The excitement just keeps building up, cant wait for it to arrive at my doorstep!
@thatoneguy8834
5 жыл бұрын
I'm waiting for mine as well
@matteomelfa
6 ай бұрын
Yes but it doesn’t sample!!!!
@keith6743
5 жыл бұрын
man i have been watching SpinnZinn for the last couple of days.... ready to sell everything and make this my setup love the creativity with traktor and this mixer... the other video you have with just the X2 but i think i would still add a traktor F1 still like the use of remix decks
@StevanDjumic
3 жыл бұрын
traktormaps.com/store/xone-k2-remix-decks
@azmael3803
5 жыл бұрын
Can I feed the 4 main channels + returns a and b from software (= all 6 stereo outputs used) and still record the master in software?
@bendikbaksaasodin
Жыл бұрын
Hey! For some reason I can not get any signal on the four main channels when using them as inputs with the mixer as an audio interface. The two return channels work tho, and also the master when activated. This has worked before, but not now. Is it because of Mac OS upgrade? Or how to fix it? I would like to record my sets in multitrack. Sending audio from ableton on the main channels and effects plus drum machine on return channels. Also, is it possible to mod the mixer so that the record ins are post fader and eq? Just dont understand the reason its put before, when is that convenient...? I love this mixer, and I would love it more if wasnt for all the quirks. Thanks in advance, Bendik Baksaas.
@xonedjofficial
Жыл бұрын
Hi Bendik, Thanks for the message, The Xone:96 was primarily designed with DJing and live performance in mind, and not so much for multi-track and studio. However, we do understand that some users are using it for such a tool, which is fine, but is not really built for this purpose. That is why you are personally finding gripes with it. FYI, the USB upstream on stereo channels 1-4 (USB 1-8), was designed for the implementation of DVS. Having the routing configured this way enables the DVS signal to go direct to a computer. For the issue you are experiencing, please ensure that the input source selector is set correctly on the said channel you are attempting to come back on. Also, in Ableton please ensure that all I/O is active in the audio preference setup window. If you require further assistance on this, it best to reach out to us at support@allen-heath.com where we can offer more comprehensive support. Best regards, Luke
@bendikbaksaasodin
Жыл бұрын
@@xonedjofficial Thanks for the reply. Yes I understand. For your next high end mixer I dream of having to record multitrack exactly as it was performed (volum, eq, and filtering). It will be a thrill for every live act performing music on drum machines and synthesizers and I am sure a lot of people would buy that, because then producing a track out of stems from a live performance will be very easy and fun way to create new music. There is no other product doing this well and at the same time being a good performance mixer, so you would get a lot of customers I think. Have a good day, Bendik.
@SLBD0000000
5 жыл бұрын
what's the specs on the DAC and phono amp? does the mixer route physical inputs to DAC pre or post preamp/eq/fader?
@Astral_Field
2 жыл бұрын
Hi, I can't see the link to the Ableton file is this still available??
@molina.unofficial
5 жыл бұрын
Blew my mind. Great piece of hardware! Why are you sending both your Drumkit, in Ableton, and the Reverb channel to 11/12 though?
@azmaelurbankiz2576
4 жыл бұрын
He likes to do feedback loops with the delay, therefor needs it isolated on channel 9/10
@salimandrake
5 жыл бұрын
why when i go through lines inputs to ableton i cant equalize. its just pre eq.
@DiiGiiTAL
6 жыл бұрын
Very interesting indeed. @SpinnZinn - would love to see some live performances with this exact setup!
@adamcain2028
6 жыл бұрын
He has one I know of that was part of the 96 introduction a few months back.. search for the digital dj page
@SevenBeatsmusic
3 жыл бұрын
Can you help me on this: I'm trying to record dj set through 'record' port. On the other end is Zoom h1n recorder which gets the signal on the line in port. When one channel is going, everything is fine but when I'm making transition and two or more channels are playing simultaneously, I get crackling noise on the lows. I tried switching the cable and turning down gains but crackling is still there. Is there anything I'm missing out here, I'm out of options? Thank you in advance
@xonedjofficial
3 жыл бұрын
Hi Sven Beats, Thanks for the message. It sounds like you are not leaving yourself enough headroom on the recording device. Please adjust the input level on the recording device and make sure that you leave yourself enough headroom for when the master mixer master bus runs a little hotter from the summed signals when mixing. Regards, Luke
@SevenBeatsmusic
3 жыл бұрын
@@xonedjofficial hey Luke, thanks for the quick response. I tried that as well, forgot to mention it. Even if put it on minimum, it's the same. Don't know how to explain the crackling, it doesn't come from the recorder the source is the mixer (the signal is distorted before it reaches the recorder). Is it possible I need some additional cables? I found on Google that attenuator may solve the problem? Thanks again
@xonedjofficial
3 жыл бұрын
Hey Seven beats, I hooked an HN4 up to a 96 record out and was able to get a good result. I had to turn the input on the Zoom below 10. The Zoom indicates when it is clipping by the input 1/2 buttons will flash. If you are still clipping when you are turned all the way down. I would assume you are using XLR on the Zoom. Don't! This is for mic level only. Please make sure you are using the jack on the combi socket. The mic pre-amp simply can't handle anything line-level. Hopefully, that is it! For ongoing support with troubleshooting, please drop us a line via our support ticket system. support.allen-heath.com/ Best regards, Luke
@xonedjofficial
3 жыл бұрын
Sorry, you're on the H1n There is only a 3.5mm input for external device hook up. But it is switchable between Mic and Line. Therefore, please make sure the socket is set to 'Line' in the H1n device settings! Thanks, Luke
@SevenBeatsmusic
3 жыл бұрын
@@xonedjofficial hey Luke, just wanted to update you on this. I didn't manage to make it work, it turned out I needed something between to control the volume, h1n was getting too strong signal. I ended up hooking a Pioneer djm 350 on rec out and using djm built in USB recording. That worked great. Anyway, thanks for trying to help 💜
@LarryFerrari-qi3tl
Жыл бұрын
Lovely product but how do I regulate the master volume coming from an USB source like traktor without the need to cut the frequencies with the trim?
@xonedjofficial
Жыл бұрын
Hi Larry, Thanks for the message, To run at 0dBu into the mixer. You can use either use the software’s gain control on the virtual playback deck, or the master level out on the computer. I hope this helps! Kind regards, Luke
@Jean-LouisMayans
5 жыл бұрын
Is there an option to see the same uploads but with the xone 92 please. Thx friend, saludos.
@colinx6335
4 жыл бұрын
Hi @Xonedjofficial - I appreciate very much the K2 mapping and session you provided for download here, but is there an image or drawing you could add or post that shows which functions have been mapped to the K2 buttons, knobs, and sliders? If I recall from other SpinnZinn videos, some are controlling traktor and some ableton (?) but it's hard to know what's what. Thanks
@Kalbensi
4 жыл бұрын
hello, how the Xone 96 sound card is behaving on a production setup (only abtleton live with synth and midi controllers etc) Is it worth using to produce music ? thank you !
