Thank you XIMgameplay, I really appreciate learning from your videos. I’ve had the XIM4 for a couple years and just got the Apex tonight but I never really in depth because their was a lot of false information online and thanks for shedding light in all your videos.
@XIMCentral
6 жыл бұрын
Thanks man, ill make sure to upload more tutorial videos for the xim that make it easier to understand all its options! :)
@jasesouls2223
6 жыл бұрын
Went from 12000 to 3200, then 1600. 1600 actually works the best for me, 3200 is also pretty good. Can’t believe I used 12000 for so long.
@XIMCentral
6 жыл бұрын
if your xim sensitivity is below 100 (or 350 with sync off) then you can also go 1600 without any accuracy problems :) nice to hear that the dpi change worked out so well for you!
@MyDokuChannel
5 жыл бұрын
1750-1800 is perfect for me
@josepiedra9581
5 жыл бұрын
@@MyDokuChannel how strong Is the aim assist on cod4 using that DPI?
@dylanwhite25
5 жыл бұрын
How do I change it
@bromeolaw5917
5 жыл бұрын
XIMGameplay low chance of a reply but i want to play with 400, or 1600, and will not accept any other dpi so what should my sense be to use it on default
@teddythodo3302
6 жыл бұрын
12,000 DPI feels the absolute best with synchronization OFF. I just personally can’t feel 4,000 dpi is better. 12k just feels right. Logitech g502.
@nicksweeten2175
6 жыл бұрын
teddy thodo what mouse pad do you have?
@josepiedra9581
6 жыл бұрын
teddy thodo I use a soft cloth pad and 12000dpi works fine to me too! Less aim assist the better!!
@XIMCentral
6 жыл бұрын
then your mousepad works well with the amount of dpi and you most likely prefer the aim assist behaviour with 12000 dpi over lower dpis :) theres nothing wrong with that, keep your settings if you enjoy them! :)
@teddythodo3302
6 жыл бұрын
Nick Sn it’s an Ultra Pro playing mat used for like trading card games like Magic or Yugioh. It’s a little thin, but it’s plenty big. 40” width 24” height. Feels perfect.
@teddythodo3302
6 жыл бұрын
Jose Piedra yea this is the settings that allows for less aim assist feeling. But it also depends on the game and how it handles aim assist. In fortnite in particular the ADS is pretty bad so i just deal with it. But hip it’s virtually none.
@BrothaMarOfficial
4 жыл бұрын
I was using 16k-20k (Lancehead and Basilisk V2) for a while and I noticed there were moments where tracking, recoil management, and snapping to targets were harder to do. I would go too fast and while shooting I would move off target when I did not mean to. Btw I don't use aim assist so those bad movements are mainly from the movements I would have to make to move right. I'll keep you all posted if there is a significant change. Edit: I dropped to 4500 DPI and it has improved my aim tremendously. It feels just right and it doesn't knock my aim off from small movements like with 16k-20k.
@Migu24
4 жыл бұрын
Lol i literally use a cheap 5$ mouse with 800 dpi on the hama speedshot and it works perfect
@adoten4900
5 жыл бұрын
Hi thanks for your tutorials ! I have a 1000hz xim apex playing 12k dpi on R6S (no aim assist) on a hard mouse pad. Would it be better trying 4k dpi ?
@fatemichael7579
5 жыл бұрын
Ado Ten yes
@XIMCentral
5 жыл бұрын
Definitely try it, however you basically have the perfect setup for high dpi so the only difference in your case would be the aim assist behavior. 12000 dpi will reduce the aim assist while 4000 dpi would slightly increase it. Since RB6 doesnt have any aim assist though you should theoretically have the very same accuracy with 12000 dpi than with 4000 dpi. The mouse movement behavior will slightly change though between the two dpi values, 12000 will feel more granular while 4000 will be a little bit snappier. I play RB6 with 3200 dpi for example although my mouse also offers up to 12000 dpi.
@adoten4900
5 жыл бұрын
@@XIMCentral Thank you so much for your response. I really appreciate how you're dedicated to this, even though you're asked the same questions all over again ! Thanks mate. I tried 4k dpi for a few days, tried different sync settings, and eventually did go back to 12k default sync as it felt more playable to me. But as I watched your other videos I did a big discovery : I was playing with a too high sensitivity that I thought was good for my playing style but that actually I couldn't handle. I lowered everything and it's night and day ! For everyone who's struggling finding the good settings : set the dpi the highest depending on your mouse pad type, then lower your sensitivity to the point you'll do a 360° going all the way across the pad (watch the sensitivity tutorial). First give it a shot for a few hours and you'll see !
@XIMCentral
5 жыл бұрын
@@adoten4900 Great to hear that the sensitivity change worked out so well for you! :)
@ignaciodeniz2952
3 жыл бұрын
I play with 4k dpi, 150 hip and 46.5 ads.
@atnott
6 жыл бұрын
Loving these videos. Thanks for your time!
@WSRFANG
6 жыл бұрын
Great video very helpful using 2400dpi now. I think sweet spot is 2000- 6000 low dpi is usually more accurate I recommend everyone to try the default settings of dpi on a mouse much snappier feeling to.
@freeknowledge6961
Жыл бұрын
Bro for real ur channel is the best for xim I learn a lot form u , thx for everything
@XIMCentral
Жыл бұрын
Happy to hear that man! ;)
@猎马人-f2e
6 жыл бұрын
Thanks a lot. Purchased xim apex one month ago, the DPI settings have annoyed me so much !
@vintriloquism7658
4 жыл бұрын
小猫咪瘫痪了 same
@warm1ke304
6 жыл бұрын
Keep it coming please! Also, you skipped synchronization values explaining . Could you please elaborate ? im a little confused for what those settings (slow, default, common, or off) do. I know in theory they are tailored for specific framerates, but I don´t really understand them, please elaborate
@XIMCentral
6 жыл бұрын
i will make a video on synchronization :) common = for 60fps games, eg CoD of BF slow = for 30fps games, eg Destiny default = the original xim4 feeling off = the xim sends the inputs as fast as possible, this doesnt necessarily give the best results. i would recommend you to use common or default.
@campos3452
6 жыл бұрын
Woah, I hear what your saying. Excellent info. It helped me understand a question I had in mind. Excellent work. No wonder FragFx shark controller is 2000 DPI I was right!
@kuxioahuh9515
2 жыл бұрын
Hey, so I'm on XIM4, I want to look more controller like, what dpi would give an analog stick look? I've tried 3200 but it's kinda jittery
@XIMCentral
2 жыл бұрын
Hey, steady aim and a config setup like the MJFame one (tutorial video on this channel) will let your mouse movements become closer to those of a controller player.
@36lunited
6 жыл бұрын
Can you please make a tutorial for aim and dpi sensitivity for Rainbow six siege?
@denizyeniceli6518
5 жыл бұрын
U guys are so bad enough to use MnK fucking losers
@alihayder9
5 жыл бұрын
Deniz YENİCELİ says the one who’s watching this video
@nicksweeten2175
6 жыл бұрын
Great video! I would like to learn more about the smoothing and synchronization features if you have a chance.
@XIMCentral
6 жыл бұрын
thats on the list for the next tutorial videos! :)
@El_Twin
6 жыл бұрын
Awesome I'll be going back to 4k dpi and it's actually what i used to have on the xim4. I bought the xim apex and i configured on the 12k not realizing this info.
@xzraey3447
3 жыл бұрын
Where do i actually change it on the app
@raymrivera
6 жыл бұрын
This helped so much. Great job.
