Welcome back for a test with high power and… large tools!
Today we take the field with the well-known John Deere 9620RX, 620 horsepower and 670 with IPM, the intelligent power management that gives the possibility to the impressive 15L Cummins engine with 6 cylinders in line to unleash 50hp more that make this machine unstoppable .
But today we are not here to see the well-tested 9RX, but to exclusively film the first Väderstad Carrier 925 in Italy, which has just landed on the Ca 'Corniani estate. This machine boasts a width of 9.25m, equipped with 72 discs that allow tillage of about 5-10cm deep. In today's test it is equipped "only" with heavy spirit levels after the discs instead of the "CrossCutter Knife" roller at the front, which would carry out an overly aggressive action on the ground given the absence of crops to finish or important crop residues to shred. In the central part we have the 470mm dschi for an intense working of the soil, while at the rear, for the re-consolidation of the soil we have the characteristic SteelRunner roller by Vaderstd.
The combination of all these bodies brings the Carrier to weigh 100 quintals, for a total machine + tool of about 350 quintals.
The choice of this tool by Ca 'Corniani lies in the continuous search to be increasingly respectful of the environment and the land. In fact, at an operating speed of 18 km / h (the maximum for this tool) and a width of 9 meters there is an impressive productivity in terms of hectares / hour worked, in about 24 hours it worked 140 hectares and there is also an important reduction of fuel consumption, in fact by comparing this 9 meter tool with a 6 meter one at the end of the day we have spent less time doing the work but we have also saved fuel by making fewer passes in the field.
Негізгі бет Автокөліктер мен көлік құралдары XXL DISC HARROW IN ITALY | John Deere 9620RX + Vaderstad Carrier 925 | Ca' Corniani & Genagricola
Пікірлер: 9