@xonedjofficial
4 жыл бұрын
Hi Khalia, Thanks for the message. This really depends on many variables, so it’s hard to give you a direct answer as we don’t know what your full integration intent is here. I would probably say that if you want this product solely for the purpose of music production, there are better suited products available that are roughly within the same price range. For example, a QU-SB or QU-16 would be a better tool for this type of scenario. www.allen-heath.com/key-series/qu-series/ If you wanted something for both DJ-ing and music production, then a 96 would be a good product to bridge between these two activities. If you have some external hardware that you needed in route into the computer, you could take advantage of the 96 built-in sound cards. The full listing of the soundcard I/O please check page 23 in the user guide; www.allen-heath.com/media/AP11645_2_XONE_96_USER_GUIDE.pdf For further guidance on choosing the right product for your personal requirements, please contact our distribution partner in your country. Contact details can be found on our where to buy page. www.allen-heath.com/where-to-buy/ Kind regards, Luke
@Kalbensi
4 жыл бұрын
@@xonedjofficial Thanks for your feedback, I do have a Xone 96 and I want to use it as a mixer with my vinyles and as a sound card when i do music production, I'm discovering it and the number of inputs and outputs are interesting... I'm currently on Catalina and I was wondering If i need to install the firmware app from your site (I can't run it under Catalina which is very weird).
@MiqMartin
5 жыл бұрын
Hi, I was trying to record my set with Audacity though a usb cable connecting my mac to the mixer. For whatever reason Audacity is only recording Channel 1 but no Channel 2. Even if I bring the volume from Channel 1 all the way down it's still being recorded. What am I doing wrong? Thanks!
@xonedjofficial
5 жыл бұрын
please contact our support staff at support@allen-heath.com so we may assist you in getting your configuration set up right!
@scottmenzies208
5 жыл бұрын
@@xonedjofficial I'm having a problem with this also in audacity. I'm not getting anything at all though, not even one channel. Thanks!
@loedn3024
5 жыл бұрын
One question before I throw all my money at you... can you route traktor's midi master clock to the midi out in the mixer? I do have a synth live setup and I would love to integrate it without the need for ableton
@xonedjofficial
5 жыл бұрын
Loedn, yes you certainly can!
@loedn3024
5 жыл бұрын
@@xonedjofficial alright on my way to the shop then!
@DJayFunk1
Жыл бұрын
Track id?
@MoogerTuber
5 жыл бұрын
Thanks for the overview. Can this be used for live performance with groove boxes, samplers, synths and the like? Are there any limitations in this regard? I am not a DJ but DJ mixers somehow seem more appealing to me that standard mixing consoles.
@mullen6134
5 жыл бұрын
Yes you can. This mixer is great for live performance and hybrid setups. I would still recommend routing everything through ableton and then you can route individual ableton channels to any of the 6 channels on the 96. That way ableton can easily keep everything in time and on top of that you could even assign any of the controls in ableton to the many knobs/buttons on the 96 that are able to send/receive midi signals. You could also run all external hardware directly through the 96 and then set your drum machine or groove box to be the master clock. Like have a drum machine running on channel one as the master clock, an analog synth running on channel 2 of the 96 thats receiving the master clock signal from your drum machine etc etc. I freaking love this mixer so far. The sound is incredible
@MoogerTuber
4 жыл бұрын
Matthew Mullen Thank you so much for your response Matthew! Very helpful. It’s been 11 months and I seem to have missed it, however I found your response just in time as I’ve just ordered a 96.
@bdslide5179
5 жыл бұрын
At 2:19, You recommend running Traktor 2.11.13? I just checked for updates with Native Access, and it is saying 2.11.3 is the latest. Can you please confirm if this is correct? Thank you.
@soultouchers4425
5 жыл бұрын
Yea thats the latest version of traktor 2, but for Xone 96 support you need traktor 2.11.13 or higher. So 2.11.3 is better, but from 2.11.13 it's working as well.
@SLBD0000000
5 жыл бұрын
Is there a way to adjust the signal levels, phono in particular, prior to AD conversion? Tried using the Xone96 to digitize vinyl records, but a couple of the louder cut records clip the sound card input.
@xonedjofficial
5 жыл бұрын
Hi, Thanks for the message, if you are getting a hot signal straight off the pre-amp. May we suggest recording off the Send channels or master on USB channels 9&10 or 11&12, that way you can control the overall level going into the DAW with level controls on the mixer. Kind Regards,
@SLBD0000000
5 жыл бұрын
@@xonedjofficial Not an option since I don't want to color the sound through additional circuits. Bit of a shame this wasn't anticipated..
@dannybr3wer93
5 жыл бұрын
I understand that there are 6 channels that can be used stereo line or phono. I am right?
@azmaelurbankiz2576
4 жыл бұрын
I tried having Ableton and VDJ share output 11/12. Seems to work fine.. anything I should know?
@sparktribal
5 жыл бұрын
how can i record my set via usb using audacity? i selected the soundcard as input but i dont get any signal..i also tried with rekordbox and no signal too.
@xonedjofficial
5 жыл бұрын
Hello, Yes, it is possible to hook up to a computer via the USB-B socket on the rear of the QU mixer. This connection is capable of multi-track streaming to and from the mixer. When using a Mac this will work as a class compliant device, just plug and play. For PC you will need to download and install dedicated ASIO drivers that are available for our website. www.allen-heath.com/key-series/qu-series/#tab5 Regards, Luke
@Funkbutterfly
5 жыл бұрын
Wouldn't you set the return channels to usb 2? Otherwise isn't all the audio coming from the computer running traktor?
@flowlab23
4 жыл бұрын
Yes I think he did a mistake here... Ableton should go to USB 2.
@seekingpeacefulness
3 жыл бұрын
Thanks for the video! I have been struggling to record a set from my 96 for way too long. Tried using USB connecting to Mac as well as with an external sound card - both options result in nothing coming in. In every set up, I chose the 96 as the source, but it still doesn’t work at all. Please help, thanks :)
@xonedjofficial
3 жыл бұрын
Hi RQVX, Thanks for the message. The main points for recording via USB would be to ensure that you have USB channel 11-12 assign to MST with the top panel MST/SEND2 switch. Next, ensure that you have the 96-soundcard selected as the audio device and software routing is set so USB channels 11-12. This should now be routing audio from the 96 to the software. If you are still having issue recording on Mac running OS 10.14 (Mojave) or higher. Please check this article below! support.apple.com/en-us/HT209175 Past this, for further assistance, please drop us a line to support@allen-heath.com Best regards, Luke
@iwillnevergetone5
Жыл бұрын
@Xonedjofficial i'm only able to route USB 1& 2 audio to channel 1. it defaults to that upon plug in. none of the other channels will switch to USB even with that selected as the input. what do i need to do? i have the latest firmware installed
@xonedjofficial
Жыл бұрын
Hi Thad, The USB routing is fixed. USB 1&2 is only assigned to channel 1. If you want to route back to any other channel, you will need to select the desired USB stream. The down stream configuration is as follows. USB 1&2 = ST CH1 USB 3&4 = ST CH2 USB 5&6 = ST CH3 USB 7&8 = ST CH4 USB 9&10 = RTNA USB 11&12 = RTN B If you require further assistance with this, please drop us a line to support@allen-heath.com Thanks, Luke
@iwillnevergetone5
Жыл бұрын
@@xonedjofficial Thanks Luke!
