Very informative! The manual doesn't say to remove the handles to remove the nose cone. I was pulling and wedging a knife to pry it open. As a last resort I you tubed you! Thank you
@WileHeCoyote
3 жыл бұрын
My guess would be vibration dampening
@ColeGartner
3 жыл бұрын
Hi there , Any idea how to keep it from leaking? Thanks
@Matty2220
4 жыл бұрын
Thank you for the video I learned a lot from it. How long the engine works When the battery is full? is it two hours As it is written in an operating book ? I also wanted to ask if there are any other Scooter models you recommend?
@nothroughroad3841
Жыл бұрын
You fkn legend. I'm at the beach, first time. No key!
@prophotoservices
Жыл бұрын
Thank you!!!!!
@acem7749
3 ай бұрын
I just called a shop online that said Sea Doo, Yamaha, and Nautica are all the same just branding changes.
@chriskar2189
3 жыл бұрын
does it go fast????
@Fabius2020
2 жыл бұрын
Hi, thanks for your video! I have a seascooter rds 300 with a problem and I open that you can give me some advice: a little water enters the battery compartment, I cleaned the edges and then I lubricated as per the manual, but the problem remained, in your opinion how can i solve this problem? Thank you and good day. Sincerely
@bennadin3566
3 жыл бұрын
Very helpful thank you!
@CardinalHijack
4 жыл бұрын
Do you know how this compares to the RDS 280?
@richieparrish7101
3 жыл бұрын
HAVE YOU GONE ANY FARTHER INTO DISSASEMBLY YET? IM TRYING TO FULLY DISSASEMBLE THE RDS250 I HAVE TO TRY AND FIND WHY ITS NOT WORKING AND I CANT FIND ANYTHING?! IVE GOT THE COWL, HANDLE PROPELLER AND BATTERY OUT ANTHE SCREWS FROM THE BATTERY TRAY OUT BUT CANT GET ANY FARTHER IN THE DISSASEMBLY PROCESS??
@walter091571
4 жыл бұрын
Need Help ! How i can Open the Battery and fixed ? I used once its not charging any more . Please !
@projectile8228
4 жыл бұрын
Battery needs to be charged every night to keep it working
@walter091571
4 жыл бұрын
Jordan Jones I don’t understand you point . Jordan the battery right now is not charging. But its brand new I used once ! So my cuestión es how I can fixed ?
@projectile8228
4 жыл бұрын
@@walter091571 is it the battery that's dead or the scooter? the battery has certain conditions which need to be met to sustain the functionality of it! Do you even read the instructions?
@claudiof.barbano5530
2 жыл бұрын
Is it a good sea scooter, any better recomendations?
@robertcoxon9268
4 жыл бұрын
Good job
@vwdiver512
4 жыл бұрын
Thanks!
@katiedavis301
4 жыл бұрын
My on/off switch fell off at some point and I couldn't find it. Any suggestions on how to purchase a new one? Is it an easy replacement? Thanks!
@kodiererg
3 жыл бұрын
3d print one
@themainediverschannel4495
3 жыл бұрын
I was going to purchase this exact scooter but came across bad reviews about its battery not having a long life or will not charge at all after 1 to several uses. What are your thoughts/comments on these bad reviews about this item having battery problems on keeping a charge pr not being able to charge at all after a single use?
@jesse851
5 жыл бұрын
My ON/OFF switch broke completely off before I ever got to use it. I am so pissed off that they would make such a cheap piece of crap
@vwdiver512
4 жыл бұрын
Agreed... but it was a fairly easy fix. I think they should have made that switch more durable
@timothylaychak3792
4 жыл бұрын
@@vwdiver512 should of read the instructions first
@joshstrong2014
Жыл бұрын
What was the easy fix ?
@Donorcyclist
3 жыл бұрын
They buoyancy chamber is designed to also flood with water so you shouldn't need weights.
@kodiererg
3 жыл бұрын
super glue the switch?
@allusa2009
5 жыл бұрын
if you purchased it brand new then there should be no foam around the prop casing. Then if got it second hand or used, the previous owner would have put it in there himself, for buoyancy/noise/vibration purposes. Manufacturers will never put a tackless foam with a masking tape in it.
@razzlopez5986
5 жыл бұрын
Actually they all come with foam for buoyancy. That is factory made.
@richieparrish7101
3 жыл бұрын
ACTUALLY I HAVE ONE TOO GOT BRAND NEW AND ITS GOT THE EXACT SAME FOAM PIECES SAME SIZE SAME TAPE ITS DEFINITELY FROM FACTORY
@09ironman1
2 жыл бұрын
You recommend this.
@colestephan177
4 жыл бұрын
Maybe to not scratch the inside but I’m not sure
@Goearthtour
3 жыл бұрын
Aft ballast so it rides level in the water.
@edgarramos1344
2 жыл бұрын
How do you charge the battery?
@vwdiver512
2 жыл бұрын
Hi Edgar - you can remove the battery and it comes with an external charger
@paulrobbins7628
3 жыл бұрын
Any evidence the electric discharge from the motor could attract sharks?
@DEVINE.IMAGE.
3 жыл бұрын
Whats the difference to having a dive torch or camera filming them
@ibtm
Жыл бұрын
Definiely there for flotation!!!!
@burakkosar5172
3 жыл бұрын
I wonder, can I use several batteries in a row on the same day? Does using multiple on the same day break the machine?
@pauloyoshizaki2103
3 жыл бұрын
YAMAHA ; ROBO - SEA ; RBS 250 ; RBS 300 ; MERGULHO MOTOR ELÉTRICO ; MUITO EFICIENTE !!! GOSTEI !!! NOVA AVENTURA NO FUNDO DO MAR !!! ; NOVO MEIO DE EXPLORAR FUNDO DO MAR !!!! PESCA !!!! 😲😲😲😄😀😄😀😄😀😃😃😃😃😃😃😃😃😃😃😃😃😃👏👏👏👏👏👏👏👏👏👏👏👏👏
@pilotactor777
3 жыл бұрын
Those floats in the prop casing were definately a " home job". I imagine for antivibration.
@hshsgjakanss
3 жыл бұрын
OR.....its for positive buoyancy and has been done in a very cheap way. These are NOT Yamaha made. These are chinese junk with Yamaha sticker on it. Just got off the phone with my local Yamaha Dealer. They can be nice, but battery needs to be charged after every use. Every single use.
@richieparrish7101
3 жыл бұрын
NOT A HOME JOB MINE HAS THE SAME THING INSIDE GOT IT NEW IN THE BOX DEFINITELY LOOKS HOMEMADE BUT ITS ORIGINAL
Пікірлер: 46