Pulled a Tascam DA-30 out of a dumpster in the box! Don't know if you want it, or parts from it. Just had to ask you about it since you seem to like them. Shipping the whole thing to Canada may be cost prohibitive. Let me know what parts you want from it, or the whole thing, otherwise it is getting recycled.
@12voltvids
Жыл бұрын
The entire thing would be great as i have one here that has issues a donor may get this one going. Believe it has a main board issue.
@zulumax1
Жыл бұрын
@@12voltvids Have to contact you tomorrow through email tomorrow. Got to get some sleep. I will throw in some unopened DAT tapes as well.
@Barbarapape
Жыл бұрын
These compact systems seem to be prone to these sort of failures as they age. I have a Teac system that i collected over the years, the tuner section went AWOL a few years ago, so i just use another tuner rather than try to source spare parts.
@12voltvids
Жыл бұрын
Face it, mini systems were cheap. They were not designed to last
@ShadowsOnTheScreen
Жыл бұрын
Thank you for the video. I learn at least one thing new with each one.
@minty_Joe
Жыл бұрын
We used to have a model very similar to this. It certainly looks identical. It was purchased by my grandma in 1993 to replace an old Panasonic AM/FM, Turntable and 8-Track recorder AIO... with Thrustmaster speakers! The Yamaha was a great unit, until the display stopped working. The rest of it functioned fine, but I never could figure out why the LCD just quit. It then bit the dust altogether a few years ago.
@12voltvids
Жыл бұрын
The display is lit by an incandescent bulb that will burn out. This was was replaced, by me at the shop many moons ago. The new one is still going and it works on CD only now.
@minty_Joe
Жыл бұрын
@@12voltvids One thing I found interesting on the Yamaha. If you shorted the speaker wires on one channel (disconnect the wires from the back of the speaker cabinet and touched the wires together), you'd get a brief spark and the protection would kick in (obviously). You'd have to turn off/turn on again power to get it back to normal. It made me wonder how much voltage was running through each channel. Knowing now, if I still had it, I wouldn't try running without speakers connected.
@Luke-san
Жыл бұрын
You can't win 'm all. To bad, looked like a fine above average made compact system. I have several things here that I was going to look at more in depth to fix them. These have been here for years and will probably never get fixed. They only seem to take up space for now.
@12voltvids
Жыл бұрын
Owner had a 40 limit to change the belt. Didn't care if it displayed aux, as long as the CD time displays. Only uses as CD and aux for his computer sound. That's it. Doesn't use cassette and doesn't own a turntable and he is a musician. Studio musician with lots of toys in his home studio. Had a full cubase system. Gave me his old stuff to unload including a tascam da30.
@andrewspode
Жыл бұрын
Glad I'm not the only one that has a dental pick in his toolkit! Hope your cat is doing okay?
@12voltvids
Жыл бұрын
He is hanging in there. I don't know if the treatment is helping or not but i have spent more then I would like to admit. Vets are a bloody shake down. Every time you turn around they want another 500 bucks or 1,000 bucks.
@EastAngliaUK
Жыл бұрын
could it be run with the display not plugged in prob best way to have it? though the radio would be a bit hard to use but with auto scan it would find the station.
@MrGasS
Жыл бұрын
4:07 best ringtone ever
@12voltvids
Жыл бұрын
Text message alert.
@MrGasS
Жыл бұрын
@@12voltvids can I ask you a question about a Sony CCD-FX700E Hi8 camcorder? Thank you :)
@ford1546
Жыл бұрын
Hello. How is the UNI-T oscilloscope to use? It's a CHEAP oscilloscope! I once considered buying one, but after reading a bit about them on the internet, I get the impression that they are a bit out of date, old-fashioned by today's standards.
@12voltvids
Жыл бұрын
It's a piece of sshit. One of my poorer decisions that the store wouldn't take back. As soon as i tried it i realized i had made a mistake.
@stphinkle
Жыл бұрын
I wonder if the CD and Radio are sending he display signal from two different chips, which would explain why it is working for the CD and not the radio. I wonder if there is some kind of input select path to the display that is controlled by the main board. Perhaps the chip that switches inputs to the display is going bad or has some connection issues?
@12voltvids
Жыл бұрын
I am sure they are. They would both be on an i2c bus and connected in parallel. The display shows whatever it receives till the next packet. CD player kicks out correct data and display works. Switch to say phono or aux or radio and the chip on the amp isn't sending correct data and the display just shows the last data from CD that was there.
@brentnearhood8874
Жыл бұрын
Thanks!
@robertdavis5714
Жыл бұрын
Enjoyed watching this Junk. I hope he got this for $5.00 at a garage sale.
@12voltvids
Жыл бұрын
He bought it new and paid me to fix it.
@AnilKumar-rt1vs
Жыл бұрын
Respected sir, I am an Indian self employed technician I wanna ask how can ossciloscope can be used in weight machine servicing. Hope you answer.
@adambennett1098
Жыл бұрын
how do i contact you for a repair
@Limousine08
Жыл бұрын
I can tell you right now the display is cold solder joints on those pins along the top of the display, I dunno why you didn't even look at them
@09danstart
Жыл бұрын
it wont be dry solder joints on the display because cd is displaying.. maybe somewhere else on main board
@12voltvids
Жыл бұрын
@@09danstart correct data is being passed from CD player. That goes through main board. Could be a broken trace or cracked connection on main board but i am not going to the trouble of pulling that for less than 100 for the time involved and the owner had a limit of 40 bucks. Same reason the tape deck is not being fixed. Doesn't use it, doesn't want to spend money on it.
@Limousine08
Жыл бұрын
@@09danstart no I had the same problem, it was doing just that same thing, in fact I brought it to a repair guy who charged me 70 dollars and then handed it back to me still unfixed even though I told him what to do, I had to buy a new solder iron myself and resoldered those pins and it worked and been fine ever since..I mean why wouldn't you even try such an obvious thing
@zx8401ztv
Жыл бұрын
If he doesnt want the tape deck, maybe pull the motor and belts for a spare.
@reacey
Жыл бұрын
So jealous of your esr meter
@12voltvids
Жыл бұрын
So build one.
@reacey
Жыл бұрын
@@12voltvids doesnt seem much point when the cheapo chinese one i have does the job . Just looks like a nice thing to own
@12voltvids
Жыл бұрын
@@reacey ESR tested is one if the most important pieces of test gear you can own.
@reacey
Жыл бұрын
@@12voltvids the one i have works perfectly fine , i use it everyday almost, didnt you get yours from your old work? It doesnt look like one youd be able to buy
@12voltvids
Жыл бұрын
@@reacey I built it back when i worked at the tv shop. I paid for the kit and assembled it so when i left it left with me as did my scope, soldering iron and tools.
Пікірлер: 41