@jameshardin8814
Ай бұрын
I’m just trying to record my DJ set on audacity and I’m running into a situation where sound from both tracks from channels 1 and 2 are both playing and will not fade using crossfader, channel fade or even gain. I have experimented with Channel assignment and have been unable to fix the problem. Is the xone 96 compatible with audacity or is there something else as far as software I should use? Please don’t say tractor.
@xonedjofficial
Ай бұрын
If you are on Mac, then it is likely that the software is not managing the Core-audio framework properly. The best thing is to try another platform or a third-party routing app. If using Windows or not the above, please drop us a message for detailed support. support@allen-heath.com Thanks, Luke
@jameshardin8814
Ай бұрын
@@xonedjofficial yes it is a Mac and I am going to try Ableton, I’m also going to run my signal out of the master, since I’m a home user and just use booth for my sound. Also going with a scarlet 2i2 for my interface.
@xonedjofficial
Ай бұрын
Yes, Ableton will work much better. FYI, you need to route USB 11&12 with the panel switch set to MST. Check this article for the 96-sound card routing. support.allen-heath.com/hc/en-gb/articles/24741954249233-Xone-96-Dual-Sound-Card-Routing Thanks, Luke
@mullen6134
5 жыл бұрын
What about syncing the two laptops using ableton link? Can this be done by just running them thru the mixer or do they need to be connected through a separate midi or USB interface?
@xonedjofficial
5 жыл бұрын
You can send MIDI data through the 96. Under MIDI devices you will see Xone:96 (Partner). Use this MIDI device to send clock from one computer to the other via the 96. We'll get SpinnZinn to make a vide on this topic asap!
@MrTonig12
5 жыл бұрын
I use two 1200s on channels two and three. Channel one I have a CDJ plugged in. I have a Kontrol X1 mk2 for decks A & B. Channels 1 and 2 are used for my dj samples. gonna insert a time code CD in a CDJ and then I can mix with three decks
@titiju3843
11 ай бұрын
hi, do you use your 1200 on normal vinyl, not time code? And your x1 allows you to use traktor effects? Thank you for your answer
@brianmccloskey8575
4 жыл бұрын
Is this possible with any of the other Allen and heath mixers? Could I set up say 2 laptops running traktor with an xone 92 pr xone 43c?
@xonedjofficial
4 жыл бұрын
Hi Brian, Thanks for the message. The Xone:92 does not have a built-in interface and the 43C has just the one interface. So, to answer your question. Yes, you can set up two laptops with these other mixers, but you will need additional third-party interfaces and a load of cables. Which Alex clearly explains in the video. Kind regards, Luke
@mikedubz5576
4 ай бұрын
Hi, im an owner of this mixer and i would like to know if it could run ableton live 11 or 12 in session view in order to run samples on a per example channel 1 kicks, channel 2 snares and so on also the 2 first Chanel to use it as fx send? Pardon my ignorance but i do not own ableton and dont want to purchase it for nothing. I mainly run traktor scratch pro 3. Thank you
@xonedjofficial
4 ай бұрын
Hi, You can route audio to six stereo channels on the 96. These are the four main stereo channels and the two return channels. When connecting to Ableton, I can confirm that it is possible to return a combination of audio and FX return to all six stereo channels. Thanks, Luke
@michaelyohoros9528
2 жыл бұрын
hello, very important question? is the xone 96 supported with MacOs sierra? thank you very much
@xonedjofficial
2 жыл бұрын
Hi Teo, Thanks for the message, Xone:96’s soundcard is Core Audio compliant on Mac OS. This means that no driver is required, and it will run as a plug and play device with Apple’s hardware. 96 was launch post OS12.10, so our test program would not have required testing this legacy OS. With that said, we have had Zero reports of 96 not working with any particular OS. And should simply work as a compliant device. I hope this helps! Best regards, Luke
@sunnykataria23
2 жыл бұрын
Genius !
@luchocastano6656
2 жыл бұрын
Guys! I just get the 96 !! How can i coneect my controler X1 Traktor ! Im kind of new at this ! Thank you
@smido8358
5 жыл бұрын
Hello, is it also possible to connect to other software, like Recordbox?
@kidinhisparentsbasement5596
5 жыл бұрын
im trying to figure out the same thing
@xonedjofficial
5 жыл бұрын
@@kidinhisparentsbasement5596 We've begun initial testing and yes the 96 works with Rekordbox DVS
@DJFAmenHeavy
2 жыл бұрын
Some algorithms on the H9 give wild feedback on the Xone 96. Any idea why?
@xonedjofficial
2 жыл бұрын
Make sure that you haven't got the Aux send turned up on mixer's the FX return channel, as this can cause feedback! Cheers,
@DJFAmenHeavy
2 жыл бұрын
@@xonedjofficial Thank you
@ibjrdion
3 жыл бұрын
How to set up my Mac book pro with Xone 96 for beginners ? What software program for Traktor I download /Traktor 2 or Traktor Pro 3 ? Any info will be helpfull ..Best regards .
@xonedjofficial
3 жыл бұрын
Hi ibjrdion, Sorry for the late reply. The Xone:96 is Core-compliant on Mac OS. Simply hook it up to your MBP and it will work as a plug and play device. All you need to do then is set up the software. 96 will run on both TP2 & TP3. There are instructions listed on page 30 of the UG on how to do this. Albeit, the instruction id for TP2, but will/should translate the same for TP3. www.allen-heath.com/media/AP11645_2_XONE_96_USER_GUIDE.pdf I hope this helps! Best regards, Luke
@drconflict629
Жыл бұрын
Can someone at A&H please explain why the master FX insert is not audible on the USB out recording? Who in their right mind thought it would be a good idea to have the master FX insert be pre USB recording, while all the other send/returns are post USB recording? My RMX-1000 is basically useless now, unless I get a second laptop with an extra audio interface and take the REC OUT from the Xone 96 to that with a cable. I really don't understand how these huge mistakes could be made for a mixer of this caliber and price tag.
@xonedjofficial
Жыл бұрын
Hello Dr Conflict, The USB sends 11&12 on the Xone:96 is a master bus send. The reason it was designed this way was to keep a clean feed on this bus from anything inserted on the master insert. Beside FX, these may also be devices such as limiters, or multiband EQ etc… It should also be noted that, inserting devices on the master bus of a premium analogue mixer may degrade the sonic transparency of the equipment. However, it is not the end of the world if you do want to route the record bus (which is post insert by default) via the 96 internal soundcard. This can be achieved by using an RCA cable as a jumper and run from the RCA record out to a spare line in socket on the four main stereo channels. You would then need to route the to the sound card and software via the corresponding USB channels and connector switching. Kind regards,
@kristianthesnake
2 жыл бұрын
Hi, Iwas wondering, I bought a xone 96 And havent yet bought cables as I moved studios. Im using basic bx8a maudio monitos. What are the best master out cables? Given the covid situation. I wanna order from amazon. Can you recommend some long ones for my master out ? Is it xlr to balanced 1/4inch trs? Please and thankyou 🙏
@xonedjofficial
2 жыл бұрын
A pair of MXLR to FMXLR (balanced) will suffice just fine here. What grade/brand of cable/connector is up to you? But for this application, I would say the difference will be negligible. All the best, Luke
@ivanvelez7668
3 жыл бұрын
hi there, good video. I wanted how I can purchase a T-shirt from alen & heath?
