I much appreciate this. Just did my 05 1100. Has had late engagement and little float. Clutch is very responsive now and actually starts to grab as I let off. I hope it lasts. I thank you for sharing
@digginohio9271
4 жыл бұрын
Awesome video, Saved me taking my bike to the mechanic.
@racenuke
7 жыл бұрын
Simple video, thank you!
@2001himax
7 жыл бұрын
Thanks Peter, Just what I need to know. Norman
@lzamora339
3 жыл бұрын
Wow straight and simple perfect. . The manual does not cover this....
@ctjmurm2923
5 жыл бұрын
excellent thanks buddy, worked a treat
@halleffect1
9 ай бұрын
I don't understand exactly what you did or why the clutch can't just be adjusted at the lever. but this does give me a starting point, thanks.
@peterpiekarski4910
9 ай бұрын
It first has to be adjusted on the bottom end then you make the final adjustment up top
@paulwojnar2291
Ай бұрын
@@peterpiekarski4910 Excellent instructive video. Harley lower clutch adjusment us exactly the same procedure.
@Sidewayz_SuperNova
5 жыл бұрын
Kickass thanks man!
@keremkara941
2 ай бұрын
Tornavida başlı vidayı tam sıkıp yarım tur geri aldın bu depriyaj oluşan bu boşlukla nasıl ayırma yapabilir bence yanlış vida tam temas ettiği yerde sabitlenmeli bence
@peterpiekarski4910
2 ай бұрын
Nope, this is how you do it
@keremkara941
2 ай бұрын
@@peterpiekarski4910 neden vidayı biraz geri alıyosun neden sebebi nedir
@crimewave4562
7 ай бұрын
Hey man I took mine apart and can not figure out how to get it back the nut does not go on fully and the cable is extremely loose
@SuperAsianDude1
7 жыл бұрын
is this the same with the 650?
@Five_on_tha
23 сағат бұрын
Why would that thing not snap back even with the spring on?
@peterpiekarski4910
22 сағат бұрын
Sounds like something inside isn’t correct. I have a parts motor if you need $200 in NY
@Five_on_tha
19 сағат бұрын
@@peterpiekarski4910 yeah had to get a replacement screw for the clutch adjustment
@dougk8103
8 жыл бұрын
thanks a bunch!
@brittanyreynolds5563
4 жыл бұрын
Hey! Thanks for this awesome video. What kind+size tools did you use here? I have no clue about tools and am still getting familiar with my bike.
@peterpiekarski4910
Жыл бұрын
All metric
@peterpiekarski4910
8 жыл бұрын
Why not try it, don't I make it look simple ?
@sammy60164
5 жыл бұрын
My buddy just picked up a 2007 650, he had me take it for a ride, noticed the clutch didn't actually grab until almost WAY released. Is this video what you do to address that issue? Kinda through me for a loop when trying to ride it (I ride a 2013 Sportster) and my "grab" area is almost immediat on the handle, and his was throwing me off big time. Really nice bike too, I told him when he gets tired of it and wants a bigger one to lket me have first offer
@peterpiekarski4910
5 жыл бұрын
No, this video is for an 1100
@TRANSPORTKING1988
2 жыл бұрын
I took my Yamaha 1100 v Star to get a state inspection when I got it back home the clutch stopped engaging, when you put it in gear it dies.... I'm not sure how much it cost to replace it but I'm shocked that I'm in this position after a state inspection
@peterpiekarski4910
2 жыл бұрын
Put your kickstand up, or fix the kickstand switch
@TRANSPORTKING1988
2 жыл бұрын
@@peterpiekarski4910 You've got to be kidding me 🥺 does having the kickstand down cause this? I'm going to my storage unit today and check it out, if this is a remedy I will buy you a 12 pack and ship it 😊
@peterpiekarski4910
2 жыл бұрын
@@TRANSPORTKING1988 stella artois
@davidbolduc-henri7790
Жыл бұрын
If i put a new clucht in i should do that? Most video they dont do it
@peterpiekarski4910
Жыл бұрын
Definitely
@kahmaararmatrading8607
8 жыл бұрын
I did this when the crankcase cover was off the motorcycle. When I reattached everything, I could not shift gears. The shift pedal felt stuck. I did not want to use excessive force to change gears.....now just looking for answers. Any thoughts on this?????
