I believe this unit will appeal to a lot of home studio owners who may be looking to go mobile and or downsize without giving up much functionality. DM3’s a bit pricey, but given the unit’s feature set some might consider it a real bargain. With this, I wanted to share this information with anyone interested in hopes that it serves useful.
@cdwizzerd
Жыл бұрын
dude you are so knowledgeable. feel like I'm back at university watching your videos 😊
@racesla
Жыл бұрын
Thanks for the review. Really wanted to love this mixer, but for live sound I think it's a bit limited. Only having 2 FX buses, also the limited number of aux outs, especially when you compare it to their TF1. More FX engines could be added later with firmware updates.
@PowercoatMusic
Жыл бұрын
Thanks for watching and sharing.
@Enonymouse_
Жыл бұрын
I am torn between this model and the heath & allen SQ-5 for live & home studio mix tasks. I wouldn't use the onboard DAW as its too limited, that's a common problem for many budget mixers i've read.
@tharishperera873
6 ай бұрын
Can we switch off from the mixer without using the power switch?
@velocityacoustics
10 ай бұрын
can you disable the green ethernet function? Dante spefcifies always disabling it
@thecoastCoverband
Жыл бұрын
Thanks for your reply. I mean can I use this mixer to flip through to 23 or more tracks in cubase
@kevinfeeley8406
Жыл бұрын
Can I connect a Wifi router and remote control via an iPad? Is there an app to allow this? Is there software that will allow me to preprogram a scene and load vis USB?
@PowercoatMusic
Жыл бұрын
DM3 Editor and DM3 series console connect via a network connection. A DM3 series console and DM3 Editor can connect to each other if they are connected to the same network. Thanks for watching.
@steventrieu17
Жыл бұрын
@@PowercoatMusic but still need to plug in the router. No WiFi built in am i correct?.
@thecoastCoverband
Жыл бұрын
Hi if I want to use the Dm3 as a controller with Cubase,can I control more than 16 channels?
@PowercoatMusic
Жыл бұрын
Using a USB Type B Connector, the unit functions as an up to 18 IN/18 OUT, 96 kHz/32 bit audio interface by connecting to a PC via USB cables. Installing Yamaha Steinberg USB Driver is required for communications with a PC. Check the Cubase manual for additional configurations using control surfaces. Thanks for watching.
@thecoastCoverband
Жыл бұрын
@@PowercoatMusic Thanks for your reply. I mean can I use this mixer to flip through to 23 or more tracks in cubase
@digitaldiezel5870
Жыл бұрын
Will this work as an interface when connected to the Akai Force?
@PowercoatMusic
Жыл бұрын
If a driver or plugin is available, it should work. However, I have not yet seen one. I suggest contacting Yamaha support for more information on this specific topic. Thanks for watching.
@steventrieu17
Жыл бұрын
I just received my DM3, disappointing me no Wi-Fi connection. You have to plug in the modem at home to connect wifi at home. ok, but when you carry out for sure no router for you to plug in the mixer .I have been using the QSC touch mix very easy have Wifi connect ready to use, no need to plug in the router .Maybe have to return the mixer .
@PowercoatMusic
Жыл бұрын
Thanks for watching and sharing. It's appreciated.
@mowomedia4801
Жыл бұрын
Yamaha adding a wifi radio would have increased the costs and would need to add space for rear antenna too. It's better to roll your own wifi as the workflow will be different for each user. I really see the target market for this mixer is small corporate/breakout room and small churches.
@Enonymouse_
Жыл бұрын
@@mowomedia4801 WiFi standards are constantly changing, it would be silly to add something that will be outdated in 12 months. WiFi 5 is on its way out, WiFi 6 & 6E are slowly being adopted (but newer standards are currently being worked on as I type this). The snails pace at which the industry has been adopting tech in a beneficial way, I will likely fade from this world of old age before I see them put in timely useful tech in a way that isn't broken or half-a$$ed.
@kosmikmusa
Жыл бұрын
I wonder what that built in ethernet connection is for..?
@axelmartinez670
Жыл бұрын
dante
@kosmikmusa
Жыл бұрын
@@axelmartinez670 No. There is a Dante connection and then there is built in ethernet connection. What is it for?
@axelmartinez670
Жыл бұрын
@@kosmikmusa probably a wifi router for tablet control
@PowercoatMusic
Жыл бұрын
Yamaha says it's for a direct connection to a PC using Ethernet. You could also possibly connect it to a router/switch and access it that way.
@steventrieu17
Жыл бұрын
No Ethernet build in. Make me have to return a mixer..
Пікірлер: 27