@xonedjofficial
3 жыл бұрын
Hi Ivan, Thanks for the message. We are currently working on getting a merchandise shop set up. please keep an eye on our website over the coming months. Best regards,
@rasmuslutzen
4 жыл бұрын
1:46 AUX 1 & 2? There is no AUX 1 & 2 on this mixer, it's not a XONE92. Why is channel 5 and 6 on the soundcard Send 1 & 2? It is not possible to record 6 stereo inputs while I also use the sends for external hardware effects? Maybe recording the effects on one of the returns. Not possible!
@xonedjofficial
4 жыл бұрын
Hello Rasmus, Yes, Alex was meant to say Sends 1&2, but most who have used a 92, such as yourself, will know that this is exactly the same as the 92 AUX. USB sends 11 & 12(from mixer) can either route Send 2 or the master feed. There is a switch below the master level controls to configure this. Having this set to master will enable you can capture a recording of everything that is running through the mixer, including the FX returns. Kind regards, Luke
@lk0707
5 жыл бұрын
Hi. The settings you provided for 11/12 doesn't work at all. Could you show example of that ?
@mullen6134
5 жыл бұрын
What do you mean, how is it not working? Ive been using my 96 this way without problem. Did you try pressing the USB 11/12 MST/SEND2 button? You want it to be pressed so its down if you are using the send 2 knob for return fx. If you dont have that button pressed then 11/12 is just going to be sending a master signal, like if you wanted to use 11/12 to record your set using traktors mix recorder. In that case you leave the button up and set traktors fx send input to 11/12 and then under the mix recorder tab you set the source to "FX Send"
@burger659
3 жыл бұрын
Hi, i use an audio interface already in my studio setup.. can i use the xone 96 to record the 6 channels individually via usb while my audio interface is connected or should i create agregate device in the mac or will i have to use only the sound card of the 96 only for both .. dj and production setup? Thanks !
@xonedjofficial
3 жыл бұрын
Hi B Burger. Thanks for the message. If you require both soundcards to manage I/O for a singular program, then you will need to create an aggregate device. FYI, the Xone:96 soundcards stereo sends (1-8) route straight off the mixer’s input connectors. The signal is not processed by the mixer whatsoever. It was designed this way for the use of DVS. It’s not totally ideal for multi-track recording. Though, if you were to use it for this type of application. The gain structure must be managed on the connecting outboard device. The final two sends (9-12) work off the mixer’s output buses Send 1 & send 2 or master. These signals will be processed by the mixer’s controls I hope this helps! Kind regards, Luke
@burger659
3 жыл бұрын
@@xonedjofficial ok thanks for the quick reply ! i wanted to use the 96 as my only audio interface & monitor controller for the studio..and for recording all my synths separatly via usb to the computer..but looks like it's not that good and i probably will have to keep my RME interface...?
@MrSnysokk
Жыл бұрын
It does not record the final mix, though. Beautiful mixer indeed. It sounds amazing. But why on earth does it not record the insert channel on the master track? The price is high. Being both the best dj mixer around and a good soundcard it seemed worth it. But now I need to use an external soundcard in addition to the xone96, to be able to rec the full set, and that was a big drawback. Inserts for fx is not that weird. I really love it, dont get me wrong. But I cant really understand the technical choice made, not including the final mix that runs out of the mixer. To me its a bit strange. And it took me a set or two in which the recording was lacking the inserts, before I discovered it. No info, heads up on the add, specs, manual or in this video.
@xonedjofficial
Жыл бұрын
Hi, Thanks for the message. The Master insert is not included in the MST USB send, as typically master inserts devices would be things like graphic equalisers or limiters. Admittedly it might have been a slight oversight on our part, to not recognise that most users would use this feature for FX processing. However, we would like to point out that it is possible to record the insert via the RCA record output. Furthermore, if you have the a ‘Line’ socket available on any of the four stereo inputs. You can use an RCA cable from the record out to the line in and then route the corresponding USB channels into the software. Doing away with the need of deploying a third-party interface. I hope this helps! Thanks, Luke
@MrSnysokk
Жыл бұрын
@@xonedjofficial Hi thanks for the reply! I admit that of course this is perhaps not the intended use of this device. But it has so many superb features also as an interface that the ability to record the final, final master would have been brilliant. Nevertheless, I have used the "hack" you suggested and that works fine of course, to connect the rec out, into one of the line in channels, for final master usb record. And it has become one of my quick go to device to make final external gear aux send/insert adjustments to mixes, since the mixer preamp sounds so damn good. With this ability this mixer to me is truly the perfect swiss army knife for both quick all in one allround solutions for dj´ing (vinyl, daw, digital, streaming) and diy home recording.
@ulsdigital
5 жыл бұрын
this setup is for ONE computer traktor plus Ableton? you can configure the send and return with ableton and push?
@xonedjofficial
5 жыл бұрын
Yes you can
@TrollingAintEasy4U
4 жыл бұрын
@@xonedjofficial how do I send the push 2 to the send a b c or d, I have selected usb 1 and also input config on Ableton is set to 9/10 11/12
@rollelagrange5708
3 жыл бұрын
The only way to record all the channel of the mixer, including return c & d, is by the RCA rec output ? Or can I also do it with only USB ?
@xonedjofficial
3 жыл бұрын
Hi Rolle Lagrange, Thanks for the message. The USB record bus will include all channels exempt the master insert and both mic inputs (which are on a clean-feed by default). Otherwise, all inputs that are routing to the main mix bus will be routed to the USB record bus. FYI, there are internal jumpers to deactivate the mic clean-feed. This will then enable the Mic to route to the booth and record outputs. I hope this helps! Best regards, Luke
@rollelagrange5708
3 жыл бұрын
@@xonedjofficial thanks for the reply luke. So, to be sure I understood... if I have traktor in the 4 main channels, ableton in the A&B returns and a synth in return C then the USB record bus will include all 7 channels right?
@xonedjofficial
3 жыл бұрын
Yes, that is correct!
@davelse8919
3 жыл бұрын
I have only one doubt. If I wanted to use the two channels (A and B) on the left side of mixer with external synths (with RTN A and RTN B input), I would have the possibility, through the internal sound card of the mixer, to record these two channels separately on DAW? In the manual it's said that the channels of the card 9/10 and 11/12 can be used with Send 1 and Send 2 but to me it's not clear what they mean. Thanks.
@xonedjofficial
3 жыл бұрын
Hi Davelse, Sorry for the late reply. Xone:96 has two send outputs which six of the input cannels can be assigned to. These sends will also (simultaneously) route to USB channels 9-10 &11-12 (From the mixer). Though, you need to make sure USB 11-12 is assigned to SEND2 with the top panel switch. The idea to then route signals from return inputs A&B would be to assign one channel to send 1 and the other to send 2 (A to 1 B to 2, would be the logical approach). Next, simply route USB channels 9-10 (send 1) to one stereo track in the DAW and channels 11-12 (send 2) to a second track. This will enable you to capture both return A&B inputs separately. I hope this helps! Best regards, Luke
@davelse8919
3 жыл бұрын
@@xonedjofficial Hi Luke! THANKS, it was the explanation I needed! If I can, i would ask you another question. Using the two sends (Send 1 -> Ch.A and Send 2 -> Ch.B) obviously I will no longer be able to use them as sends for effects on other channels. Ok, do you think it makes sense to use the two headphone outputs to send the signal to the two FX (Phone 1 -> FX1 and Phone 2 -> FX2)? The output signal from the two FX would then return to input on channels C and D. At the same time I would split the signal out from FX to two inputs on my sound card to record. Should it work in your opinion? Thanks! BR, Dave
@xonedjofficial
3 жыл бұрын
Hi Dave, It might be best for you to drop us a line to support@allen-heath.com I just want to get a greater understanding of your setup and may be able to offer a better solution for this. Please be sure to include as much detail of the hardware ecosystem around your 96. Thanks, Luke
@alejandrocaldas9018
3 жыл бұрын
Thank you for the video ....but I have a question How is the processes to do a duo B2B using a mixer xone 96 whit 2 computers using traktor pro and everything sound SYNC , any info help , thank you .