@XIMCentral
6 жыл бұрын
Great to hear that you liked it! :)
@tombellamy3682
6 жыл бұрын
Does it matter if you vary your dpi between 3000 and 4000. For example will it make a difference if I put it at 3200 dpi instead of 4000 dpi
@XIMCentral
6 жыл бұрын
It will not change the quality of your mouse movements but the amount of aim assist you have, less dpi means more aim assist while more dpi reduces it. For more about this check out the increase/decrease aim assist tutorial on this channel.
@JuneBug448
6 жыл бұрын
I have a Steel Series Qck+ mouse pad and my mouse is a Logitech G Pro (Wired Edition) so you would recommend going from 1000hz to 500hz on polling rate? Im a very slow sens player btw. Currently on 10,000 dpi
@XIMCentral
6 жыл бұрын
Hey, as seen in this video you should first drop your dpi to 3000-4000 dpi as cloth pads such as the qck+ dont work very well with more dpi. As for your polling rate there is a test that you can do to find out if the mouse runs better on 1000hz or 500hz, here you can find the test: kzitem.info/news/bejne/tIaN3aR4cpx3lGU
@marcos948
6 жыл бұрын
I lowered the dpi from 10000 to 4000 on my g502 and holy f. It’s feels so much smoother and precise now. It feels as it reacts smoother and more accurate if that makes sense.
@XIMCentral
6 жыл бұрын
That makes perfect sense because thats exactly what you would expect from lowering your dpi, especially if you play on a cloth mousepad! :)
@simon7142
6 жыл бұрын
Great video keep them coming. I have a xin4 and also play on PC. Can I convert my turn 360 distance from PC to XIM4 using the calculator mentioned.
@XIMCentral
6 жыл бұрын
no this is not possible, but you can do something else. get a ruler and measure the distance you need to make a full 360° turn in your PC game. then launch your xim and adjust your xim sensitivity so you also do a 360° turn with the same distance :) i recommend to move the mouse very slowly so the result is accurate.
@lajoya9002
6 жыл бұрын
I have a question do i need to have my controller always on? Or can i turn it off
@lorenz3254
6 жыл бұрын
Visca Barca just always keep it on to be safe
@XIMCentral
6 жыл бұрын
The controller has to be always on and connected to the xim if you want to use it. when you stop playing you can of course turn the controller off (and the XIM too).
@J-C8573
6 жыл бұрын
I have a problem. Every time I connect my controller to the xim it turns off (the mouse and keyboard still work though) and if I turn it back on the mouse and keyboard stop working. This leads to the problem that I can’t use my headset on the controller. Help!
@noblesix4351
5 жыл бұрын
Christian Pélissier I’d recommend a Mixamp that plugs into your console directly like the Mixamp Pro by Astro
@piambs
5 жыл бұрын
I have a Razer DeathAdder Elite with a Razer Sphex mousepad mini. What would be a good DPI to use and XIM sensitivity to use since it is not a cloth mousepad? Also, what is smoothing and X/Y ratio?
@XIMCentral
5 жыл бұрын
Hey, go with 3000-4000 dpi as that usually gives the best aim assist behavior. XY Ratio changes the sensitivity of your axes, you can make the X axis more sensitive than the Y axis or the other way round. Smoothing is explained here: kzitem.info/news/bejne/lZiurmSZsYOYZ34
@MikeyM838
6 жыл бұрын
Should I buy one of these off of Amazon?
@Dkryptd
3 жыл бұрын
Do you know how to get rid of delay?
@SupJayy
3 жыл бұрын
@@Dkryptd increase you're mouse HZ / REPORT RATE. 500hz is 2 ms delay 1000hz is 1 ms delay
@Dkryptd
3 жыл бұрын
@@SupJayy I already play on 1000 polling rate. Does out of date mouse translation contribute to delay?
@SupJayy
3 жыл бұрын
@@Dkryptd yes branded mouse which are new work best.
@Dkryptd
3 жыл бұрын
@@SupJayy I use the logitech g502 Hero and every time I want to change my config it displays a big message that says to remake my config in order to update to the latest. If I remake my config would it get rid of the delay?
@AndroidTech4us
5 жыл бұрын
Excuse me just have question, when you usd dpi calculator you put the current dpi and new dpi... the current sensitivity? You mean sensitivity in xim for hip fire or for ads or what?
@XIMCentral
5 жыл бұрын
Yes its the new xim sensitivity for hip or ads after you changed your mouse dpi :). That way you keep the same sensitivity.
@theinvisibleboy2973
6 жыл бұрын
How about this setting: Xim sensitivity : 190 mouse DPI: 800 In game sensitivity: maximum Aim assist: on I use Logitech G pro Is it ok?
@XIMCentral
6 жыл бұрын
Hey, those are really sub-optimal settings. Your xim is not a pc and requires a lot of dpi, 3000 dpi is the minimum you want to use to avoid micro-stutter. Increase your dpi and reduce your xim sensitivity, then its a really good config setup.
@JohnDoe-og2ri
4 жыл бұрын
XIMGameplay what setting would you reclined to get something that feels like 400 dpi
@taylorboe5516
4 жыл бұрын
Fun Games you’d need more information to figure that out. Are you talking about 400dpi when you use it on a pc? In a certain game? What’s the in game sensitivity you’re comparing it to?
@Jimbo-ne3lo
3 жыл бұрын
@Xim Central I I have a question? can I hook up my mouse and keyboard with the same values of the DPI instead and use my controller and still get the benefits from the mouse and keyboard
@XIMCentral
3 жыл бұрын
Hey, what do you mean exactly?
@Aethelnair
6 жыл бұрын
I feel insanely accurate with 800 Dpi and 500 hz with my G502, do I really need 3000 and up?
@XIMCentral
6 жыл бұрын
800 dpi will cause quite a strong mouse stutter that overall reduces your micro movement precision quite a lot. so yes you should try more dpi and see how that works out for you.
@Aethelnair
6 жыл бұрын
XIMGameplay Appreciate the quick reply
@danvar6172
6 жыл бұрын
I think I know that you use a Zowie Mouse (EC2-A). What polling rate do you use in your zowie mouse and XIM apex?
@عليكريمحسن-د3ظ
5 жыл бұрын
Ihave logthic g502
@lxzqs5529
4 жыл бұрын
What ur best settings for it?
@mymasonjourney
6 жыл бұрын
What sync settings do you prefer for rainbow 6 😊?
@XIMCentral
6 жыл бұрын
sync common and default will give the best results, will do a video on this soon that explains the different sync settings in more detail
@FunkyKidData
6 жыл бұрын
Can you do a video to what Hz is best?
@XIMCentral
6 жыл бұрын
sure, thats actually a good idea. will work on a "how to increase and decrease aim assist" video first, then might tackle your suggestion!
@FunkyKidData
6 жыл бұрын
XIMGameplay Thank you! :D Any idea of when the video you're making is going to be uploaded?
