Exactly the info I needed without unnecessary rambling. Thank you!!!
@grumpybollox7949
2 жыл бұрын
thanks man
@karenminichino6715
Жыл бұрын
Thank you! Great info... I successfully programmed bank #1 but when I try to add a freq to Bank 2, a message appears to "reg bank". Can you please explain how to register banks? Again, thank you for the great video!
@MONNIEHOLT
6 жыл бұрын
I have this radio, thank you for taking time to show some of the features, it’s a great radio, The fusion feature truly amazes me how I’m able to talk to people all over the world with it, I also use it as my mobile with a browning BR 180 antenna, take care, 73s
@JoeDauen
6 жыл бұрын
Monnie Holt Glad to help, I use this HT to get into my wires x node and like you I'm amazed by this new technology... I can't imagine what they will come up with next! 73 to you and yours.. ke0mje
@GavinNZ
6 жыл бұрын
Thanks for the video, helpful; beats reading the manual. ZL3GAV
@yoerim360
6 жыл бұрын
programmed it with the pc ( after the crazy old way of buttons up and down and all around) , seems there must be also and odd procedure ( probably wasting 10 minutes or so touching almost all the buttons ) before beeing able to get it in the programmed channels
@AEMHI1
4 жыл бұрын
How do you select multiple memory banks to be scanned (from the keypad)?
@JoeDauen
4 жыл бұрын
in memory mode (normal memory mode, not memory bank) select a random memory, press and hold V/M key. "F" blinks in display. Rotate the dial to a bank that you don't have memories registered to. Press the V/M key to save. Now, while in memory mode, pressing "band" switches between all memories and memory bank mode. Memory mode displays "memory" for a moment, memory bank mode will display the "bank number/name" for a moment. In memory bank mode, press "F" then "band", now use the knob to select what bank you want, then press "band". Pressing "F" then "scan will scan just the bank previously selected or select all to scan all banks.
@AEMHI1
4 жыл бұрын
@@JoeDauen I am missing a step on selecting / linking the second and third memory bank for scanning. No problem selecting the first bank. Store random channel to unused bank. Bank to select Memory Bank mode F, bank, select first bank Repeating F,bank, select second bank only results in second bank scanning. All assistance is appreciated. Abe
@JoeDauen
4 жыл бұрын
@@AEMHI1 How are you programming the radio because that is a common problem when programming through either chirp or ADM.. RT system fixes that problem but unfortunately that is paid software, let me reset mine and play with it to see if I encounter the same problem and I will get back with you.
@gregmeola9012
6 жыл бұрын
Thank you! 73 kd2mbf
@kennethsawyer1497
5 жыл бұрын
I have all of my local repeated programmed my issue is how do I get out of the memory bank I can’t input a freq it just takes me to what ever number in the bank. I can’t do simplex
@JoeDauen
5 жыл бұрын
When your in the memory bank you will hit the band to get back into memory mode and from memory mode you would hit V/M which puts you into vfo so you can enter any frequency, that's if I'm understanding your question right.. ke0mje 73
@repairfreak
5 жыл бұрын
Used Yaesu software and checkboxed bank 1 for all the frequencies I wanted to add to bank one. Now how do I get to bank one to scan these frequencies? When I press band key radio says NO BANK. I also when on one of the programmed in channel numbers and I long press VM and rotate, I don’t see BAND 1,2,3, etc. for manually saving. Whats up with this? Thanks anyone
@texasredstotaloutdoors9818
5 жыл бұрын
How do you put in the pl tone? I can put a frequency in and set it to a channel I just don't know how to find the pl tone PL tone setting
@JoeDauen
5 жыл бұрын
Here's a video on that question! 73 kzitem.info/news/bejne/lKqA0n5jrZ6fjY4
@marcrobyn4844
3 жыл бұрын
I am so new to this I do not even have my license. I am scheduled for the text in February. Until then I have purchased the Yaesu FT70D and along with the RT Systems Software. I am working my way around that. I have semi figured out how to get to the banks by I can not see what freqs are in the banks. Can you explain?
@kg6blq777
4 жыл бұрын
Hi: I have the Yaesu FT70D. I want to program thus radio using the specific software, but avery time that I connect the data cable I have this message "" INVALID COM SETTING"" How can I solve this issue? Thanks
@@kg6blq777 Follow these steps and see if that is all correct.. I'll do a little more research and talk to a few people see what else I can come up with.
@kg6blq777
4 жыл бұрын
Thank you so much
@handloadedtaco6918
4 жыл бұрын
Nice intro
@stevenposson687
6 жыл бұрын
Thanks for the tips. KM6OND
@JoeDauen
6 жыл бұрын
Steven Posson Always happy to help. Hope you have a safe and happy holiday! ke0mje 73
@biologistjim4905
6 жыл бұрын
Do you know if programming memory banks for the FT-60 is the same?
