Great tutorial. Thank you. But my problem is the battery. So instead of changing the batteries which is near impossible, I just piggy-back two 18650 batteries connected to the original batteries positive & negative terminals.
@putianren
2 жыл бұрын
Hi Good day. Yesterday I have decided to changed the batteries (2x18650) for about 15 USD. After that, assembled it back. I got fault code > EA0 (the letter A & letter R is the "same" in this digital form) so it can be read as ER0,. I dissemble it again and clean the sensor. Assemble it back, the fault code was different > E8 dissemble it again and clean sensor with a sharp knife by scraping the surface and with fine sand paper & with alcohol. Assemble back, the fault code > back to the earlier code > EA0. So that's it !! I think it will be better to buy new one, LOL. A NEW ONE ONLY COST ABOUT 30 USD ps: if it is the sensor fault, why?? from the beginning the sensor was untouched at all. How did it because faulty on it's own?? Thank you & have a nice day
@ziyadolunay6856
9 ай бұрын
Hi, your information is very good. A thousand thanks. It made me happy to watch them. I changed the batteries. But now the batteries are empty. I can't load it. I tried with different cables. I tried different grips. I tried with a different charging cable. What should I do? Can you help me?
@Ferrys.kennedy
3 жыл бұрын
In my lcd, "E4". What's my problem and how to solution?
@technoaddgyan1632
3 жыл бұрын
I have same pump. My pump motor is working but not inflate tyre. Air is not coming out. Solution please
@yslee2001
2 жыл бұрын
My case was the piston ring which is a rounded rubber ring poped out of the piston, i put the ring back on and it was back to work properly.
@wawa5271
7 ай бұрын
I would advise against buying the Xiaomi bicycle air pump. I bought one and after two years of use, it suddenly stopped working without any reason. It was already out of warranty, and they refused to repair it. My friend also had a similar experience, with the pump breaking just two months after purchase. Fortunately, they were still within the warranty period and could get a replacement at the repair center in Mong Kok. However, it is concerning how easily the pump can break after the warranty period expires. I recommend avoiding this product to avoid feeling scammed, as I suspect there may be a programmed obsolescence.
@tehran_adv
8 ай бұрын
hi,my digital pressure gauge on the device(xiaomi mijia portable) shows about 4 psi less. How can I calibrate the pressure gauge?
@andresote444
2 жыл бұрын
Thanks
@knoxkronik
3 жыл бұрын
Hello bos. Pls help. How do i know if my pump is charging? There is slow blinking white light when charging but after 24 hours charging still no power. Before battery run out, can use without problem. Only problem now is it's not charging. Pls help tq
@HSsharma37
3 жыл бұрын
Thanks a lot buddy.... wil try it and update here
@HSsharma37
3 жыл бұрын
thanks a lot .. mine worked beautifully after cleaning TPMS sensor..
@vascofootballacademy4689
2 ай бұрын
Where can I get that rubbet ring?
@lilpew_beast9988
3 жыл бұрын
Mine was not pumping. It was sucking air.
@putianren
2 жыл бұрын
Mostly like the one-way valve malfunction
@dileepreddy995
3 жыл бұрын
Hi Sir, My machine is not pumping the air from the output pipe. I took it to mechanic and he dessembled and checked. Still could not find where the air leakage is happening. Pls help me
@amithgamer3842
3 жыл бұрын
Same problem
@sunilkh2630
3 жыл бұрын
Me to same issue
@yslee2001
2 жыл бұрын
My case was the piston ring which is a rounded rubber ring poped out of the piston, i put the ring back on and it was back to work properly.
@joycemunar9717
2 жыл бұрын
good day my mi inflator doesnt go down zero but its working when you take out the nozzle it automatic appear in 19 not zero. hope you can help me
@EmilioCachuan
Жыл бұрын
in my pump I get error EAA help
@misbakhulfathoni557
Жыл бұрын
Thank you..
@ryansadega679
Жыл бұрын
How about fixing ERR/EAA code ? Mine keep showing that code. But sometimes it is off directly after several second while pull out the hose. I hope I can get the answer here. Thanks. And God Bless You All..
@mariojones7935
Жыл бұрын
I have error code the same
@raffydabu6552
11 ай бұрын
In 9:49 what did you do??
@lauyongjen
11 ай бұрын
clean.
@joloh6497
2 жыл бұрын
Have no idea what you are trying to do, perhaps some speech will be good rather than just music
@ronedecastro5933
3 жыл бұрын
My unit has never been opened, I got an error display (EAO/ERO) what do you think is the possible solution?
