You guys really are the best! In terms of concise/accurate/helpful videos😊, no one does it better. Thanks so much!!!
@VelfCreations
Ай бұрын
Thank you so much! We really appreciate the kind words! Glad you like our videos!
@PoppysWorkshop
8 ай бұрын
Perfect timing for this video! I’ve had my F1 for about a week now and first tried out the rotary last night. I wasn’t happy about having to prop up one end of the chuck to engrave on a tapered glass. I was watching this video while laser engraving a tapered beer glass this evening and went straight to xTool’s site to order it.
@VelfCreations
8 ай бұрын
Awesome! Glad we could share with you!
@jamiekitto7778
8 ай бұрын
Now I know what to use my Xtool points for! Thanks for pointing this review.
@VelfCreations
8 ай бұрын
Glad it was helpful!
@PoppysWorkshop
8 ай бұрын
Exactly what I did.
@Alexanderiii
8 ай бұрын
This new accessory looks so useful! I can't wait for when it will be available in the UK xTool website.
@photoshopman1972
8 ай бұрын
Looks like a nice bit of kit however when I placed my rotary sans new attachment on the left hand side, the image/design was flipped around! So how did you account for this? Did you mirror the design before hand?
@VelfCreations
8 ай бұрын
Hi 👋 You would want to put it in the left to do the inside of the ring or else it will be reversed. If you want to keep the rotary on the left for everything else then yeah you would have to flip the image. Or put the rotary on the right side of the f1. Hope that clears it up!
@photoshopman1972
8 ай бұрын
It does. Found out about the reversal thing the hard way. Good to know about the inside of objects part. Thanks!
@jackhaen
2 ай бұрын
Received the accessory kit yesterdan and installed it today - following this video. All went well but the rotary has some "slop" up and down. is that normal?
@FoiledDuck
8 ай бұрын
So upset I missed out on it. Sold out so fast
@PoppysWorkshop
8 ай бұрын
It still shows as in stock when I view the link provided in the description (Dec 8, 2023).
@FoiledDuck
8 ай бұрын
@@PoppysWorkshop yeah mine shows out of stock, i check almost every day
@KevinGoosie
8 ай бұрын
The alignment brckets seem pretty thick in the video. Are they not thick enough if the rotary is sitting on the base plate of the F1 to hold it in place or at least be able to position it?
@VelfCreations
8 ай бұрын
Hmm 🤔 That is an excellent point! We will try it tomorrow and let you know!
@floridalove1
7 ай бұрын
@@VelfCreations And what is the answer to the question posed? ... "tomorrow" was 3 weeks ago 🤔
@VelfCreations
7 ай бұрын
@@floridalove1 😂 We gave it a try and unfortunately it doesn’t work, the base of the F1 is a bit too high.
@floridalove1
7 ай бұрын
@@VelfCreations 😂 Thank you for your quick answer. I received my kit today. I haven't assembled my RA2 yet because I wanted to wait until the Accessory Kit is here. Can you tell me where I can find a video on assembling the RA2 Pro?
@VelfCreations
7 ай бұрын
@@floridalove1We don’t have one on the RA2 pro setup but this guy does a good job going through the setup kzitem.info/news/bejne/tJtovJiwa5-pdqQsi=ArYmP-PINECTHGf9
@ammoush82
6 ай бұрын
Great video! Thank you ! Random question, do metal rust after you laser engrave them?
@VelfCreations
6 ай бұрын
Nope, we use all metals that won’t rust, stainless, aluminum, silver stuff like that. I’m sure if you engrave some sort of iron it might rust and you would have to put a coating on it to protect it. Hope that helps
@sylvanyeroh7251
8 ай бұрын
Thank you for another great studio. Awaiting the arrival of mine any day now. QUESTION: Are you using glass ornaments which are hard to find these days -- I can only find plastic ones? Ms "Sam" in TN
@VelfCreations
8 ай бұрын
Thank you! Yeah we use glass ornaments, we had a lot of success with ones that can be found at Michael’s. If you have one near you they have packs of 8 for about $5
@sylvanyeroh7251
8 ай бұрын
Thank you so much.
@schnerf
7 ай бұрын
Why did you position the RA2 on the left side, and is there anything special you need to do in XCS so it doesn’t engrave backwards?
@VelfCreations
7 ай бұрын
When you do the inside of the ring, putting it on the left side produces the correct engraving. If you do it on the right side the engraving will be flipped. It also helps you get closer to the center of the work area with rings. For the tumbler since the engraving is on the outside, you have to mirror the design. Hope that helps!
@CHCLbyLen
Ай бұрын
Is there any chance you can use this from the right side?
@VelfCreations
Ай бұрын
You you can, but the motor gets in the way for smaller things like rings so it needs to be flipped to the other side.
@danielpowell9791
7 ай бұрын
Could you do some ring videos?
@VelfCreations
7 ай бұрын
Sure thing! We will put it on our list. Anything specific that you would like to see with rings so we can include that?
@danielpowell9791
7 ай бұрын
@@VelfCreations How specific can you do on the outside and inside to engrave. I have seen a little on the outside of people being able to do the whole outside to give it a wood look or the "one ring" from LOTR. But not much on the inside. Would love to see the full potential of the RA2 Pro and the F1 on rings
@believingintheblood8540
8 ай бұрын
Did the winner of the contest get chosen?
@VelfCreations
8 ай бұрын
We posted yesterday that a winner has been chosen but they have 48 hours to respond or we will have to re-draw. So nothing official yet
Пікірлер: 35