@XIMCentral
6 жыл бұрын
on friday i wanted to upload a fortnite video, the aim assist video should be out this this sunday if i get it done in time. until the polling/hz tutorial video is out here you have a short guide: 1) plug your mouse to the pc set your mouse to 1000hz 2) run this website: zowie.benq.com/en-eu/support/mouse-rate-checker.html 3) now click into the website so it tells you your current mouse polling/hz 4) move the mouse very very fast in circles and check the polling/hz counter 5) if your mouse can perform steady 1000hz then the xim apex 1000hz mode is the best polling rate for you 6) if your mouse drops to eg 990hz sometimes (or lower) then do the following: 6a) keep your mouse at 1000hz and set your xim apex to 500hz with 0 smoothing 6b) keep both, your mouse and your xim at 1000hz and add a smoothing of 3-7 to reduce the mouse jitter in these two cases, personally i would recommend to go with 6a) as it gives the better "pure" aim for better pc accuracy, 6b) will give you more aim assist if you prefer that (which is also fine tbh)
@FunkyKidData
6 жыл бұрын
XIMGameplay Thank you very much, I will try that.
@FunkyKidData
6 жыл бұрын
My mouse got up to 1000hz, but I had to struggle hard to get it up to 1000hz, it dropped to 990-999 Hz the majority of the time.
@demonx7735
2 жыл бұрын
the best dpi is between 3000 and 4000. which would give more aim assist, value near 3000 or a value near 4000?
@XIMCentral
2 жыл бұрын
Less DPI results in more aim assist, so 3000.
@dazu681
6 жыл бұрын
Please not have this voice, it really annoys me
@8.581
6 жыл бұрын
Dazu you’re irrelevant
@dazu681
6 жыл бұрын
PC Skeng okay?
@therealjackfisher
6 жыл бұрын
I wonder how you sound XD... He have very calm voice..
@dang5530
6 жыл бұрын
then gtfo dumbass
@dazu681
6 жыл бұрын
dont care they asked do you like this voice😂 I'm just telling them no I dislike it.
@budbreath8165
5 жыл бұрын
is the higher than 4000 dpi still relevant with the new steady aim feature and so on? or is something like 6000 dpi better with the new steady aim and other new features to help break in and out of the aim assist. ? another question. in the end, lower dpi works better with aim assist right?
@XIMCentral
5 жыл бұрын
Yes lower dpi works better with the aim assist which is why 3000-4000 dpi is still ideal, even with the new xim settings such as steady aim :).
@aldocabrera9603
5 жыл бұрын
You repited the same stuff like 20 times
@ClassicKrusty
5 жыл бұрын
I just got the G502 Hero. Should I max out my DPI to 16,000 or stick with 12,000?
@XIMCentral
5 жыл бұрын
Depending on what mousepad you have stick to either 3000-4000 dpi or max dpi (see video).
@simonelotti3449
5 жыл бұрын
Hi i use g502 with 12k dpi but i dont have a good aim, do u think that i must change dpi to 3200 or? I play on r6. Please help me
@XIMCentral
5 жыл бұрын
Yes definitely try that. Its worth it to try 500hz for your xim and mouse too. Also check if your config is identical to mine, maybe you havent fully optimized your RB6 config for the best aim accuracy: kzitem.info/news/bejne/0XmDtaegmopmfZw
@simonelotti3449
5 жыл бұрын
@@XIMCentral i dont understand, its Better 1000 or 500 hz?
@XIMCentral
5 жыл бұрын
@@simonelotti3449 For a lot of mice 500hz is better than 1000hz. See here the reason why: kzitem.info/news/bejne/tIaN3aR4cpx3lGU
@unbeatabie7408
2 жыл бұрын
Moin, klasse Video! Hab mal ne kurze Frage, ich versuche die ganze Zeit meine Dpi mit der Logitech Maus einzustellen, das Problem kommt jz. Jedes mal wenn ich auf mein Laptop Dpi umstelle und dann wieder die Maus an der Xim anschließe ist das jedes mal ne andere Sensibilität, ich weiss ist ein bisschen viel, aber brauche dringend Hilfe
@XIMCentral
2 жыл бұрын
Hey, aktiviere im Logitech Treiber die Onboard Memory Funktion. Dadurch werden deine DPI Einstellungen auf den internen Speicher platziert und die Maus hat immer die selbe DPI Zahl wenn du sie mit dem XIM verbindest :).
@عبداللهمنيرمحمدهادي
4 жыл бұрын
Hiiii Mouse has the highest value is 3200 dpi, so do I use the highest or reduce it to 2400 the first lowest??????
@XIMCentral
4 жыл бұрын
Hey, if the highest mouse dpi profile is 3200 then definitely use that. 3200 dpi gives excellent results with the xim, so i would highly recommend you to use 3200 instead of 2400 dpi :).
@Warpgate8
7 ай бұрын
Yo xim im trying to get the deathadder v2 pro can i use it wireless with my apex? Also do i need to change any of my settings here to use it wireless? Hip: 110/Ads :57 / Off sync / No curve / 5 smoothing (both hip and ads) / 6400 dpi / 20 aimassist window size (25 for solider) 60 aimassist ease in / Exponential ramp / 1000hz / 100 scope in game / PS4 OW1 profile (1.3)
@Warpgate8
7 ай бұрын
Plus, also, I'm scared of 6,400 dpi. After I just watched this video, do I need to fix my settings for ps4 settings? Also so one who is using xbox one overwatch 1 (1.3) can I use (1.3) on ps4?
@Warpgate8
7 ай бұрын
Also were is the xim apex manager?
@XIMCentral
7 ай бұрын
Hey, just connect the wireless USB receiver of the mouse to the XIM and it will work! :) And you must not change your settings, you can keep those when using the mouse wireless! What do you mean with the XIM Manager?
@Warpgate8
7 ай бұрын
@XIMCentral oh nothing just if my settings were fine to use on the ps4?
@XIMCentral
7 ай бұрын
@@Warpgate8 Yes those look fine! 💪
@ronin7590
2 жыл бұрын
I have the Logitech G700s. Its maximum is 8000 Dpi and I was using that value with XIM Apex but I think there is some over acceleration. So 4000Dpi is the sweetspot yes?
@XIMCentral
2 жыл бұрын
For most games and mice yes! :)
@EriksWorld14
6 жыл бұрын
So what DPI would you recommend then? Start maybe at 4k and go from there - lowering it in increments?
@XIMCentral
6 жыл бұрын
If you try both, 3000 dpi and then 4000 dpi you will see that the mouse performance is identical, the only thing that will change is the aim assist behaviour. 3000 dpi will have more than 4000 dpi. So id just try both and stick with the one you like more, if you prefer a mixture between the two aim assist behaviours then go with 3500. So overall test 3000, 3500 and 4000. Testing more doesnt make that much sense anymore :).
@EriksWorld14
6 жыл бұрын
I see. A little background: - Mouse: Logitech G603 (w/ new hero sensor) - Mousepad: Corsair MM300 - Keyboard: Corsair Wireless K63 - 500Hz polling rate (both mouse and xim) --> per your recommendations and tests - Firmware: 20180501 **[Beta] - Software: 20180528 **[Beta] - Console: Xbox one I did a lot of experimenting recently switching back in forth between 4K DPI (12 Xim Sens) and 12K DPI (4 Xim sens). I switched between the two profiles (and corresponding Xim profiles) periodically with just a click from my mouse and keyboard hotkey. I used overwatch for my crude tests. (12K DPI & 4 Xim Sens) --> I found that the 12K DPI felt more 'natural' --> More responsive and connected in comparison to 4K This is what I am used to so I am a little fond of it. (4K DPI & 12 Xim Sens) --> felt more "soft" ; as if there was a dampening effect on some of my movements such that it made them feel less responsive but more 'fluid' (ie less jerky) --> not as connected as 12K --> definitely different feeling; --> I did not notice any improvement on aim assist. to be fair, i've never really had a problem with aim assist sticking I am conflicted with whether to stick to 4K DPI, and I am wondering if my experiences are normal/expected or if there is possibly something else occurring that is causing me to dislike 4K DPI. The decision to go back to 12K DPI would be a lot easier if your argument for a lower DPI wasn't so compelling. (e.g. the fact that 12K DPI works best with nearly perfect surfaces and is easily distorted by detritus). I WANT to like 4K DPI and am hoping that there is something wrong with my setup that is causing me to prefer a higher DPI. Sorry for the rant, I thoroughly enjoy your videos and your production quality is awesome!
