans are pretty loud (to replace them, you need to fake the fan speed output), it's very hard to replace the xiaomi chinese android by a generic english android (consequence: some menu and content remain chinese), and finally this issue that seems to happen after 18months of use (the slow bootup or lines). But Picture size and precision is great.
@roycapatoy3330
11 ай бұрын
Where can I get the plate please? Thanks
@patrickthayer4060
2 жыл бұрын
Hi, I have a Vava that only shows a small amount of light. Any tips on finding a repair company for that?
@user-fc5ns5ko8l
9 ай бұрын
Hello. I have the same projector, and it shines very dimly (the brightness is very low, you need to turn off the light to see anything). Perhaps we have similar problems, did you manage to solve the problem?
@GuilhermeBianeck
Жыл бұрын
Any idea about how to clean an internal dust in the lens?
@liumichael
2 жыл бұрын
Do it fix random rebooting?
@edouardchopinaud3771
3 жыл бұрын
Great video ! Any ideas concerning the high pitch noise by any chance. Do you know by what it could be caused ? Cheers
@sparcotjen
3 жыл бұрын
i think i've read somewhere that some kind of 4k upscaling chip caused this. By disabling something in a menu that coil whine stopped. But i'm not sure where i've read that so i cant find it anymore
@ebow7964
2 жыл бұрын
the high pitched noise is caused by the color wheel motor spinning at around 5000rpm this cannot be stopped they may be able to dampen the sound with later design upgrades
@bijayaghimire.6747
3 жыл бұрын
I have a problem with my project . It work 10 to 12 min picture will be off but sound is working. Can you help me.
@skywalknotpossible
2 жыл бұрын
@Bijaya, what version is your projector ?
@ayaanfarooqui
2 жыл бұрын
My projector shuts off saying heat sensor issue will shut off in 5 sec to protect itself I live in India can you help me please there I no local service center here
@akshayshete-cz6pn
Жыл бұрын
I am facing similar issue unit shut off saying fan abnormal. What’s the fix for this ?
@dirtydollsLive
3 жыл бұрын
Hi thanks for you great job!! Can i buy The platea from you?
@aslamsaleem7050
2 жыл бұрын
Where do I get this plate ? I’m india !! Whom to contact , pls help me
@k4rec4
3 жыл бұрын
I have the 2019 version. A week ago the projector started to reboot itself. Now it completely gone off and doesn't power on anymore... DMD Plate problem, or a Power Supply failure? Any ideas? 🤔
@srinivasboddu
3 жыл бұрын
Same problem for me also. It can be started after a long gap by switching the power off. Again problem of rebooting starts within an hour of running. Any solution please.
@k4rec4
3 жыл бұрын
I discovered the problem with mine. It was the power cord. I wasn't using the original one provided with the projector, because of the Chinese plug pattern. I've changed the plug on the original cable and now I'm using it. The projector is now operating flawlessly.
@int53185
Жыл бұрын
looks like heatsink grease on the dmd chip....if its dried out could cause the overheating and warping issue.
@farazdelijani
3 жыл бұрын
good job...
@jaysage976
3 жыл бұрын
How can I get wiring schematic or this?
@---wf4dw
3 жыл бұрын
Hi Nikos, i also Need the Metal Plate! Can have one? Greetings from Germany
@chrisc3825
2 жыл бұрын
Can you repair a VAVA UST projector?
@dzj110
2 жыл бұрын
I have vava UST projector that automatically turn off after a minute or 2? Can anyone help please)?
@syung61
3 жыл бұрын
I would like to purchase the metal plate. Please contact me for more information.
@MrJunglahot
2 жыл бұрын
Hi mate, my projector is starting to fail now... it is not permanent lines and not everything I boot it. But I prefer safe than sorry, is there any webside where I can purchase the piece from you? Thanks 😊
@projectorjunkies4152
2 жыл бұрын
you can send me an email to info@projectorjunkies.com
@MrJunglahot
2 жыл бұрын
@@projectorjunkies4152 Thank you man, I have sent you an email a few days ago. Have a look when you have a second. :D Thank you so much!
@projectorjunkies4152
2 жыл бұрын
@@MrJunglahot My friend i can not find any email from you. Can you resend it?
@MrJunglahot
2 жыл бұрын
@@projectorjunkies4152 Of course, I just did. Take care :D
@MrJunglahot
2 жыл бұрын
@@projectorjunkies4152 I have send you another one, also from the email I got an automatic answer saying that the email is not longer available, I also tried to sudmit my request to contact you through the email but it stay loading forever mate. So i don´t know if you managed to receive the email at all. Sorry for the trouble :S
@mitchellw846
3 жыл бұрын
Have you failed to mention if there is a screw underneath the product label in the centre (where the model number and serial numbers feature) purely because i have got to the stage where you disconnect the top and its met with extreme resistance in the middle part of the projector 😤 Many thanks in advance
@davehammelef6220
2 жыл бұрын
Thats where I am stuck... what was your solution?
@davehammelef6220
2 жыл бұрын
Yes there is a screw under the label at least on my white one.
@kavasmiles
3 ай бұрын
Can't get my projecter to turn on
@mr2cqql
3 жыл бұрын
Is it because of too much heat that cause the metal to bent?
@projectorjunkies4152
3 жыл бұрын
yes, and the pressure of the cooler.
@dexter19885
3 жыл бұрын
It baffles me how a global brand can put out a product with such amateurish defects.
@csrienivas1185
3 жыл бұрын
how to repair, xiaomi mijia hd projector overheat, temperature sensor error
@davidefr
3 жыл бұрын
Very good job!!! I have a problem too with my xiaomi mjjgtyds01fm...the video is completely black! The source light is completely death!!!! You think could be the same issue? Wher canci find the replacement? You sell it? Thank you very much. Davide
@davidefr
3 жыл бұрын
Update: i just fixed my problem!! A flat cable wasnt blocked and when I opened the pj this made the problem. I'm anyway intersted in your plate. Please can you say me how I can buy It? Thank you davide
@bahukirifx3605
3 жыл бұрын
@@davidefr hi, im facing the same issue as yours. No video. What do you mean by cable wasnt blocked? what did u do to fix it? thanks in advance =)
@davidefr
3 жыл бұрын
@@bahukirifx3605 at 9:08 you can see the flat cable that I found disconnected. It wasnt blocked...
@user-fc5ns5ko8l
9 ай бұрын
@@davidefrYou didn't have a picture at all? Or was it of low brightness? What is visible only in the dark?
@pallapasia1630
3 жыл бұрын
I tried repairing but now it is not starting and makes some sound No light is passing How can I contact u ? From India 🇮🇳
@daveworkman5213
3 жыл бұрын
Same behaviour after doing this. I've double checked all connections. Did you ever figure out what was wrong with yours?
@spymike8235
Жыл бұрын
I have the same problem. Did you fix it?
@asalathkhan8664
2 жыл бұрын
i changed the plate now the projector isn't starting up
@kwokpauhon
3 жыл бұрын
👍👍👍
@omniking3479
2 жыл бұрын
Anyone familiar with the JMGO/SA🤔
@theodevries1
2 жыл бұрын
Tried this. Broke one of the screws attaching the plate. Don't be like me. Don't break the screw. anyway, now it is foobar.
Пікірлер: 129