@lauyongjen
3 жыл бұрын
there should be a leak, please check a parts you removed.
@ronedecastro5933
3 жыл бұрын
@@lauyongjen can you do a video tutorial? I really can't find the leak.
@alexanderkulich2456
3 жыл бұрын
There is a small metal plank in video at 8.50. when I took it out on my device, I've found some water there. Dry and and error gone.
@aileenrosebernardo7592
3 жыл бұрын
@@lauyongjen Hi , my unit is not charging , i used any type of c harger but still not charging , what is the problem? Thanks
@agungsaputra2268
3 жыл бұрын
@@alexanderkulich2456 Thank you my ero message is gone, now is normal again, i just clean the part in 08:50 with tissue and problem "ERO" is solved.
@ysondey
3 жыл бұрын
I did that..but another "ERO" on my display Please help
@lauyongjen
3 жыл бұрын
what ERO?
@ysondey
3 жыл бұрын
kzitem.info/news/bejne/qaGJt65vkohioHo here it is frd..thx in adv🙏
@lauyongjen
3 жыл бұрын
There should be a leak,Please check the parts you removed。
@irfannuddin
3 жыл бұрын
PLEASE MAYBE SOMEONE HERE KNOW WHERE WE CAN BUY SENSOR PRESSURE AT 9:21 ??? BECAUSE MY HAVE IS BROKE...
@eliasgus4035
3 жыл бұрын
do you found it? i have same problem
@fty_09
2 жыл бұрын
Hello bro, did you find it? ı must buy it this sensor
@adriandlobo
3 жыл бұрын
They should've provided a reset button
@jpjay1584
2 жыл бұрын
I think its corrosion. not what you can reset with a button. need to scrape it off. maybe the airpressure sensor??
@dr.kunwarvikramsingh3867
3 жыл бұрын
Motor functional but no air output. Plz help
@techstudiojbl
3 жыл бұрын
Air leak
@yslee2001
2 жыл бұрын
My case was the piston ring which is a rounded rubber ring poped out of the piston, i put the ring back on and it was back to work properly.
@SlowMarSlak
3 жыл бұрын
mine is not turn on at all
@putianren
2 жыл бұрын
Battery problem
@adriandlobo
3 жыл бұрын
Too complicated and many didn't solve the problem
@rkovalenko
Жыл бұрын
Насос Xiaomi - error E8. Что можно сделать? Кто может отремонтировать?
@philipusputra6680
2 жыл бұрын
I've got E. Please help me 🙏🏻🙏🏻🙏🏻😢
@ridestories1627
2 жыл бұрын
I get error as E4.. anyone know how to solve this? Appreciate reply.
@josealfredobatallanos9594
Жыл бұрын
yo también, hay alguien que haya encontrado solución?
@ricardodanielrubio3868
2 жыл бұрын
Hola buenas tardes, en la ciudad de México, dónde puedo encontrar quién me ayude, mi compresor enciende un segundo y se apaga, la luz de carga se enciende en rojo y no enciende!
@user-st6hu7ek1b
2 жыл бұрын
Здравствуйте, у меня также, вопрос пока не решён, но проблема думаю в плате управления.
@marrrkyyy1
3 жыл бұрын
omg, i did as demonstrated but nothing happened. Is it mainly the black bit that is covering the metal area??? I cleaned mine off, still E8
@lauyongjen
3 жыл бұрын
please check the pressure sensor connection..
@marrrkyyy1
3 жыл бұрын
@@lauyongjen thanks calvin, which is the pressure sensor? i cleaned the black stuff of the metal contact and screwed the 2 silver screws back
@caandcwarjun
2 жыл бұрын
It is not resolved . Still it is showing E8 error please advise to get the problem resolved
@jepoyx619
3 жыл бұрын
didnt work for me still E8.... huhu
@y_f_a
2 жыл бұрын
Me to.. please help
@mickeyobien1077
3 жыл бұрын
Anyone did this and still E8? I followed exactly on video, and cleaned the sensor, and put everything back, and still was E8
@user-jj2yo9kd7s
2 жыл бұрын
Same situation
@vipultravel
2 жыл бұрын
@@user-jj2yo9kd7s same E8 what to do
@user-jj2yo9kd7s
2 жыл бұрын
@@vipultravel I don't know. Maybe buy a new pressure sensor.
@caandcwarjun
2 жыл бұрын
Still the same it is displaying the same E8 error
@caandcwarjun
2 жыл бұрын
Please help me I have done as it is mentioned in video
Пікірлер: 70