@JoeDauen
6 жыл бұрын
biologistjim I believe so but I'm not 100% sure on that, from what I've seen and heard it should be though.. 73
@biologistjim4905
6 жыл бұрын
JDauen KE0MJE thanks Jim kj6vvm
@jbx907
4 жыл бұрын
Im looking for how to do odd split. I dont see any on youtube, splits that the offset cant do. Or programing a vhf rx and uhf tx with using offset
@JoeDauen
4 жыл бұрын
I think I understand what your talking about but this radio doesn't do cross band, if your looking to tx on vhf and rx on uhf or vise versa you would have to purchase a radio with cross band. The offset in this particular radio can only go so far up or down the selected band. Sorry I couldn't be more help! 73
@N4DJC
4 жыл бұрын
It will do odd splits on vhf/uhf. Program RX freq first with tone if needed, then input TX freq on VFO, write to the same memory (turn the dial to pick the same memory) while pushing the PTT. The RX frequency must have the tone (standard procedure for Yaesu) so don’t get confused and try to program the tone with the TX freq.
@jbx907
4 жыл бұрын
@@N4DJC ok so the 2nd time you memory the tx freq press ptt while enteringt the memory, thanks man 73, great help
@N4DJC
4 жыл бұрын
James Balagtas push V/M while pushing PTT, it’s a whole lot easier to set up using the Yaesu software though. The FT-70DR is a good radio. The battery life isn’t great, but if set it to FM only when not using Fusion, it lasts a lot longer. Digital uses a lot of power even when the radio is off. Take the battery out if you’re not going to use it for a day or so. It sounds better than the 3DR and the display is easier to read in bright light conditions.
@jbx907
4 жыл бұрын
@@N4DJC thankyou very much
@rocky12364
4 жыл бұрын
Hi Joe , Can you do a program video , and add names to it to please .
@JoeDauen
4 жыл бұрын
I'm sure I can slap something together for you after the holiday, are you referring to programming memory banks or just programming the radio in general? I have a program video on my channel which includes names if that's what you needed.. 73 Happy Holidays!
@TheFremenChick
4 жыл бұрын
Thank you!
@MrAt106
5 жыл бұрын
Hi my only regret is the battery the charge dont last 8 hours even without tx just standing by
@JoeDauen
5 жыл бұрын
I would agree, the battery life could definitely be better!
@josephvandyke2150
5 жыл бұрын
Does this radio not have an SD card?
@JoeDauen
5 жыл бұрын
No SD card slot only internal memory.. 73
@DavidHenderson227
5 жыл бұрын
May I suggest you spend some time familiarizing yourself with the radio because this video is very confusing.
@JoeDauen
5 жыл бұрын
I'm not sure what is confusing about the video and or programming it in general. I've had many many thanks from this video but I appreciate you stopping by and sharing your opinion.. 73 to you and yours! Ke0mje
@jameswendellmiller
6 жыл бұрын
I have the banks setup from the computer, but I cannot figure out how to switch between banks :( google not helping and the manual doesn't work ......
@JoeDauen
6 жыл бұрын
Jimbo M I'm working right now so I'm not right next to the radio but I believe you just hit ( band ) to switch through the banks. If that doesn't work, try to program one by hand by following this video, in say bank 2 and see if the ones you programmed from the software are stored. I'll double check when I get back to the house.. 73
@jameswendellmiller
6 жыл бұрын
JDauen KE0MJE I must be doing something dumb...... I have the banks checked on the pc..... But band will only take me into bank 5.
@ahmadrafiq967
6 жыл бұрын
I'm also having the same problem. Does anyone found the solution?
@JoeDauen
6 жыл бұрын
@@ahmadrafiq967 unfortunately I've always just programmed them manually. I should be back home tomorrow and I'll take a look at the program and or make a few phone calls to see what I can come up with.. 73
@billcurtis7240
5 жыл бұрын
Same problem, loaded memory banks via Chirp 20190412 Mac and when I press VM it double bleeps error ?
@yellowlightning98
6 жыл бұрын
How do you perform the new 1.10 FT70DR firmware update ???
@JoeDauen
6 жыл бұрын
Richard Hartford Its a slow and painful process in my opinion, first you have to download the new firmware from Yaesu and do a step by step install following the instructions to the letter or you will brick the radio and have to ship it in for repair. If you just goto Yaesu and download it, there is instructions on how to that you can view before trying anything. I will be trying to make a video with step by step instructions hopefully within the next month! Good Luck 73 ke0mje
Пікірлер: 54