@XIMCentral
6 жыл бұрын
Hey, your experience is exactly what you should have found out by testing, due to the higher scanning resolution of 12k dpi the mouse movements will feel slightly more direct. This comes from the micro-jitter that your cloth surface is causing, a minor mouse moevment will result the sensor in registering in several mouse inputs while with low dpi it will just scan one movement. If you move your mouse very slowly, say you want to make pixel-perfect micro adjustments you might notice the micro-jitter. The intensity of the jitter will overall depend on the quality of the cloth pad, if the surface is very flat with small fibres then you will notice less jitter than on a surface with a lower density of larger fibres. Now about the question what you should go with, id recommend you to stick with what feels better for you. Right now it sounds like your muscle memory got used to 12k dpi, so id stick with that for now. If you ever take a break from this specific game, OR you start a new one, then this is a good time to re-evaluate 3000 dpi as your brain will then experience an "undistorted" comparison between 12k and 3k dpi (since you are not used to the mouse behaviour in this game with either of the two).
@EriksWorld14
6 жыл бұрын
Thank you for that lengthy and comprehensive reply! You are absolutely right about why it feels like 12K seems more direct, but considering I've only had the Xim for less than a month, I think it would benefit me to go ahead and make the transition over to 4K DPI as my mouse movements aren't refined and they shouldn't take precedent over the long term experience with my Xim. As always, you are a source of enlightenment and I am happy to have found your page. Thank you again! (:
@XIMCentral
6 жыл бұрын
No problem man, always a pleasure to help out Ximmers to increase their gaming experience! :)
@AzuraSnipingHD
6 жыл бұрын
I play on 7200 DPI. What should I put my Synchronize on? Idk what it does. Does it have to do with aim assist? Like what is Off, Default, Common, Slow? Btw, just came back trying 3000-4000 DPI. I have a 1000hz polling rate on my mouse and with the 3000-4000 DPI, it’s more jittery than the 7200 DPI and UP. Does this jitter with the 3000-4000 DPI with 1000hz polling rate have to do with Synchronize?
@XIMCentral
6 жыл бұрын
all three can cause jitter, so you need to find the optimal settings for these. 3000-4000 is optimal for dpi, for polling i did a specific tutorial video that will allow you to find the best polling (its different for every mouse so i cannot say what works best for you), for synchronize you should use either default or common.
@UncleRuckusMovie
3 жыл бұрын
Is the Redragon M801 a good mouse for the Xim? Max dpi on the mouse is 16,400 btw.
@XIMCentral
3 жыл бұрын
Hey, i dont know a lot about the mouse but if it has onboard memory and a good sensor then it should be a good pick!
@welshmonsterhunter7028
5 жыл бұрын
Most people on KZitem recommend max dpi like 12000 to 16000.Are they wrong or is it personal preference.i have to set my mouse up on a friend's computer before I take it home to use so would be handy to know
@XIMCentral
5 жыл бұрын
They re actually wrong, from a mathematical point of view theres no gain in going above 3000-4000 dpi. So you can expcet the same tracking precision with 3000 dpi than with 16000. However a lot of mousepads arent made for 16000 dpi so its usually best to run 3000-4000 for a better tracking on the mousepad.
@leawdash5536
2 жыл бұрын
Hey with the new XIM firmware, you can go up to 500 sensitivity, when do you start getting upscaling? I'd like to know how much I can lower my DPI without getting any upscaling, is it still 100 even tho maximum is 500?
@XIMCentral
2 жыл бұрын
Hey, the XIM Apex uses the same upscaling as XIM4 but offers different syncrhonization options to circumvent the upscaling issue. It also offers different polling rates which further help with that.
@leawdash5536
2 жыл бұрын
@@XIMCentral Thank you!
@SlayWoe
5 жыл бұрын
I play cod with a hardtop mousepad. What dpi do you think is better to use for me? And i also have a logitech g502
@XIMCentral
5 жыл бұрын
With such a mousepad you can go with any dpi value that is higher than 3000. A value of 12000 will reduce the aim assist slightly while lower values close to 3000 will boost the aim assist. Your mouse accuracy will be identical with both dpi values on such a mousepad.
@SlayWoe
5 жыл бұрын
And i have a question on ballistic curve. Will it do anything to my aim assist?
@XIMCentral
5 жыл бұрын
Yes it definitely will. Here you can learn more about the effect of the ballistic curve on the aim assist: kzitem.info/news/bejne/0G2v3HZqmmKKiYo
@averageredyt7268
6 жыл бұрын
16,000 DPI. I play with aim assist off (due to the sheer annoyance) and that feels amazing for me. But am going to try the new information you've provided, Thanks. Just wish consoles or game manufacturers would integrate FOV adjustment. > a new XIM user.
@XIMCentral
6 жыл бұрын
let me know how it works out for you. a few selected games such as BF1 and Warframe offer a FoV slider, most games dont though as it will have a negative effect on the game performance/fps
@caramelcrazy9897
Жыл бұрын
Hey what DPI will start to give a more analog stick look?
@XIMCentral
Жыл бұрын
Less DPI will do that, try 800-1600 DPI. Dont expect an incredibly big difference though, a well trained eye will still spot the difference between a stick and a mouse. Its more about the way you aim with your mouse than the settings you use.
@Anarchy
4 жыл бұрын
Im using 12000 and 10000 dpi right now, should i turn it down to 3000 to 4000 dpi then?
@XIMCentral
4 жыл бұрын
Only if you use a clothpad, if you dont then you can keep it as it is. 12.000 dpi will slightly reduce the aim assist too btw.
@worthybeast3598
6 жыл бұрын
Very late comment but I've use the xim3 for so long usually playing mw3. Sometimes, controller users gets better aim then me. Should I upgrade to Xim Apex for better, smooth , accurte aim? Also, what settings on mouse and Xim should I use for best PC like experience?
@XIMCentral
6 жыл бұрын
The difference between a xim apex and a xim3 is quite noticeable, its more precise, only 1 millisecond delay and offers much more adjustment knobs. However this will not necessarily improve your aim by a large margin, one thing that most likely increases your accuracy a lot more is to find your personal best mouse sensitivity that works best for your dexterity. Most people tend to play with sensitivities that are too fast or too slow, see this tutorial on how to find your own best sensitivity with a xim. (can be done 1:1 with a xim3 too). Link: kzitem.info/news/bejne/06lm2Xxqq5h4hZg
@worthybeast3598
6 жыл бұрын
Thanks for replying . One more question. I watched your video on how to increase/decrease aim assist. Aim assist really help me out with accuracy. You said all these things increases it: 3-7 smoothing- 3k-4k dpi, common sync, 125-250 hz, and and an aim assist ballistic curve. With all these combined, how strong will the aim assist be?