@xonedjofficial
3 жыл бұрын
Hi Alejandro, Thanks for the message. The Xone:96 soundcard has partner mode on the MIDI side of each sound card (USB 1&2). It is these partner modes that need to be utilized to share clocking between computers/software. Kind rgerads, Luke
@conorcalvert4419
Жыл бұрын
Trying to connect my xone 96, CDJ-3000 (x2), CDJ-2000nexus (x2) to rekordbox. Having a difficult time configuring audio outs. Would really appriciate some direction. CDJ 3000 are set up on Xone 96 as deck 2&3 however when using Xone 96 USB as audio out its all out of sorts
@xonedjofficial
Жыл бұрын
Hi Conor, Thanks for the message, The sound card downstream routing is as follows. USB 1-2 = Chanel 1 USB 3-4 = Chanel 2 (CDJ300) USB 5-6 = Chanel 3 (CDJ300) USB 7-8 = Chanel 4 USB 9-10 = Chanel RTN A USB 11-12 = Chanel RTNB If you require upstream data for DVS, please ensure that the USB routing switches on the rear panel are all set to ‘LN’. The soundcard I/O configuration can be found on page 23 of the user guide. www.allen-heath.com/media/AP11645_2_XONE_96_USER_GUIDE.pdf Best regards, Luke
@eyjavi
5 жыл бұрын
Hi, could you please tell us how Xone96 records a set, is it internally or do you need an extra cable? Thanks
@mullen6134
5 жыл бұрын
there are 2 ways that i have recorded a set on mine. First you can use Traktors mix recorder by sending the 11/12 master signal from the 96 to Traktors fx send and then selecting "fx Send" in traktors mix recorder settings as the source. The 2nd way, which i use pretty much exclusively, is I use a Tascam DR-40 audio recorder(on sale right now for $149.99). The 96 has a dedicated REC out on the back of the mixer so I just use an RCA to TRS cable and run it from the Rec out on the 96 and plug the Left Right TRS inputs directly into the Tascam DR-40. The DR-40 is able to adjust the input volume and also has a limiter to avoid clipping. Once I've recorded a set onto the Dr-40 I just pop out the SD card and put the file onto my laptop
@eyjavi
5 жыл бұрын
@@mullen6134 Thank you!!! :)
@soultouchers4425
5 жыл бұрын
I'm using a thirth way, from master output 2 to a different audio interface input( You could use your record input on a internal soundcard as well if available) and record the incomming data through audicity.
@kisho2679
3 жыл бұрын
i cannot hear the audio coming from GarageBand (miniMac) over USB1 to my Xone96 (though "blue light" is on). someone knows what are the settings to troubleshoot with this setup?
@xonedjofficial
3 жыл бұрын
For assistance with this, pleased drop us a line via our support ticketing system. support.allen-heath.com/hc/en-gb/requests/new Kind regards, Luke
@909Mark
5 жыл бұрын
I found my 96 level light was a bit unbalanced, and the left channel was a little stronger than the right channel. If recording from build-in interfacer to Traktor, Traktor's record level light is also unbalanced, how to solve it.
@xonedjofficial
5 жыл бұрын
Hi Mark, Typically, with stereo recorded audio you may find one side to the stereo image has more information, therefore, will show a higher meter level. That said, this will vary between different track and bias from one side to the other. If ever in doubt that your product has legitimate hardware fault, please contact your dealer for escalation to service or alternatively you can book directly for a service with distribution partner in your country. Distributor contact details can be found on our where to buy page. www.allen-heath.com/where-to-buy/ Best regards, Luke
@djkryssofficial9800
2 жыл бұрын
Hola, acabo de adquirir una Xone96 y tengo el siguiente problema… Cuando uso el Streamlabs OBS y toco los filtros de la mesa no hace ningún efecto en el sonido del Streamlabs pero si en la preescucha de los cascos incluso en el Traktor. La tengo conectada directamente por USB al ordenador, no se si es problema de algo que tendria que configurar en Streamlabs, en Traktor o en la propia mesa. Si pudieses echarme una mano respondiendo a la pregunta te lo agradecería un monton 😃
@xonedjofficial
2 жыл бұрын
Hi Kryss, Thanks for the message. If you would like some assistance with this. Please drop us a line to support@allen-heath.com Regards, Luke
@Francisco-qe1qz
Жыл бұрын
Tengo una duda sobre conexión y desconexión de USB y RCA, se puede conectar y desconectar cuando ya no lo use el cable USB en la Xone: 96 encendida? Y la misma pregunta con los cables RCA? Gracias!!
@xonedjofficial
Жыл бұрын
Hi Francisco, Yes, it is fine to hot-plug both the USB and RCA whilst the mixer is powered on. Thanks, Luke
@Zizouyou
4 жыл бұрын
i cant find any tutorial on how to download drivers. i cant see any download link
@xonedjofficial
4 жыл бұрын
Hi Jo, Driver installation is only required for PC, Mac is class compliant. There are instructions for the PC driver installation on page 24 in the 96 user guide. Please check the software tab on the product page to find locate the driver. www.allen-heath.com/ahproducts/xone96/ www.allen-heath.com/media/AP11645_2_XONE_96_USER_GUIDE.pdf Kind regards,
@igorguinart
5 жыл бұрын
Is any chance I could use both send 1 and 2 USB outputs and still record my set ??
@xonedjofficial
5 жыл бұрын
+Igor Guinart, there is a simple work around for this situation. Simply connect an RCA cable from the 96's record out to any of the 4 line level inputs you're not using, then set your software to record on that input.
@azercod19
3 жыл бұрын
Is it really impossible to record the xone96 on audacity ?
@xonedjofficial
3 жыл бұрын
Hi Tom, Thanks for the message. Impossible no, but can be clunky depending on the platform you are using and access you have to the 96 I/O. A workaround for recording with Audacity on 96 would be to use stereo input one as your record bus send. this will only work so long as you are not using channel 1 'line' input for anything. The idea would be to connect from the RCA record output, to channel 1 'line' in, then make sure the USB routing switch is set to 'LN'. The signal will then be sent directly to USB streams channels 1&2, which are the only two channels that seem to work in Audacity in certain situations. Finally, make sure channel 1 input selector is not set to LN with the fader up! As this would cause a feedback loop. Alternatively, you could use another number of freeware platforms, Reaper being one, which I personally know works well with 96 and can see and access the full I/O if the soundcard. I hope this helps and you manage to find a recording solution that works for you. Cheers, Luke
@matteomelfa
6 ай бұрын
Sorry, but can you sample with this mixer? If so .. How you do the connections?
