I’ve seriously gone through 8 videos to find out if dmx (cheaper $$) can properly handle xlr. You were the first in 40min to even touch on the subject! Thank you! You’ve earned my subscription.
@LeisuretecDistribution
Жыл бұрын
Thank you, that's great to hear we helped!
@hornetIIkite3
10 ай бұрын
This really was the info I needed. And more than I knew I needed
@michaelkindred5114
2 жыл бұрын
Back in the days when I played in bands, we didn't have this technology; and regretfully I was distracted when I should've been learning. Now I'm setting up a home recording studio because I joined the music team at my church ( Leveno Ideapad 330S [ not sure if it's a good fit, but it's what I already had ] ; Yamaha mixer board ; Focusrite 2i2 Duo 3rd Gen ; Rode NT2-A cond mic ; and my lovely Shure Beta 58A ) . Should I be using DMX or XLM for recording video and audio to my bandmates at church? I'll be sending videos to my bandmates (and youth musicians) of how I play our popular songlist, and to collaborate on original songs. Thank you.
@DavePatrick
6 ай бұрын
Very useful thank you. One thing that you didn't cover though is how to identify if a cable you have is XLR or DMX. I've got tens of cables that I assumed/ thought were XLR. How can I check and identify which is DMX and which is XLR?
@LeisuretecDistribution
6 ай бұрын
Hi Dave, thanks for your comment! There are next to no visual differences between the DMX and XLR cables. There are some tale-tale signs of each but nothing definitive. Firstly, if you have a 5 pin cable, this will automatically be a DMX. The DMX cable itself however will usually be ‘stiffer’ and have a gloss finish to them (but we cant vouch for every DMX cable), plus a model number, name or what it should be used for may be written on the side. An XLR cable will usually have a ‘matt’ finish to it and be a lot more flexible as they’re used with mic’s and, again, could have ‘XLR’ or ‘microphone cable’ etc… written on it. I hope this helps, thanks, Leisuretec
@raggaroaringsound
Жыл бұрын
Is there a difference between an XLR and DMX connector? Building a rack and I use XLR thru ports.
@jedgould5531
2 жыл бұрын
But short of an impedance measurement, how can you tell the difference between them if you have both? (glaring omission!)
@LiveeviL6969
Жыл бұрын
Great question. When I bought my DMX cables, I immediately tagged them so I wouldn't mix them up with the XLR cables.
@bounesragabdenour3046
3 ай бұрын
Useful
@SHICHANGDUAN
5 ай бұрын
What is difference between dmx cable 5 pin with 5 couductors and dmx cable 3 pin with 3 couductors ?
@LeisuretecDistribution
3 ай бұрын
DMX was originally designed with the 5 pin cable, this included space for expansion for future iterations with pins 4 and 5 but never happened. DMX uses 3 pins so most new DMX equipment now comes with 3 pin DMX instead of 5. Basically no difference apart from the connector and 2 unused cables in the 5 pin version.
@Tsamados
6 ай бұрын
I've got an old Japanese DAT machine with a 5 pin XLR socket, would it be possible to swap the socket for a 3 pin XLR socket?
@LeisuretecDistribution
6 ай бұрын
Hi, Could you let me know the model of the DAT machine?
@Tsamados
6 ай бұрын
@@LeisuretecDistribution it's an Aiwa HHB Pro 1 portable DAT
Пікірлер: 17