Ho…. My…..oups no that’s wrong ….. let …. Me do ….. it ….. oups that’s wrong ….. ho m’y god….. interesting product but really 3/4 if the video trying to tie your shooelace….. c’mon…..
@temporarilyoffline
2 жыл бұрын
Yes, that was the joke. Glad you were able to pick up on that.
@HamTechRadioScannerDrones
2 жыл бұрын
The handle on the bag would be better on the radio lol - great video i will have a go at the rope , your video really showed me how eventually lol - Many Thanks the side handles look Brill.
@temporarilyoffline
2 жыл бұрын
I want to see your finished product
@DonzLockz
2 жыл бұрын
really cool handles Steve. Also cool how you show all the failures, it means you are human like us. :) Finally, it looks awesome and is very handy!👍
@lyledal
2 жыл бұрын
Human like us? That's what he wants us to believe, Don! 😉
@temporarilyoffline
2 жыл бұрын
My strategy is working
@temporarilyoffline
2 жыл бұрын
Well... almost working.
@vincentcimino1963
Жыл бұрын
Can you please give the model Bovke case you were using please? There are several models and similar. One for GPS, Hard drive or night vision? Thanks
@temporarilyoffline
Жыл бұрын
Here is the full review: kzitem.info/news/bejne/uoJvz5eujYWYZJw and the follow-up: kzitem.info/news/bejne/1G6Vsat7n4CYd34
@vincentcimino1963
Жыл бұрын
@@temporarilyoffline awesome, thank you sir, great videos too
@temporarilyoffline
Жыл бұрын
@@vincentcimino1963 you're welcome
@henriquepoeiramanso6612
2 жыл бұрын
Congratulations! It was difficult but it was through to the end. It takes a lot of patience and persistence. I also had some difficulties, but with your help, following step by step and overcoming your mistakes I managed to get to the end in less time. Thank you so much for sharing, for your video.
@temporarilyoffline
2 жыл бұрын
No problem. Glad you were able to get it to work!
@dennisschultz1175
Жыл бұрын
@@temporarilyofflinedo you have a link for bag?
@temporarilyoffline
Жыл бұрын
@@dennisschultz1175 Here you go: kzitem.info/news/bejne/uoJvz5eujYWYZJw
@MarcoLandgraf
Жыл бұрын
Very annoying to watch it 25 times done wrong. At least put a timestamp where to start watching for the correct version!
@temporarilyoffline
Жыл бұрын
Thanks for the suggestion. Added Chapters!
@MarcoLandgraf
Жыл бұрын
@@temporarilyoffline Didn't expect that really! Thank you very much...very helpful!
@temporarilyoffline
Жыл бұрын
Actionable feedback is always good! @@MarcoLandgraf
@phildurall7466
2 жыл бұрын
Nice rails and preso TO! Who knew that someday "macrame" would be a skill set used in Ham Radio! :) 73 KF6IF
@temporarilyoffline
2 жыл бұрын
Now I can repel down the north face after my SOTA!
@socallars3748
5 ай бұрын
I'm late to the X6100 party, having just picked up a b-stock unit at an absurdly low price. I bought the same rails/handle kit and just installed them both. Damn it, braiding that handle is NOT easy! Despite your guidance, I struggled all the way through it, right to the end! I was almost done, then noticed a botched stick 1/3 of the way in. Of course I had to reverse my work to go back and fix it. I'm loving the rails and handle though, I'm not nearly as worried about dropping this impressive but quirky little radio.
@temporarilyoffline
5 ай бұрын
I think you have the right attitude to enjoy this radio!
@Frisky0563
2 жыл бұрын
I would have gave up I have to hand it you. How do you like that radio? I heard from a friend you want to have built in FT8? I think it's a cool looking radio. 73's
@temporarilyoffline
2 жыл бұрын
I like it, it's a game changer... but the big boys aren't even watching. We already have FT8 running inside! kzitem.info/news/bejne/x7Brm2Wqk3mJZ44 Come join us!
@haramanggapuja
Жыл бұрын
Well, I think you just passed the PQS for boatswains mate 3rd ;-) 73 de W8IJN
@temporarilyoffline
Жыл бұрын
Thanks, I need the pay raise!
@vk4foo
Жыл бұрын
Making a lanyard was Sea Scouts 101. 3 feet in 15 minutes, haha ;) FOO WAS HERE
@temporarilyoffline
Жыл бұрын
Welcome Foo!
@toyotacrawler2594
2 жыл бұрын
How do I turn a transceiver into a ladies' handbag? Without the protective bag as a summer edition... :-)
@temporarilyoffline
2 жыл бұрын
Right - the bikini for the X6100!
@lyledal
2 жыл бұрын
Just picked one up. I was never very craftsy though, so this is gonna be a challenge.
@temporarilyoffline
2 жыл бұрын
Don't worry, I make it look easy!
@thogevoll
Жыл бұрын
Looks like that paracord has too many moving parts for you.😂🤣
@temporarilyoffline
Жыл бұрын
It sure does! But I'm stubborn and won the fight!
@terencedubay
9 ай бұрын
Hi you mention replacing the mic. What mic did you replace it with?
@temporarilyoffline
9 ай бұрын
Here is the replacement mic: kzitem.info/news/bejne/k6Wtn6prfZyUeH4
@OH8STN
2 жыл бұрын
Awesome weaving a d loving the rails. Great video, thanks for sharing. 73 Julian oh8stn
@temporarilyoffline
2 жыл бұрын
I thought it would be fun to leave the "struggle" in and might help some people. Glad you liked it. This is a fun radio to have. Did you see that we've got Linux running on the radio and can do JS8Call with just radio, antenna, keyboard and mouse?