@xonedjofficial
6 ай бұрын
Hi Matteo, The 96 does not have built-in storage, so it’s not possible to sample into the mixer. But you can either sample into computer software via the mixer’s USB or a dedicated sampler via the Aux sends. Thanks, Luke
@matteomelfa
5 ай бұрын
@@xonedjofficial Hey thanks for the prompt reply. I did not express myself properly. I would like to use the input of the soundcard to pass the sound into my daw (Ableton 12). Let’s say, in channel 1, I have a synth connected, which I would love to record using the soundcard of the xone. Somehow I can not see the meter reading the signals, so I cannot record my lines. I thought this would have been quite immediate and simple, but looks it is not, or else I am doing some silly mistake. Could you help ? Thanks again
@xonedjofficial
5 ай бұрын
Hi Matteo, Thanks for the follow-up. If you are connected to any of the four main stereo inputs on 96, you can route directly off the RCA input connector to USB. However, you must ensure that the routing switches have been configured correctly next to the socket. You will notice four white switches labelled LN: PH. If you are running a line-level device into Stereo 1, then the switch for this channel must be on LN for line input. The USB channel for Stereo 1 is USB 1&2. It is these channels that must be routed into the software. For further details on the soundcard routing, please check page 23 of the user guide. www.allen-heath.com/content/uploads/2023/06/AP11645_2_XONE_96_USER_GUIDE.pdf Best regards, Luke
@matteomelfa
5 ай бұрын
@@xonedjofficial Thank you Luke for your prompt reply! I will be back home in few days and it will be the first thing I’ll try. I’m glad to hear that is me doing a mistake rather than the mixer not being able to record! I only have to set it up right then! I’ll update you then. Many thanks for the support Luke, much appreciated!
@matteomelfa
5 ай бұрын
@@xonedjofficial Hi Luke, I have just tried again all the possible combinations. Nothing to do I am afraid. The only question is, is there a specific cable I should use? I’m using a normal usb type C cable from U green, and I have also tried a usb 2.0 connected to an hub. With these 2 cables I can only select the mixer, but not audio in. All ins and out activated… I really have no idea what is wrong. Please help!
@TrollingAintEasy4U
4 жыл бұрын
how are the two laptops linked?
@flowlab23
4 жыл бұрын
You can use Ableton Link to sync the two laptops via wifi.
@coincidencerecords
4 жыл бұрын
Had it now for a few months and although I do like some improvements, I don't really see why I couldn't have taken a 92 and saved some cash. I've been trying to connect the USB to a Macbook and use the laptop to capture the master/record signal (because I was hoping to stream audio using OBS) but somehow everything coming through are all the channels at once: so not just the master or just whatever channel is open, but litterally anything that is sent to the mixer (two CDJs in my case) just get sent to the USB output. No way of selecting a certain channel only in the drivers or via Audio Midi Setup... pretty annoying that there's no tool or software included to configure the i/o. So now I need to buy an extra app on top to make this expensive thing work for a pretty simple thing as basically adding recording through USB. Also, this mixer runs HOT. Really hot even after a few hours, that can't be good for the life expectancy of the parts, can it?
@xonedjofficial
4 жыл бұрын
Hi, We are sorry to hear that you are having some difficulty. For some reason OBS studio does not give full access to Core-audio I/O, this is to do with the software and not the hardware. For further information as to why it works this way you will need to consult the developers. Most audio platforms will give you full access to I/O of the 96 Core-audio devices, and we have not had this reported about any other software. The Xone:96 is an analogue mixer with a heap of functionality in its modest frame. Compared to an equivalent digital mixer it has a LOT going on, and these components/devices produce inherent heat. We always knew this product would run warm, it was important that the performance area (top panel) was not affected by heat - because this is where you put your hands while performing. To prevent this we moved the heatsinking to the sides of the unit, dissipating the majority of heat through the side panels. We embossed the side panels with small ‘bumpers’ to ensure a minimal airgap was maintained if butting up against a CDJ etc. A crucial new design element for us was the use of a thinner gauge Aluminium top panel, allowing better heat dissipation than a ‘traditional’ steel panel. Most importantly all of this meets the very stringent product safety testing required for any pro audio device (UL&EN60065) and has been extensively tested in the field throughout the summer at festivals and gigs across the world. All components have been assessed and are well within their recommended temperature ratings ensuring the Xone 96 will remain an integral part of your DJ setup for years to come. Best regards, Luke
@coincidencerecords
4 жыл бұрын
@@xonedjofficial don't get me wrong, I love the 96's layout and it performs great soundwise and all... but the heat DOES transmit to the top - and severely so actually. And I'm using it at home, in a hot and sweaty club where heat removal is even going to be worse I can't imagine components taking a beating. I've played in clubs that warm up to +40°C and the last thing you need is the mixer in front of you emitting additional heat like a radiator. And yes, it is noticeably THAT hot. If you touch the side panels it is really baking almost, it even transfers heat to the XDJs aside. So definetely a bit of a design flaw in my book. As for the USB output: I installed Loopback and got it working fine - just wished A&H had foreseen these type of issues and had made sure there was some sort of tool available. Your counterparts who shall remain nameless ;) make this a lot easier experience tbh. I wouldn't have ever considered moving but with the V10 for the first time I'm seriously considering ditching the Xone and forking over the cash to buy that beast instead. Shame really. I had high hopes and it did everything I needed on paper but...
@mateoschreiterer7545
4 жыл бұрын
can i play with the xone 96 just with de PC ? (not using any external device)
@xonedjofficial
4 жыл бұрын
Hi Mateo, Yes, you can solely use a PC as a playback device running third-party DJ software to give you virtual decks. There is no need for any additional equipment. Though, some users prefer the use the mixer in conjunction with a MIDI controller to operate the software (rather than a mouse). Thanks, Luke
@mateoschreiterer7545
4 жыл бұрын
@@xonedjofficial thanks for answering!!
@3d_Ink_Oficial
3 жыл бұрын
The 96 is compatible with Catalina and traktor pro 3 ?
@xonedjofficial
3 жыл бұрын
Hi Wanger, The short answer is yes to both. Xone:96 supports Apple’s CoreAudio/CoreMIDI framework so you do not need to install Device Drivers for use with macOS. This interface has been tested on and is compatible with macOS BigSur. Xone:96 is only supported on Intel-based Apple computers. Compatibility with the new M1 systems has not been fully evaluated by our team and, therefore, is not currently supported. Best regards, Luke
@3d_Ink_Oficial
3 жыл бұрын
@@xonedjofficial thanks so much Luke
@reddepo
5 жыл бұрын
looks like a Quasimidi Raveolution 309. ;)
@kosmikmusa
5 жыл бұрын
This is nice. Is there usb midi? Just wonder how to sync computers.
@xonedjofficial
5 жыл бұрын
Yes there is MIDI USB, you can also send MIDI from one USB port to the other. We'll be posting a video on this soon!
@mullen6134
5 жыл бұрын
@@xonedjofficial is this video up yet? Can't seem to figure this out or find instructions on syncing two laptops using Link
@casusa165
7 ай бұрын
@@mullen6134did you solve your problem ????
@casusa165
7 ай бұрын
@@xonedjofficialI can sync in a external Wi-Fi network between Mac/Traktor…..and iPad / blockwaves… Can I do it internal (xone 96) ???