@XIMCentral
6 жыл бұрын
Only add the curve at the curve at the very end if the aim assist isnt strong enough yet, the reason is that the curve changes your mouse behaviour much more than any other setting and therefore will also decrease your overall accuracy (in return you have more aim assist). So definitely go like 250hz, sync common, smoothing 3-7 and 3000-4000 dpi first. If your mouse movements are too mushy then remove a bit of the smoothing or go with 500hz instead :).
@worthybeast3598
6 жыл бұрын
Ok. Do you know the best aim assist settings for xim3? I appreciate the help
@XIMCentral
6 жыл бұрын
The formular is the very same, the difference though is that xim3 is locked to 125hz and you cannot change the sync. So overall similar but less knobs to increase the aim assist, most notably the dpi, smoothing, ballistic curve and analogstick movement. The xim3 has two other things though: With boost you can reduce the aim assist, with acceleration you can slightly increase the aim assist without the need of a ballistic curve.
@ericgarcia788
10 ай бұрын
Do you recommend 3000-4000 dpi for the XIM MATRIX too?
@XIMCentral
10 ай бұрын
For Matrix more DPI is better. The sweet-spot appears to be 8000-12000 DPI.
@ericgarcia788
10 ай бұрын
@@XIMCentral Now I see why it's set to 10000 dpi by default. Thank you very much!
@FPSUNO
6 жыл бұрын
Does smoothing mess up accuracy at all or just lessen jitter
@XIMCentral
6 жыл бұрын
if you go above 10-15 smoothing it will start to reduce your accuracy, its best to stay in a range of 0-10 :) if this range doesnt reduce your mouse jitter completely then you should consider to either play with 500hz instead of 1000hz, or use the xim sync feature common.
@Wraiku1
6 жыл бұрын
Hi i play fortnite with 400 dpi and 0.14 mouse sens is this going studder alot? Im very comfortable with this sens
@XIMCentral
6 жыл бұрын
Are those your PC or XIM Settings?
@jpnmasochist
6 жыл бұрын
If you want the best setup your going to have to calibrate the settings based off each piece of hardware per game. Screen resolution to dpi to fps, polling rate to USB port refresh rate, and ideal dpi settings for the mouse vs mouse pad/surface. Then finally in game settings vs xim sensitivity vs ballistic curve to acquire a comfortable high precision setup. Take your time and tune one thing at a time. My trick is to max a setting out, test aim to see its effects, then reduce it to usable settings to learn what each setting does to your input. There is no cut and paste setting that covers everyone's equipment variety. So learning what works and doesn't is up to each user. The xim requires attention in settings and in return will grant you fantastic aim.
@XIMCentral
6 жыл бұрын
Yes that would be ideal, that way you have a config setup that is fully meets your needs the best.
@jaallen2131
Жыл бұрын
Is 6k dpi good to use on G502 hero and cloth pad?
@XIMCentral
Жыл бұрын
Yeah thats a good value!
@moreplazma8072
4 жыл бұрын
If I play 120 HIP and 40 ADS with 3600 DPI should I use the dpi calculator and put my dpi up or down ? I use a cloth mousepad.
@XIMCentral
4 жыл бұрын
Are you using sync off? With any other sync your sensitivity would be extremly high. If you dont use sync off then check if your mouse really runs on 3600 dpi (check if you ticked the onboard memory box so your mouse changes carry over to the xim).
@moreplazma8072
4 жыл бұрын
XIMGameplay nah I use sync default
@moreplazma8072
4 жыл бұрын
XIMGameplay I definitely am on 3600 dpi
@XIMCentral
4 жыл бұрын
@@moreplazma8072 Then check your xim sync, your overall ingame sensitivity is not only affected by your dpi but also sync and polling rate.
@moreplazma8072
4 жыл бұрын
XIMGameplay I use 500 hz and default
@biggunsone
6 жыл бұрын
I play on hard mouse pad ( g440 ) with g502, should I poll at 1000 or 500 and which dpi would be optimal 3200/12k. Also if I’m playing on a game that has 30fps, what sync should I put it on...?
@XIMCentral
6 жыл бұрын
If you have a hardpad then you can go max dpi, the only difference then will be that 3000 dpi will give more aim assist compared to 12000 dpi. As for the 30fps, sync slow is what you want to try as its made for 30fps games. Common is for 60fps but can result in a better mouse performance, so try that too. As for your polling rate, this changes between every mouse so you have to try if your specific one can run 1000hz or not. Here you have my polling rate tutorial that shows you 3 methods on how you can test if your mouse runs better with 1000hz or 500hz: kzitem.info/news/bejne/tIaN3aR4cpx3lGU
@biggunsone
6 жыл бұрын
XIMGameplay can I poll at 500 and xim at 500 with dpi at 12k with no problems .?
@XIMCentral
6 жыл бұрын
Yes that should be fine, check out my Best Mouse and XIM Polling Rate Tutorial Video if you want to test how well your mouse runs 1000hz or 500hz :).
@Forgoten214
6 жыл бұрын
I'm thinking of getting a xim for my xbox i don't own one yet. When I play on pc i use 400 dpi and a razer dethadder elite. If I get a xim, what would you recommend i do and what mouse should I get to compensate for that?
@XIMCentral
6 жыл бұрын
most razer mice cannot maintain their dpi with a XIM because they have no onboard memory. so i would recommend you to get a second mouse for your xim. that way you can keep the razer for the pc and your new mouse for the xim. the best mice for xim are right now the logitech g203, g303, g403, g502, g603, g703, g903 and gpro, go with the model that you like the most. for the dpi you should use 3000-4000 :)
@Forgoten214
6 жыл бұрын
XIMGameplay ah nice I've been thinking of the g502 actually would it be hard to match my sensitivity from pc to console? Also does the xim apex work with gta 5? Oh and can i use the same settings for both xbox and ps4?
@XIMCentral
6 жыл бұрын
hey, here your answers 1) if you want the same mouse speed as on PC i recommend you to take a ruler and measure the distance you need to move your mouse slowly on your mousepad to make a 360° turn in your game. then launch your console game and adjust your xim mouse sensitivity so you also do a 360° turn with the same movement distance. 2) yes gta5 is supported by xim but the game has a really really poor aim mechanic, the xim cannot do anything against that. its still playable but dont expect a perfect PC experience like with CoD, BF and so on 3) yes you can use the same settings for both xbox and ps4, however use different xim configs for each console :) (you can still use the same settings in each config and they will play the same)
@brubru5900
6 жыл бұрын
I use a death adder with maxed dpi, Works fine for me. My friend also uses a death adder and has for years on a xim4 with no complainants. So you can easily use the mouse you have.
@XIMCentral
6 жыл бұрын
it depends on the deathadder model you have, the older models dont have onboard memory and will therefore run on 1600 dpi by default, which is not enough for the xim. the newer models have 6400 maximum dpi and the latest ones even more if i recall correctly. those also have onboard memory but must be configured via the synapse driver to run on a higher dpi profile :)
@qbop8931
4 жыл бұрын
I have a Reddragon m601-3 centrophorus - 3200 dpi, but I can't figure out how to change the dpi. Ive downloaded the Reddragon software to my mac numerous times and can't open the files because I need an application to run them off of. Not sure what to do
@XIMCentral
4 жыл бұрын
Im not familiar with that software or its DPI adjustments, maybe redragon has a customer support or a forum which may be helpful? You can also try to ask in the XIM forum, redragon is quite popular among Ximmers so maybe someone already ran into the same issue as you.
@alissondalanon7880
6 жыл бұрын
Thanx for advice. I have one question, my cheap gaming mouse... i don’t know how to chnge the dpi settings. It’s a cobaltwing gaming mouse from amazon.