@Dusty_Ham
2 жыл бұрын
Watching this kind of makes me want to get a bunch of paracord just to make handles and things.
@temporarilyoffline
2 жыл бұрын
A leash for your kiwi?
@Dusty_Ham
2 жыл бұрын
@@temporarilyoffline The trick is in trying to catch the Kiwi
@JarlSeamus
Жыл бұрын
That metal cap wasn't a dust cap, it's a shorting cap. It has a center pin. I've been looking at this item for my radio, Thanks for the Review!
@temporarilyoffline
Жыл бұрын
Could be, weird, but could be.
@dennis8019
2 жыл бұрын
would be nice to 3d print them in nylon
@temporarilyoffline
2 жыл бұрын
Check out TOADs, we are working on a 3d print version
@titotrueba3332
2 жыл бұрын
jajajaja really had a laugh trying to follow your instructions, in the end I tied my paracord slightly different, but still and as always (since I discovered your channel) your video was very helpful! thanks
@temporarilyoffline
2 жыл бұрын
No problem. This was fun to do.
@mctscott123
2 жыл бұрын
You mentioned getting a different mic cable, is it not just a standard cat 6 cable? Could pick up a cat6 flat cable for it.
@temporarilyoffline
2 жыл бұрын
Its sitting here waiting for a test/video. I do believe any straight through cable would work. Be on the lookout for a new video.
@owlcricker-k7ulm
2 жыл бұрын
I have the urge to do macrame!
@temporarilyoffline
2 жыл бұрын
I promise I won't interfere.
@KA4UPW
2 жыл бұрын
So, What is the link for the carry case?
@temporarilyoffline
2 жыл бұрын
Here you go: 👉 Compact X6100 Case: amzn.to/3ENxyZr
@KA4UPW
2 жыл бұрын
@@temporarilyoffline Thanks i ordered them !
@temporarilyoffline
2 жыл бұрын
Excellent!
@chopchop3464
7 ай бұрын
use a nice camera strap
@temporarilyoffline
7 ай бұрын
#Protip
@petrus54654
2 жыл бұрын
With cobra weave one strand always stays over, the other always stays under. They cross from side to side but never from top to bottom.
@temporarilyoffline
2 жыл бұрын
Exactly!
@LaurentEgliAdventure
2 жыл бұрын
Got mine! Works like a charm and looks good. Thanks for the tip!
@temporarilyoffline
2 жыл бұрын
I think it's a good addition to the radio
@larrygrigar3793
2 жыл бұрын
I really like it. Looking into doing that with my xiegu x5105
@temporarilyoffline
2 жыл бұрын
That would look great too!
@G7VFY
2 жыл бұрын
What about a proper screen protector? G7VFY
@temporarilyoffline
2 жыл бұрын
Any of the cell phone screen protectors would work, just have to measure and cut. Look for anti-gkare to cut down on the reflection. I'm looking for one and when I find it. I'll post a video. The first layer of the screen is removable. kzitem.info/news/bejne/zIR4toutbWSLZoo
@RaiderDonnie
2 жыл бұрын
Very nice rails! I wish they made them for the X5105. I wonder if these would fit?
@temporarilyoffline
2 жыл бұрын
These rails won't fit on the 5105, but the concept can still be applied. I'm surprised there aren't any available, maybe the flat buttons make people think its not needed?
@RaiderDonnie
2 жыл бұрын
@@temporarilyoffline I too am surprised no one made them for the X5105. I wish I had a 3d printer and some basic knowledge on how to design something like that.
@wild-radio7373
2 жыл бұрын
Team Replay 🥰👍
@temporarilyoffline
2 жыл бұрын
I haven't made a paracord weave in years, not since the girls were little... took me a bit!
@wild-radio7373
2 жыл бұрын
@@temporarilyoffline definitely provoked some strong memories for me as well, having grown up as a hippy of sorts, I got trained in the ways of macrame haha :)
@wild-radio7373
2 жыл бұрын
@@temporarilyoffline have a wonderful day today! April fools day is such a fun day!♡♡♡ stay safe out there luv :)
@temporarilyoffline
2 жыл бұрын
@@wild-radio7373 You too!
@MeineVideokasetten
2 жыл бұрын
*G* *R* *E* *A* *T* idea! Look's cool.
@temporarilyoffline
2 жыл бұрын
Its been a great addition to the rig!
@CapeCodCNC
2 жыл бұрын
Cool hope mine comes in tomorrow!
@temporarilyoffline
2 жыл бұрын
Fingers crossed 🤞
@dalewegener1739
2 жыл бұрын
Nice rails, where can I order some please?
@temporarilyoffline
2 жыл бұрын
Here you go: ebay.us/EbYVv5
@jdschauss
2 жыл бұрын
Forty bucks seems a bit excessive for those. - K5SFC
@temporarilyoffline
2 жыл бұрын
I agree, but that's about the price of all commercially available rails.
@jdschauss
2 жыл бұрын
@@temporarilyoffline True. What's currently on fleabay doesn't even come with anything other than the two rails. The reason I'm going to buy is because you've confirmed for me that they are actual metal and not 3D print brittle junk, so thanks for that. As always, great video.
@temporarilyoffline
2 жыл бұрын
My kit from ebay said it would be rails only and so far 2 of us have received the full kit. If you don't get the paracord, it takes about 104" to get it done.
Пікірлер: 89