Tenori-On was actually my first App I bought for my iPad. I spent 17 Euro instead 1000 Euro for the real gear. On IPad it sounds really great because you can plug in any synth you want. Thank you for sharing Markus.
@bobbyberetta4206
8 жыл бұрын
I remember when these came out, I was impressed at the time and always wanted to pull one apart. Thank you!
@Mr.Unacceptable
8 жыл бұрын
I had to do a similar thing with a X-radar chronograph someone left in the rain then promptly turned it on. Didn't harm anything just corroded connections and shorted right away. I resoldered everything that looked like crap and put the batteries in. Lucky it works again. I used heat tape to protect the LCD. It was nasty to get all the garbage off it. I should have taken it off like you did. I feared cleaning those holes but that's a good idea. I'll probably forget by next time. lol.
@mCKENIC
8 жыл бұрын
That was FANTASTIC Markus, thank you for uploading! I have a Tenori for years and live in terror of something happening to it - great to see the inside and the desolder/clean technique. Thank you! Its a great little machine, some usable sounds and loading your own samples - it is quirky as hell though! Its strengths IMHO are playing perc sounds with the built-in presets/your own samples and sequencing external gear.
@markusfuller
8 жыл бұрын
+mCKENIC Hi Yes I have heard some amazing things that can be done on one of these but Im just not the right guy to show it off just the guy who fixes things :-)
@frac
8 жыл бұрын
Nice job. I don't think I'd have even tried that. I'd probably have chopped off the switch and put jumper wires to the nubs left over and attached new switch somewhere else. I'm going to remember your tricks. I'm sure I'll have reason to use them soon enough!
@VintageElectronicsGeek
8 жыл бұрын
A tip for desoldering, use a small beveled tip and flux, wipe the pads and your wick with flux, you will be amazed at how better your life will be! :) Just makes sure to clean the flux off the board as flux can cause issues, use Kimwipes and isopropyl alcohol to clean up with.
@SuperGeorge2112
8 жыл бұрын
you have fantastic patience Marcus.
@Advadva
8 жыл бұрын
I'm using syringe needle to clean the holes. Works good as well, but without cutting.
@davidchandler4587
8 жыл бұрын
interesting little fix.little boots uses one of these machines to good effect
@voltlog
8 жыл бұрын
All I can say is: nice wave effect implemented on those white LEDs :)
@kingpishful
8 жыл бұрын
I've got an electronic solder sucker. Its basically an iron that sucks. Best £12 I've spent.
@kingpishful
8 жыл бұрын
From CPC farnell
@joacimwennerberg8310
8 жыл бұрын
Thanks for posting! Nice cleaning tip with a resistor.
@Johnsys359
8 жыл бұрын
I've soldered and de-soldered 24 micro pin adapters on cell phones with only a temp controlled iron and wick. Kinda suprised it didn't work for this job, but using resistor wire is a good idea.
@stretchx
8 жыл бұрын
Really interesting video - as always! One thing, This didn't display in my subscriptions feed, I only found out from a KZitem email, Not sure if KZitem is having issues.
@ThomasGrillo
8 жыл бұрын
That's a fascinating little gadget. Thanks for sharing this. :)
@markusfuller
8 жыл бұрын
+ThomasGrillo Thanks Thomas.
@JeroenBaxexm
8 жыл бұрын
amazing job on the display! That was finicky for sure
@garethbull2226
8 жыл бұрын
So the Tenori-On can now also be Tenori-Off. Hooray! :)
@markusfuller
8 жыл бұрын
+Gareth Bull LOL I like it
@marctronixx
8 жыл бұрын
well done! never heard of this gadget, but cool nonetheless! cheers sir!
@edgeeffect
8 жыл бұрын
have you seen Little Boots playing this doing Meddle on Later with Jookz Holand?
@ricardlupus
8 жыл бұрын
Does the switch have to be subjected to undue force to break, or will it happen with repeated use over time? Seems several people have had problems with the switch arm breaking, so perhaps it's worth while replacing it with a more durable type?
@markusfuller
8 жыл бұрын
Hello. Im not sure how the original switch was broken. this belonged to a friend of mine so I really do not know how the old one was broken off
@robot797
8 жыл бұрын
coool gadget but i have to say your video was a little bright in this video
@markusfuller
8 жыл бұрын
+robot797 Sorry about that. I was trying a different camera out.
@robot797
8 жыл бұрын
markusfuller it was a great video
@cyprn6600
8 жыл бұрын
+markusfuller it seems like your white balance is constantly changing settings, gr8 vid otherwise
@markusfuller
8 жыл бұрын
Yes I was trying out a different video camera that hooks directly into the computer. I dont think I will be using it again.
@yevgenylebedev9927
8 жыл бұрын
Solder from small holes I was blown by mouth... P.S. Sorry for my English.
@edgeeffect
8 жыл бұрын
the tight-wad in me would tell me to use a bit of wire rather than a resistor.
@VJFranzK
7 жыл бұрын
Moral: Be careful when switching your Tenori! Is there anyone in the LA area who would attempt this kind of repair?
@BenHarner
8 жыл бұрын
Auto-exposure made it a bit hard to watch :/ great video though
@markusfuller
8 жыл бұрын
sorry about that, i was trying out a different camera.
Пікірлер: 38