@XIMCentral
6 жыл бұрын
i would try to google how to to it, there are usually two ways: 1) the mouse has dpi buttons with which you can change the dpi 2) you can configure the dpi via the mouse driver that the mouse uses, in this case the mouse needs onboard memory so that the changes can be saved on the mouse and therefore carry over to the xim
@alissondalanon7880
6 жыл бұрын
XIMGameplay thank you so much again... Hope to hear new advices from you.
@XIMCentral
6 жыл бұрын
if you cannot find a way to change your mouse dpi, and your xim sensitivity is much higher than 100 with noticeable stutter, then how about you maybe consider a mouse like the g203. its one of the cheapest logitech mice but offers extremly good value for the money. it has onboard memory, 12000 dpi max and can be configured via the logitech gaming driver.
@alissondalanon7880
6 жыл бұрын
Thanx again.
@mighty0ne_zz617
3 жыл бұрын
What is better for the xim logutech g402 or g502?
@XIMCentral
3 жыл бұрын
Both are equally good, it all comes down to what weight, button layout and shape you prefer.
@Leazy
6 жыл бұрын
Bei den polling test den du hier irgendwo in den Kommentaren erwähnt hast komme ich mit meiner g502 nur auf 800 - 900. Das ist schon extrem... Kann ich das irgendwie beeinflussen?
@XIMCentral
6 жыл бұрын
nein das liegt u.a. an der verbauten CPU deiner maus, die kann nicht die geforderte Leistung für 1000hz erbringen. das ist relativ normal und findest du bei fast allen namhaften mausherstellern. der preis einer maus würde deutlich ansteigen wenn nur makellose CPUs verbaut werden. sollte deine maus keine konstanten 1000hz liefern können dann stell sie auf 500hz (und das xim auch), die meisten PC profis spielen übrigens aus genau dem grund auch auf 500hz.
@defult-4830
4 жыл бұрын
how much dpi should i use to break some of the aiming assistance? my current dpi is 3200
@defult-4830
4 жыл бұрын
would be in the game batllefild 4
@XIMCentral
4 жыл бұрын
Try 12.000 dpi or alternatively add some boost (200-300 boost).
@fahad3438
5 жыл бұрын
XIMGameplay I have a question. Once I Calculate my DPI and Sensitivity in the calculator, at the end of calculating for the new sensitivity it is recommended that the final result should be between 0 to 100
@XIMCentral
5 жыл бұрын
Hey, if you use a XIM4 then yes you should make sure that your final xim sensitivity is below 100. The reason is that this will prevent mouse stutter. With a XIM Apex this isnt so important anymore though, its mainly for the XIM4.
@fahad3438
5 жыл бұрын
if i want to feel the aim assist which dpi should i go with. Im playing with 3k but still having a problem with killing enemies
@XIMCentral
5 жыл бұрын
@@fahad3438 Then you can use the other aim assist increasement steps that i showed in my aim assist tutorial. Overall though the aim assist will not do the aiming for you, it will only assist you. Therefore make sure that your general mouse aim accuracy is good. A lot of people use sensitivities that are way too high for them and therefore they do not have a good aim. The aim assist will slightly help then, but you may still not properly aim on the enemies. Therefore i would also recommend you to do my perfect sensitivity tutorial.
@fahad3438
5 жыл бұрын
XIMGameplay bro now my aim is much better than before .. I just want to say thank u man. I really appreciate your help .. once again THANK YOU 🙂
@XIMCentral
5 жыл бұрын
@@fahad3438 Nice to hear man! :)
@quantoblixky743
Жыл бұрын
So basically what I’m hearing is 3200 is the best is that true? ik everyone has a preference but in general
@XIMCentral
Жыл бұрын
Yes thats like the best balance between good mouse movements, low sensor latency and aim assist.
@quantoblixky743
Жыл бұрын
@@XIMCentral awesome thanks for always responding to me your a life savor have a good day man!
@ddpunkk
6 жыл бұрын
Are you required to have a computer to change your mouse dpi?
@XIMCentral
6 жыл бұрын
It depends on the mouse, for some mice you dont need a pc (eg zowie mice) while for other mice you will (eg logitech). I would recommend you to google your mouse model and how you can adjust its dpi :).
@khalidibrahim2000
3 жыл бұрын
is it okay to use 800 dpi without using mjfame config i use 800 because i like more aim assist or should i put the dpi 3200 ?
@khalidibrahim2000
3 жыл бұрын
800 dpi hip 90 ads 32 is that okay ? or 3200 dpi better ?
@XIMCentral
3 жыл бұрын
If you want more aim assist then sure, but i would still use the MJFame config then as it boosts the aim assist even more! :)
@laalca
4 жыл бұрын
what mouseped do you recommend to use 3000-4000 to avoid jitter?
@XIMCentral
4 жыл бұрын
Any quality mousepad will do but if you want a really good one then get one of these archive.org/search.php?query=http%3A%2F%2Fwww.rocketjumpninja.com%2Fmouse-pad-reviews%2F
@seyfozzz
4 жыл бұрын
@@XIMCentral ????
@XIMCentral
4 жыл бұрын
@@seyfozzz ?
@ilscreamil9478
4 жыл бұрын
@XIMGameplay what about zowie on xim4 ? Is he a good mouse on xim4 ? Pls need answer ❤
@XIMCentral
4 жыл бұрын
Yes it is, i also have a Zowie (an EC1-A). Use it in 3200 dpi mode for the best results! :)
@franzpanganiban1425
6 жыл бұрын
can you make a video regarding the best call of duty " in game" sensitivity or both game aim assist should be on or off. to apply with the dpi,pooling rate and aim assist.
@XIMCentral
6 жыл бұрын
so a full CoD game config? i will probably do a Fortnite config tutorial first, i can add CoD to the list.
@franzpanganiban1425
6 жыл бұрын
XIMGameplay thanks. like wwii
@danvar6172
6 жыл бұрын
I use a Mouse with 3200dpi . HIP 38 ADS 29 I use Default sync. But I want to try common sync. what would be my configuration for common synchronization?
@XIMCentral
6 жыл бұрын
There is no fixed conversion table as it depends on the game and its framerate. The easiest way to to do a slow 360° turn in the game while measuring the distance you need on the mousepad to do this (with a ruler). Then switch to common and adjust your xim sensitivity so you do the 360° turn with the same mousepad distance.
@ThiagoOliveira-yh1no
2 жыл бұрын
Ola, se vc puder me ajudar eu agradeço. Jogo warzone com 3200 de dpi com a sincronização padrão e sinto que tá pulando pixel. Qual sensi pra começar no hip ??
@XIMCentral
2 жыл бұрын
Hey, either switch to sync common or add a little bit of smoothing. Another alternative is to change your XIM to 500hz.
@szaki27i
6 жыл бұрын
Please help!!! I can not for China, install an XA application, on a Sony Xperia S smartphone, as if a new version is available for download, and therefore; / Can someone steer what to do??? Thx!
@trunkflush2755
5 жыл бұрын
My mouse have 12.000 dpi but I put it on 5000 with a agressive balistic curve to have more turn velocity,minute 11.20 on your second balistic curve tutorial,1000 hz and 5000 dpi os correctly?