@domdomNERO
4 жыл бұрын
is the interface working with mac os catalina?
@xonedjofficial
4 жыл бұрын
Hi Dominik, Yes, the Xone:96 dual USB interface is supported on Catalina as a class-compliant Core audio device. Regards, Luke
@domdomNERO
4 жыл бұрын
Xonedjofficial hi luke, thx for your quick reply - i just ordered the mixer! may the force be with you :-)
@emilianoibarra3537
2 жыл бұрын
how do you rout 2 single fx units on traktor to the return 1 and 2?
@xonedjofficial
2 жыл бұрын
Hi Emiliano, Thanks for the message. Traktor seems to only have a singular stereo send (input) and return (output) for setting up FX routing with an external device. This is accessible in both the input and output (‘external mode’) routing options. 96 is capable of routing Sends 1&2 and return A&B via USB. This can be achieved with any software that has the routing capabilities. The mixer routing for this is as follows: Send 1 = USB 9/10 (upstream) Send 2 = USB 11/12 (upstream) Return A = USB 9/10 (downstream) Return B = USB 11/12 (downstream) For more info on the software side of things, please contact NI support. Best regards, Luke
@emilianoibarra3537
2 жыл бұрын
@@xonedjofficial thanks!
@sashaatree6535
Ай бұрын
how to connect ipad to this?
@xonedjofficial
Ай бұрын
For connection to iPad. Ideally, you need a camera connection kit with USB & power, as the 96 USB does not supply bus power. Thanks, Luke
@braduscoduploads9231
4 жыл бұрын
Guys can anyone help me ?? I’ve just purchased an (xone 92) is there any way possible to connect this mixer to my laptop as I would like to use my laptop as a 3rd player??
@xonedjofficial
4 жыл бұрын
Hi Bradus, Thanks for the message. The Xone:92 does not have a built -in soundcard. If you solely want to use the laptop for playback from a media player or internet site or any software sending a singular stereo feed. It’s possible to use the computer internal soundcard. Providing that the Laptop has a stereo/headphone out port? You can then get yourself a 3.5mm jack to RCA cable and this will connect to any line in socket on any of the four-stereo channel on the mixer. If your intention id to use the laptop for play back form DJ/music production software, whereby, you want more than one stereo feed sent for mixing out the box. Then you would need to acquire and additional break-out soundcard. Best regards, Luke
@braduscoduploads9231
4 жыл бұрын
Xonedjofficial hi, thanks so much! If I was to get my hands on a sound card, does this mean I could have my laptop playing through channel 3 or 4 on the mixer and the sound would come out my speakers as it would when using a digital player ? If so what soundcard would be best to use?
@producedbym.o.o.d5169
5 жыл бұрын
My question to you is does this mixer have phantom power?
@xonedjofficial
5 жыл бұрын
No, the Xone96 does not have phantom power on the mic inputs
@producedbym.o.o.d5169
5 жыл бұрын
@@xonedjofficial Thank you and there are work arounds still an amazing mixer that its going into my arsenal.
@MrCalebgrayson
5 жыл бұрын
can i run two iPads? like DJPro on one and some FX or sequencer on another?
@xonedjofficial
5 жыл бұрын
We haven't yet tested the 96 with two Ipads... but since the 96 is class compliant on the mac platform, we don't see why not.
@MrCalebgrayson
5 жыл бұрын
Xonedjofficial so you can send the Aux sends out the USB to an iPad?
@xonedjofficial
5 жыл бұрын
@@MrCalebgrayson as long as the app itself can select which inputs and outputs of the external audio interface connected to use, then yes.
@MrCalebgrayson
5 жыл бұрын
Xonedjofficial i mean, can you have music tracks from iPad A, send them to iPad B for FX, and return them back to a channel all via USB?
@xonedjofficial
5 жыл бұрын
@@MrCalebgrayson Yes, again as long as the app themselves allow you to set input and output channels, you can send music thats playing on iPad A to iPad B via the sends for FX.
@rafflopez7911
4 жыл бұрын
What is the RCA input for? That says Record.
@xonedjofficial
4 жыл бұрын
Hi Raff. Thanks for the message. The Record RCA socket is an output for recording, this takes a feed off the master bus, pre-master level. I hope this helps! Regards, Luke
@rafflopez7911
4 жыл бұрын
@@xonedjofficial Thanks for the answer. In this case I can use this output to stream the audio from the mixer directly to the audio of a live mix on Facebook or obs studio.
@kenoba
5 жыл бұрын
how does k2 works? without usb?
@itimmy101
5 жыл бұрын
Its linked to the Xone96 where the mixer is hosting traktor!
@RoeJogan
4 жыл бұрын
Software for PC doesnt allow you to configure what is getting streamed... in Audacity... all you get is channel 1... no way to get 11/12 from Master
@xonedjofficial
4 жыл бұрын
Hi Tim, We have had a couple of customers come up against the same issue with Audacity. Audacity is unable to select ASIO drivers, so instead it uses WDM. This only gives you the option of the first two USB channels (96 channel 1). We are currently working on developing a WDM driver that gives you access to the 96 full I/O on PC WDM applications, unfortunately, I can’t give you an ETA on when this will be available. In the meantime, there are several free DAW applications that are known to run fine with ASIO drivers and the 96. As it stands this is not an issue with the mixer hardware, but we do hope you manage to find a solution that works for you. Kind regard, Luke
@albertocruz1174
4 жыл бұрын
I will never buy a Xone again... I had a Xone 4D and the soundcard doesn't work properly in windows. The support doesn't exists... There's no videos, no posts in the official forum and the official support are links to distributors that doesn't know nothing technical...
@xonedjofficial
4 жыл бұрын
Hi Alberto, We are sorry to hear that you are having some difficulty. Please drop us a line via our support ticket system, where we will be happy to help! support.allen-heath.com/ Best regards, Luke
@grhosso
4 жыл бұрын
Anyone knows how to send the sound from Xone 96 to the Traktor FX as an external FX unit but using the USB interface and the Send1 and Send2? Tahnks.
@xonedjofficial
4 жыл бұрын
Hello J.M Gross There are instructions on how to set up an FX send and return, on NI website. support.native-instruments.com/hc/en-us/articles/209590489-How-to-Use-the-Send-Effects-in-TRAKTOR Please be sure to reference page 23 of the 96 user guide, for the soundcard I/O config. www.allen-heath.com/media/AP11645_2_XONE_96_USER_GUIDE.pdf Best regards, Luke
@grhosso
4 жыл бұрын
@@xonedjofficial I go it. Thanks!
@billz094
4 жыл бұрын
Can I record my vinyl sets onto ableton with a usb cable?