@Jdwspyder2
6 жыл бұрын
Kahmaar Armatrading ever figure this out?
@lanceditty7300
6 жыл бұрын
Start over through all the steps
@shaunnelson1360
Жыл бұрын
I think i over adjusted screw and it doesnt seem to be catching. What can i do?
@peterpiekarski4910
Жыл бұрын
Follow the video step by step
@WaterBoyFishing
3 жыл бұрын
I did exactly what you said and lost my whole clutch??
@peterpiekarski4910
3 жыл бұрын
Watch the video again and repeat, you did something wrong
@christinewerner4214
5 жыл бұрын
What happens when this doesn't work?
@ricardoespinoza9810
8 жыл бұрын
I have issues when a change shift from 3 to 4, this can be the issue?
@jamieirving1044
5 жыл бұрын
Do you know how I replaced replaced the push screw mine strips on the lower end clutch adjustment
@peterpiekarski4910
5 жыл бұрын
No
@docyoung81
6 жыл бұрын
Dose this adjustment bring the clutch plates closer together???????
@peterpiekarski7628
6 жыл бұрын
Doc Young No
@VirALPrody
4 жыл бұрын
I’m just trying to fix a clutch that’s slipping
@mikehess7687
3 жыл бұрын
I’m doing the same. My clutch just started slipping.
@xxscrewthesystemxx2562
3 жыл бұрын
@@mikehess7687 Mine only does it on hard acceleration n theirs no power to the rear wheel and just revs. I'm putting a starter in it tomorrow cause the old one is not engaging but ill probly fix the clutch later on
@mikehess7687
3 жыл бұрын
@@xxscrewthesystemxx2562 I had to replace mine. It just got worse and I didn’t want to get stuck somewhere.
@pinotz
2 жыл бұрын
@@xxscrewthesystemxx2562 my bike do that also on hard acceleration. What was your issue ? Did adjusting the lower end of the clutch cable fixed it ?
@xxscrewthesystemxx2562
2 жыл бұрын
@@pinotz I never messed with it I still ride it I just don't accelerate to its full potential.but I am gonna replace the clutch soon
@peterpiekarski4910
8 жыл бұрын
i dont think so but it cant hurt to try
@ilyam7035
6 жыл бұрын
gr8! 10x!
@zacharydutton6315
7 жыл бұрын
What is the lever called that holds the clutch at the "lower end"? The one the spring is attached too mine broke in half and can not figure out the name of it to order a replacement. Please help!
@kane_eightee
6 жыл бұрын
Zachary Dutton check out Babbitt’s online. They have exploded drawings of eeeeeeverything. You literally look at the diagram, and then xref the number to the parts list.
@paulwojnar2291
Ай бұрын
Also Yamaha Parts Nation. OEM parts with exploded diagrams and current part numbers.
@kevindoherty8234
8 жыл бұрын
hey i forgot to loosen the top clutch adjustment when I opened up the lower end adjustment now I can't get the lower end back correct. There was tension on the lower end when opened it. Any suggestions or comments?
@peterpiekarski4910
8 жыл бұрын
Kevin Doherty, do it all over again
@lovedeepsingh3684
4 ай бұрын
Hey, i just piced a 2003 yamaha 1100 vstar, it kinda stall in first gear. When at stop sign i have to hold back the clutch and give more throttle to move, works fine in second gear and up. Do i have to adjust the clutch?
@peterpiekarski4910
4 ай бұрын
Yours sounds like the handle of the clutch is misadjusted but you can do both. Why not?
@lovedeepsingh3684
4 ай бұрын
@@peterpiekarski4910 Sweet, ill try that. Thanks
@lovedeepsingh3684
4 ай бұрын
@@peterpiekarski4910 i haven’t adjusted it yet but on my last ride it seemed like it was miss firing at low speed, so like second gear. Could that also be related to it or am i dealing with a bigger issue?
@peterpiekarski4910
4 ай бұрын
A misfire is a different issue
@lovedeepsingh3684
4 ай бұрын
@@peterpiekarski4910 would you be able to advise where to start looking from? The manual says could be carburetor, air intake, spark plug among many things… The previous owner just replied and said plugs were changed last fall and he has never done carburetor in 2 years.
Пікірлер: 64