@XIMCentral
5 жыл бұрын
That curve is really helpfull in games with a slow maximum turnspeed. If your game doesnt have a slow turnspeed then i wouldnt use the curve as its not really needed. But overall yes the curve will increase your mouse sensitivity so it sounds fine that you reduced your dpi from 12000 to 5000 (which basically reduces your mouse sensitivity keep the same mouse speed with the curve than without the curve).
@danchozafirov8614
5 жыл бұрын
İ have a logitech 502 hero but i don't wich settings i need to use? Please help
@XIMCentral
5 жыл бұрын
For the Logitech G502 you have to use the Logitech Gaming Driver to adjust your mouse settings, also make sure to tick the onboard memory box in the opening screen so that your changes carry over to the xim.
@lcentury5586
6 жыл бұрын
The funny thing for me is that I've been using 450 dpi on both my xim 4 and computer. I dont notice the stutter much on my xim 4 but ive probably acclimated. By going around 3 to 4k dpi on my xim do you believe my performance will be more similar to PC then and improve?
@XIMCentral
6 жыл бұрын
Your mouse movements will be more responsie and precise, in return you will lose a lot of aim assist strength as the lower the dpi the more aim assist you have. If your xim4 sensitivity was above 100 then you will notice the better mouse movements quite a lot, especially when doing slow precision movements.
@lcentury5586
6 жыл бұрын
My sensitivity is 500 and I run 450dpi. Would it still be better to convert to 3000-4000k dpi and use low sens instead? Also, should I max my sensitivity in game to make myself more accurate?in destiny 2 I use 7 sens with my initial settings of 450 dpi and 500 sensitivity I also do a boost of 35 in my mouse setting
@XIMCentral
6 жыл бұрын
Yes absolutly, you basically ignored every important apsect for your XIM to opperate as it should. If you want the best possible mouse movements you MUST always set your ingame sensitivity to maximum, and in most games you even need to set further ingame adjustments that you can find here: community.xim.tech/index.php?topic=43775.0 Your XIM has been optimized for one specific ingame setting, if you use anything else it wont work well. Also your XIM needs at least 3000 dpi to give you PC like mouse movements, the reason behind this is explained in the video above.
@kongmufasa5528
6 жыл бұрын
Nice vid. I have Xim4 and Apex. But I must admit that I do play best with Xim4. I somehow can't hit the enemies like I use to, when playing with Apex. I have tried the link and got a new sensitivity,but again it feels very slow for me when dropping to 4000DPI. My mouse is Logitech G900 My DPI is 7200 Hip 24 ADS 15 500 hz Game Battlefield 1 Xim 4 (Havn't found the best sensitivity for me on Apex yet). Anything else that I should do,for not having slow movements at 4000DPI?
@XIMCentral
6 жыл бұрын
hey, are you sure you saved your dpi on the mouse? (see the end of the video with the logitech gaming driver) also please download and install this xim firmware, go into the global settings and tick the expert mode. after that you can change the Sync rate in your xim config, put it to default. Now you have the original xim4 feeling with the xim apex benefits of eg 500hz :) zowie.benq.com/en-eu/support/mouse-rate-checker.html if you run on the old firmware then you cannot do this and your xim apex will feel different to your xim4.
@kongmufasa5528
6 жыл бұрын
XIMGameplay thanks for your reply. Yes I have, to the on-board memory. Did 4 profiles. 3200 , 4000 , 7200 and 12000 DPI. Different load in the xim manager for sensibilities matching the profiles. 7200DPI is what gives me the right feeling. But I have seen many KZitem settings being in 3000-5000 as you talk about in your vid. So don't understand why my experience of 4000DPI is slow. Will try your suggestion later when I get home.
@kongmufasa5528
6 жыл бұрын
XIMGameplay I made it work by using the beta firmware instead of the latest firmware. It now works and smoother than the Xim4. Thx for your help.
@XIMCentral
6 жыл бұрын
oh sorry i should have mentioned in the video that this is based on the very latest (beta) xim firmware. nice to hear that its working for you now!
@-pp-
3 жыл бұрын
What is best sync,hip and dpi for cod I'm currently 3200 dpi and 60 default
@XIMCentral
3 жыл бұрын
Hey, for that see my respective CoD config video, i always cover that in more detail! :)
@NM-vj8nc
9 ай бұрын
Is this true also for the XIM Matrix? That DPI above 4000 is unnecessary
@XIMCentral
9 ай бұрын
XIM Matrix works differently, something around 8000-12000 seems to be ideal.
@lazirus7692
6 жыл бұрын
Nice, will try that method. The xim apex has much more potentiality, and yes we would like to see more tutorials about this topic to get much out of this small beautiful device.
@XIMCentral
6 жыл бұрын
definitely, i will continue to upload more tutorial videos :) next up is a "how to increase and decrease aim assist" and a "synchronization tutorial". if you would like to see other topics being covered just let me know!
@lazirus7692
6 жыл бұрын
XIMGameplay thx for the effort man.
@plazmq3572
5 жыл бұрын
I have a g pro wireless and when I press the Logitech button on the xim app it says 1000 HZ USB does that mean I should use 1000 HZ ?
@XIMCentral
5 жыл бұрын
It just means your mouse currently uses the 1000hz profile, which doesnt give any indication on how constant the signal is. Do one of the polling rate benchmarks to find out about that kzitem.info/news/bejne/tIaN3aR4cpx3lGU Mouse dpi is a different value.
@babopalabo7897
5 жыл бұрын
Ich habe meine Maus auf 12000DPI laufen ist das nun falsch so wie ich das verstehe und soll lieber mit Max 4000DPI spielen?
@XIMCentral
5 жыл бұрын
Je nach Mauspad Typ kann weniger DPI zu mehr Präzision führen, also ja probiere es am besten mal aus.
@baggzilla
6 жыл бұрын
playing mainly rainbow six siege.. tried this and its much better for me.. but for the sync which i better for this game? im using common with 5 smoothing
@XIMCentral
6 жыл бұрын
common is really good, with default its the best sync setting in my oppinion. since you use smoothing 5 i would highly recommend you to switch your mouse polling and xim polling to 500hz and play with 0 smoothing, this should give you even more accurate and responsive mouse movements :)
@baggzilla
6 жыл бұрын
XIMGameplay thanks I will definitely try this..
@baggzilla
6 жыл бұрын
XIMGameplay thank you so much for the tip..im loving it.. before it's very hard to shoot camera specially when it's far.. but after doing this dpi settings and doing the 500 Hz it is much easier and faster..🤗🤗
@XIMCentral
6 жыл бұрын
great to hear! within the next day ill upload an aim assist customization tutorial, im sure this will increase your gaming experience even more ;)
@baggzilla
6 жыл бұрын
Do i have to turn on the aim assist in R6S??
@The-Real-Jami
4 жыл бұрын
Please I need help what is the best dpi for logitech g502 hero in rainbow six siege?
@XIMCentral
4 жыл бұрын
For RB6 it isnt different to the recommendations of this video, it only depends on your mousepad.
@The-Real-Jami
4 жыл бұрын
XIMGameplay okay cheers mate
@thomaslarsen4354
6 жыл бұрын
Hallo XIMGameplay I have just bought the apex. All settings are set, but my mouse do not respons when i make slow movement. Its not smooth movement like in your videos. My dpi is set for 36oo. Can you help me - im so lost with this. :/
@forgottenvagabond
5 жыл бұрын
Will using 1200 dpi be good as thats what i usually play on fortnite
@XIMCentral
5 жыл бұрын
1200 oder 12000? 1200 is kind of low, you want at least 3000 dpi so your xim can give you the best mouse movements.