@xonedjofficial
4 жыл бұрын
Hi Billyani, Thanks for the message. Yes, the Xone:96 has a dedicated master record bus on USB channels 11&12, this is on each of the built-in sound cards. Please ensure that these channels are selected within the software you are using for Audio capture. Also, be sure that the MST/SEND2 switch is set out to MST. For the full Soundcard I/O, please check out page 23 in the user guide; www.allen-heath.com/media/AP11645_2_XONE_96_USER_GUIDE.pdf Best regards, Luke
@billz094
4 жыл бұрын
@@xonedjofficial Hi luke thanks for the quick response! however i am still having trouble picking up any audio in ableton following your advise and the manual. would it be possible for one of you guys to do a video on this as there isnt any out there in regards to my specific goal ? p.s. (I am a Luddite vinyl junkie of 9 years trying to dip my toes into the digital world)
@xonedjofficial
4 жыл бұрын
Hi Billyani, Please make sure the Xone:96 USB inputs are active within the software. For Ableton, go to, preferences>Audio>Input config. Make sure channels 11&12 are active! Cheers, Luke
@billz094
4 жыл бұрын
No worries it has just started to work!
@billz094
4 жыл бұрын
One more question please luke! Can i use ableton delay and reverb fx whilst doing my vinyl sets. would save me lots of money on external fx units
@nostarak
3 жыл бұрын
cant find his ableton live project :/
@xonedjofficial
3 жыл бұрын
Unfortunately, the link is no longer available. Sorry about that. Kind regards, Luke
@marcellofrisardi6134
3 жыл бұрын
Why isn’t the link available anymore?
@TheLibrarianUSA
5 жыл бұрын
Serato?
@ProsixOfficial
5 жыл бұрын
EdwardTheLibrarian no one cares about Serato :)))
@xonedjofficial
5 жыл бұрын
Edward, Whilst the Xone:96 is technically capable of being supported by the Serato application as an interface, we could not reach a commercial agreement with Serato that was beneficial to both brands.
@TheLibrarianUSA
5 жыл бұрын
@@xonedjofficial Thanks for the insight. Been looking forward to put an Allen & Heath product in the studio but we are mainly vinyl and Serato. That's a real pisser.
@jimmym6931
5 жыл бұрын
@@xonedjofficial Serato support would be the icing on the cake... hopefully the future will bring an agreement. I have a 96 and its amazing!
@ilterates
3 жыл бұрын
The file is deleted. nooo!
@marknarain6617
3 жыл бұрын
hey zin can u dj wit the 96 and and MacBook Pro period
@xonedjofficial
3 жыл бұрын
Hey Mark, The question is… CAN YOU? 😉 All the best! Team Xone
@marknarain6617
3 жыл бұрын
@@xonedjofficial I am serious my MacBook Pro my hs8 and my xone 96 how can I dj wit the above mention or what do I need
@xonedjofficial
3 жыл бұрын
Hi Marc, Sorry if our humour was misconstrued. But yes, you can absolutely DJ with a laptop and 96 alone. Though, you won’t have much tactile control. So, it all depends on your preference really. If you are happy to trigger any software control/playback with the computer keyboard and mouse, there’s nothing stopping you. If you want something more tactile for mixing, you may need to consider extended control, either with a MIDI controller or turntables (DVS?). Again, it all depends on your personal requirements. I hope this helps! Cheers, Luke
@TeflonxDonx
5 жыл бұрын
How do you sync the two Macbooks running Traktor? Can the soundcards be ‘sync’d ‘ ??
@xonedjofficial
5 жыл бұрын
When you connect the 96 to your computer, you will see 2 new midi devices. One labelled USB 1 (or 2) and the other labeled 'partner' . You can have computer 1 send midi clock to the partner and computer 2 receive midi clock from partner. Once SpinnZinn returns from his tour, we'll have him put together a new video showing how to do this.
@TeflonxDonx
5 жыл бұрын
Xonedjofficial that would be great! I did my first B2B with my 96 at the weekend but was still using the Traktor link via Thunderbolt... 🤔
@courtneytaylor6174
5 жыл бұрын
Yes, I would love a video explaining that.. Currently I am running two macs, both with traktor and would love for them to be both sync without having any extra hardware.. Thank you@@xonedjofficial
@domdomNERO
4 жыл бұрын
Xonedjofficial we need help to sync two traktors on the 96 - where is the video? :-)
@adamcain2028
5 жыл бұрын
Hey Allen and Heath... Why don't you guys get your $h!t together and get these drivers out?? -20181027 17:09MST
@xonedjofficial
5 жыл бұрын
Hello Adam, The Xone:96 XONE:96 is a Mac USB Class Compliant, No Device Software installation is required for operation with macOS, or OS X platforms. PC drivers are available online; www.allen-heath.com/ahproducts/xone96/ kind regards
@mullen6134
5 жыл бұрын
@@xonedjofficial I think maybe he was talking about the firmware update
@mullen6134
5 жыл бұрын
If you meant the firmware update, i believe it should be on their site by next week.
@adamcain2028
5 жыл бұрын
@@mullen6134 no, I was talking about actually being able to download the driver's from the A&H site. I was just pissed bc I had JUST picked my 96 , got it setup to my monitors, updated Traktor 3 and when I went to download the driver's, A&H had shut down their site. I stopped crying when I took a breath and realized it's 1st world problems.
@Gunner11763
5 жыл бұрын
Am I the only one who is annoyed at him saying 9...6 and not 96
@HouseCleaningRecords
4 жыл бұрын
per an article I read, the mixer was named for the release date, June 9th...9/6...96
@harajinn2685
4 жыл бұрын
Hello my NAME is Xone 69
@discopurgatory
Жыл бұрын
Can I do this with a xone 43:c?
@xonedjofficial
Жыл бұрын
By default, 43C does not route the FX to send via USB. However, this can be changed and reconfigured with internal jumper settings. There is detail for this on page 18 of the user guide. www.allen-heath.com/media/AP9967_2_X43C_UG.pdf A couple of things to also be mindful of here. First, is the inherent latency from the conversion in and out of the computer. Second, the USB returns on 43C only return to the four main stereo channels. So, one of these would need to be used up as the return. I hope this helps! Thanks, Luke
@discopurgatory
Жыл бұрын
@@xonedjofficial thanks for the response :-)
@RobertoMusu
5 ай бұрын
sorry if I want to use output preview traktor in xone 96 how do I do it? which channel can I send it to?
@xonedjofficial
5 ай бұрын
Hi Robert, Thanks for the message, The preview player can be routed to one of the Xone:96 return channels on USB 9&10 or 11&12. You can then cue this mixer channel to listen to the preview. Best regards, Luke
@scottmenzies208
5 жыл бұрын
How do i get the signal from xone 96 to audacity, i'm struggling to get anything in? Tried prefrences and settling mixer on input on both, also had changing the channels etc. Any suggestions.
@xonedjofficial
5 жыл бұрын
Hi Scott, Thanks for the message. Audacity utilises the computer built in sound drivers, for Mac this core Audio and PC it’s direct sound/MME. The 96 soundcard on Mac is core audio class compliant, you will therefore have full access to the 96 I/O in the software preferences menu. If using PC, then you would have installed 96 ASIO drivers, which audacity will not see. It will see the 96, but just like setting the device for system playback you will only be limited to the first 2 USB channels in and out. For PC platforms we would recommend using software that has enabled use of ASIO drivers. Best regards, Luke
@davidmarshall5665
3 жыл бұрын
Does this mixer work with serato?
@xonedjofficial
3 жыл бұрын
Hi David, Thanks for the message. I'm afraid the short answer is no. The only Xone products supported on Serato are Xone:DB4, DB2 & 43C. Please check the Serato website for all supported hardware. serato.com/dj/hardware?type=controller&dvs=dvs-ready Best regards, Luke
Пікірлер: 228