Best solution i've seen. You get the best of both worlds!
@LifeWithStiel
Жыл бұрын
Thinking of doing this on my grom
@ballamoto
3 жыл бұрын
Hi! Any particular reason you cut the grey wire? I'm guessing it is a closed circuit between the abs sensor and the ABS ECU box. So does it matter which cable you connect the switch to?
@eliastzirakis585
3 жыл бұрын
That's right. It doesn't matter.
@ballamoto
3 жыл бұрын
@@eliastzirakis585 thanks for the quick answer 👍
@lydtv6270
2 жыл бұрын
Oh nice skill abs senser wire install
@ToastyMeadows
3 жыл бұрын
Can I trace the rear abs wire instead of front to only turn off the rear and have the front abs functional? Or is the system all or nothing?
@eliastzirakis585
3 жыл бұрын
All or nothing as you say.
@jonyo4808
Жыл бұрын
Question… Hope you still respond to comments What amp rating should the switch be?
@eliastzirakis585
Жыл бұрын
Any type of switch can work. This wire is carrying analogue signal data to abs so it not a high amper line.
@jonyo4808
Жыл бұрын
@@eliastzirakis585 thanks 🙏🏼 you the man 🫡
@DanielBoss26
Жыл бұрын
When is "on" the Led on display is "on" too? Or off?
@eliastzirakis585
Жыл бұрын
When the abs is as normal the abs light must be off.. You can't deactivate and activate as you ride. If you deactivate abs then you must restart your bike in order abs to work again. If the abs light is on this means that the abs is not working
@RickSanchezdimension_
Жыл бұрын
Is the switch waterproof or can it cause problems in the rain or when cleaning?
@eliastzirakis585
Жыл бұрын
The specific switch it Supposed to be waterproof. Also the specific switch I don't think is waterproof 😁 and it's working fine
@RickSanchezdimension_
Жыл бұрын
@@eliastzirakis585 Ok, thanks for the reply👍
@taylornix920
3 жыл бұрын
Once you do this can you bleed the system and mount brake lines directly from master to caliper? if you have the correct lines. Not the abs lines
@eliastzirakis585
3 жыл бұрын
This abs mod referring only to electric wiring on the front Sensor . Not on the hydraulic system!
@dertonmann4095
Жыл бұрын
Do you have a link where you bought that switch ?
@eliastzirakis585
Жыл бұрын
It's a common on-off switch don't worry you can find it anywhere. I buy it for 4€ from a local store. Also if you prefer you can use a normal close (nc) button
@dertonmann4095
Жыл бұрын
@@eliastzirakis585 OK thank you for the quick answer 👍🏼
@florian8714
Жыл бұрын
Do u have to restart the bike do get the abs work again after actuate the switch?
@eliastzirakis585
Жыл бұрын
Yeap. You can do it also while you driving if you don't want to stop 😁
@florian8714
Жыл бұрын
@@eliastzirakis585 do you have a link for the switch on the handlebar?
@eliastzirakis585
Жыл бұрын
@@florian8714 sory no. Its a common on off switch. You can find it anywhere.
@florian8714
Жыл бұрын
@@eliastzirakis585 thanks mate
@HawkEyeMonkey
4 жыл бұрын
Very nice
@andresmarcano9662
3 жыл бұрын
I just did this with the help of your video but it doesn't turn back on. Any help?
@eliastzirakis585
3 жыл бұрын
You have to turn the abs switch back to normal. switch off the key and restart the bike. That's how it works. You can turn of the abs while you ride but not the opposite. If it always off then you have to check the wires connections. Rollback check if the abs works and start checking
@antonstagge6824
3 жыл бұрын
Did you get it to work?
@bigchris24k
4 жыл бұрын
which wires on the switch go to the connection? What did you do with that green wire?
@eliastzirakis585
4 жыл бұрын
You must cut the grey wire from the abs sensor. Then you just connect the two wires from your switch to the the grey wire. It's so simple. A serial switch. Please if you can't manage to connect a simple switch to a wire don't do it.
@bigchris24k
4 жыл бұрын
Elias Tzirakis thanks for the quick reply, it makes sense now!
@darylharris9650
2 жыл бұрын
Hi, does this affect the speedo when ABS is switched off
@eliastzirakis585
2 жыл бұрын
No. Speedometer link with rear sensor.
@demon817
3 жыл бұрын
What year MT07's does this work on ?
@eliastzirakis585
3 жыл бұрын
All mt07 series until now have the same wiring
@WorldzMo5t3pic
Жыл бұрын
Kind of a bummer that you have to turn the bike off then back on to REactivate the ABS.
@eliastzirakis585
Жыл бұрын
I have a solution for you.. Buy a ktm! 🤣
@michalczajkowski8798
3 жыл бұрын
this switch disables front and rear abs ?
@eliastzirakis585
3 жыл бұрын
Yes. No abs at all. Like real bikes 😁
@michalczajkowski8798
2 жыл бұрын
@@eliastzirakis585 it works ! 😍 I used yamaha connectors and pluged the switch to the original abs cable so i didnt have to cut anything :)
@eliastzirakis585
2 жыл бұрын
@@michalczajkowski8798 nice work!
@Freddy0275
Жыл бұрын
@@michalczajkowski8798 Do you have a link for the yamaha connectors, do not want to cut my cables either?
3 жыл бұрын
Rear ABS is working ?
@eliastzirakis585
3 жыл бұрын
No abs at all. Just the all days
@gordonwheeler6630
5 ай бұрын
Y not take the fuel out then you can put it back 🤪
@eliastzirakis585
5 ай бұрын
Why you not put out your stomach when not hungry 😂😂😂
Пікірлер: 52