@brantpeterson2287
6 жыл бұрын
for me, in fortnite, with a high end g900 mouse i feel the 500hz, 500 polling has the least amount of jitter at 4k dpi, steel mouse pad, interesting to try a plastic one though like the video says. there is a pretty big difference betwen a clean mouse pad and not as well as oils can build up from sweating. i clean mine twice a week. it helps. great informative video, man nice work!
@XIMCentral
6 жыл бұрын
if your mouse runs best with 500hz then this could indicate that it struggles to send a constant 1000hz signal, whenever you mouse drops lower than 1000hz it will cause jitter with the xim. here you have a website where you can test if your mouse runs steady 1000hz, move your mouse very fast in circles: zowie.benq.com/en-eu/support/mouse-rate-checker.html in general i would recommend you to use 500hz though, theres hardly any benefit from going with 1000hz instead :)
@frontbattles8090
4 жыл бұрын
I have 1000 Hz and use the G Pro Wireless and feel like off sync with 12000 dpi is very good, why should I not go over 4000??
@frontbattles8090
4 жыл бұрын
No stutter no jitter.. Even not on cloth pads..
@XIMCentral
4 жыл бұрын
In that case you have a really good clothpad. 12000 dpi will give less aim assist than 4000 dpi so that can be anoter reason to use less (or more if you dont want aim assist).
@frontbattles8090
4 жыл бұрын
@@XIMCentral ok thanks I don't know if I want more or less lol
@frontbattles8090
4 жыл бұрын
@@XIMCentral what do you think is better for overwatch right now default or off?
@XIMCentral
4 жыл бұрын
@@frontbattles8090 If you have good general aim then off is better, otherwise you pretty much cannot go wrong with default.
@plazmq3572
4 жыл бұрын
If I play with 90 hip which is quite high what dpi should I play on to have the least amount of stutter without it feeling like jelly
@plazmq3572
4 жыл бұрын
For example I use 28.12 ADS and 90 HIP so if I go to low dpi it feel like jelly when I aim but if I go to high it will be stuttering so what dpi is perfectly in between?
@plazmq3572
4 жыл бұрын
Currently I’m playing on 3200 DPI with these settings
@XIMCentral
4 жыл бұрын
@@plazmq3572 What xim snyc are you using right now? Overall id recommend to use 4000 dpi in your case.
@zv391
4 жыл бұрын
Hey I was wondering if you can use the Razer basilisk x hyperspeed wireless with xim apex
@XIMCentral
4 жыл бұрын
Yes, you just need to connect the USB wireless receiver to the XIM :).
@zv391
4 жыл бұрын
@@XIMCentral thank you so much for the quick reply I was worried it wouldn't work on the xim apex and I just ordered it as an early birthday present
@XIMCentral
4 жыл бұрын
@@zv391 Let me know how you like the mouse once you got it! :)
@zv391
4 жыл бұрын
@@XIMCentral I got it and it takes time getting used to the new shape of the mouse I just had a question I'm an xbox player that uses 3200 dpi 50 boost and 2 aim smoothing (basically froeee's settings) would it be possible to convert my ads and hip to 16000 dpi? Also someone told me to not use the smoothing feature on xbox instead to try the value 0 would you recommend I do that?
@XIMCentral
4 жыл бұрын
@@zv391 Hey, boost and smoothing cancel out each other so im not sure why you use both at the same time. One or the other might have a stronger effect so it would basically be like playing with a very low boost effect or smoothing. Theres also the chance they completely cancel out each other (depending on their effective strength with these values). Either way, as for your question your sensitivity is indirect proportional to your dpi value. So if you double one side you have to divide the other by two. That way you can quickly calculate what your new HIP and ADS sensitivity have to be to keep the same overall sensitivity with your new dpi value :).
@ezox2037
6 жыл бұрын
I use 12.000 dpi but now I am confused between 3200 or 4000 whats better you think?
@XIMCentral
6 жыл бұрын
there is hardly any difference between the two, in your case i would recommend you to go with 4000 because then you just need to multiply your current xim sensitivities with 3. thats easier math than when using 3200 ;)
@poppychalupa9390
5 жыл бұрын
Please help me with my XIM bro.... when I plug the usb cable into my controller it won’t connect to the xim my mouse and keyboard connect just fine.... I’m using a a good quality usb 3.0 cable into my xim and it still won’t connect I don’t know what to do.... I have used every usb cable I have and not even the good quality usb 3.0 cables work...
@XIMCentral
5 жыл бұрын
Hey, i answered to your other comment. If you want to you can also create a topic in the xim support forum.
@poppychalupa9390
5 жыл бұрын
XIMGameplay alright thanks Man I appreciate it yeah sorry I commented on both ur vids I just really want to get my xim working I will create a topic
@박준성-u3i
5 жыл бұрын
I'm a PC game player, Fort Knight, Apex Legend Battleground, Overwatch. Mouse 800dpi low sensitivity Use ps4 pro xim apex When using g502 mouse, what dpi should be used as 1000hz or 500hz? Please advise me on additional sensitivity.
@박준성-u3i
5 жыл бұрын
We are currently using 1000 hz 12,000 dpi. It's too fast to turn the city around. I feel like I'm getting a little delayed in response to the low-latency city of Mouse Aime. I can't be the same as Pc Mouse, but I can't. I'd like to be similar. Please help me.
@박준성-u3i
5 жыл бұрын
BALLISTICTS editor for some purpose Are you writing this?
@XIMCentral
5 жыл бұрын
@@박준성-u3i Hey, please try 3000-4000 dpi and 500hz on both the xim and the mouse. You can also try 1000hz for both the mouse and the xim, but not every mouse works well on 1000hz.
@박준성-u3i
5 жыл бұрын
Thank you, Bro. at 3000-4000 dpi and 500hz. I'll test it.
@trevorlau8124
3 жыл бұрын
Hey sir what dpi if I use if I use a stupid cardboard as my mouse pad? Thanks
@XIMCentral
3 жыл бұрын
Apart from what i already wrote you i would suggest you to google this as there might be a lot of people who have already tried it and have shared their feedback on some websites.
@petergraffin4454
5 жыл бұрын
I need help I have a magic eagle keyboard everything works except the mouse it says on the app unknown it says unknown 125hz
@XIMCentral
5 жыл бұрын
What kind of mouse do you have?
@khalidm469
3 жыл бұрын
Is it ok to use 2000 dpi sync default With values less than 50
@XIMCentral
3 жыл бұрын
Yes absolutly! :)
@ocvrth8955
3 жыл бұрын
Can i use me Roccat Pro Air with the Xim Apex?
@XIMCentral
3 жыл бұрын
Hey, i dont recall any feedback on that mouse, so maybe also ask in the XIM Forum if someone already tested it :).
@pureego1553
6 жыл бұрын
So is the turn speed my current xim sensitivity? And also does this apply to xim 4? Haven't upgraded to apex yet
@XIMCentral
6 жыл бұрын
the turnspeed is the aim movement speed in your game with your mouse (for the calculator). if you change your dpi you want your mouse to be as fast in the game as before, the calculator will take care of that :) and yes this also applies to xim4, the interpolation cap for xim4 is xim sensitivity 100 :)
@1999chita
5 жыл бұрын
Does a benq zowie mouse work cuz it doesn’t show me the logo
@XIMCentral
5 жыл бұрын
Yes it does, i also have a Zowie mouse and it works very well with the XIM. Make sure to use it on its highest DPI profile.
Пікірлер: 927