if only I had seen this before starting some complicated version with 2 x 4 arms. ahhhh. will be doing this with the rest of my garden tools . frickin genius simplicity.
@SimonSaysDIY
Жыл бұрын
Haha 😂 Thanks! Good luck with the rest of your project!
@KalsangDorjee
2 ай бұрын
love the simplicity, cutting through all the bs :)
@jeaniemalone5304
11 ай бұрын
Love this very doable project. Thanks for sharing!
@AncoraImparoPiper
4 ай бұрын
Great idea. I've got plenty of conduit/curtain rods hanging about doing nothing. Now I've got a purpose for these. Saved me a bit of money buying not having to buy the hooks.
@dogwoodtales
4 ай бұрын
Precisely what I was thinking about doing. Thanks for the proof of concept here. Nicely done! A little time and $20 beats the $$$ on Amazon for rack systems only half as good as this one. I added a second rack about 2-3 feet directly below the first. I hang a few things there too but also I found that adding a pair of pipes on the lower rack in line with the shovel handles keeps the shovels in good order. I followed your suggestion and just drilled a series of holes 3” apart to make it easily adjustable. Works great!
@johncasey4077
Жыл бұрын
It looks great
@SimonSaysDIY
Жыл бұрын
Thanks!
@taylorboyd1333
Жыл бұрын
Great idea, I'm doing it today Thanks
@SimonSaysDIY
Жыл бұрын
Hope you enjoy. Good Luck!
@danslininger1315
Жыл бұрын
Nice! I'm going to build one just like this! I think you'll find, as time goes on, that if you have the wall space to make room for more spaces would be beneficial. Some of the shovels do different jobs so keeping the spades seperate from the pointed shovels will help. Likewise with garden rakes and leaf rakes. Just so you don't have to hunt to the back of your piles :)
@johncasey4077
Жыл бұрын
That’s looks great
@gtdodgeviper
Жыл бұрын
Very nice, cheap and easy idea.
@SimonSaysDIY
Жыл бұрын
Thanks, I appreciate it! 😁
@heidibear44
3 ай бұрын
Such a clever idea. Thanks for sharing 😊
@SimonSaysDIY
3 ай бұрын
You’re welcome 😊
@FunDuude
Ай бұрын
You doubled up on the boards, I only used one. You used Conduit piping, I used 12 inch long Wood screws. I love your idea to though.
@johannesschneider9811
10 ай бұрын
Simple and cool 😎
@izzy8823
8 ай бұрын
Good idea, thanks..
@SimonSaysDIY
8 ай бұрын
Thanks! 😊
@claymore2k1T10
Жыл бұрын
Nice idea fitting all your tool hanger at head height, a nice accident just waiting to happen.
@janfelshaw8217
2 жыл бұрын
Good job!
@SimonSaysDIY
2 жыл бұрын
Thanks!! :)
@gareththomas6714
3 ай бұрын
very nice
@antonfarr781
2 ай бұрын
Great Idea! Im now a new Subscriber! Thanks for the Post!
@SimonSaysDIY
2 ай бұрын
Thanks for the sub! 😄
@user-em6ie2be7x
2 жыл бұрын
Nice...Easy & Functional. 🛠
@SimonSaysDIY
2 жыл бұрын
Thanks! I appreciate it 😄
@brendabaxter9297
2 жыл бұрын
Great ideas! Neat storage of tools for convenience and safety! 😄 I learn so much every time I watch your videos. Wish I had known these tricks when I was younger!😆❤🛠
@budmonk2819
Жыл бұрын
Nice idea with the pipes. If you're in a dollar store, those retractable prongs would be a better idea as well. Comes coated with rubber.
@SimonSaysDIY
Жыл бұрын
Thanks, I appreciate it! 😁
@kentshrader6616
Жыл бұрын
Nice!! Great use of space!!
@sheepdog3828
3 ай бұрын
Hmm so if i cut them to fit between the studs and use the conduit idea then the tools can be recessed a little better. Nonetheless nice idea, thank you!😊
@SimonSaysDIY
3 ай бұрын
That would be a bit more work but is a great improvement! Thanks!😊
@hlpursley5377
4 ай бұрын
I used 2x2 s ripped a 2x4 to save cost and used heavy pvc so it won’t rust and was cheaper
@aaron1626
Жыл бұрын
Great idea! Can you give any specifics on the type of conduit you used? I’ve never purchased it before but there appears to be a few different types.
@nonamechannel8110
Жыл бұрын
1/2 EMT (electrical conduit) it comes in sticks of 10 feet.
@brentk9520
14 күн бұрын
you should have removed the jagged edge of the conduit from your cuts or put rubber over the ends. this looks potentially dangerous...
@SimonSaysDIY
14 күн бұрын
Yeah, I was thinking of putting some kind of rubber cap over it but didn’t know where to find such a cap. I haven’t ran into them yet but have come close a few times.
@brentk9520
14 күн бұрын
@@SimonSaysDIY i am a retired electrician. most of us used channel lock model 420 channel locks for 1/2 and 3/4 conduit to deburr or ream the pipe to prevent damaging the insulation of the wire. the plier ends for the inside and the main jaws for the outside.works perfect.
@baileym4708
Жыл бұрын
I think there was a missed opportunity to not utilize the space in between the studs. I saw another video where she put the shelves/racks in between so things looked much for flush.
@SimonSaysDIY
Жыл бұрын
Yeah, I ended up putting my digging bars and longer tools behind the lack in between the studs. But much more can fit in the studs. Thanks!
@leeb.7188
Ай бұрын
That’s true, but notice that the studs in his shed aren’t uniformly spaced. He would have to measure and cut a lot of individual sized pieces of wood for in-between the studs. The method he uses is a lot faster and easier.
@awal0713
11 ай бұрын
I like it @simonsaysdiy! What size conduit did you use 1/2" or 3/4"?
@SimonSaysDIY
10 ай бұрын
Thanks! 1/2
@kentkjrgaardjensen4304
4 ай бұрын
Are the pipes just loose in the hole or fastened some how?
@SimonSaysDIY
3 ай бұрын
They seem to go in tightly but I have had a few that ended up feeling loose and I just screwed a metal screw through the 2x4 and into the pipe and that seemed to fix it.
@kentkjrgaardjensen4304
3 ай бұрын
@@SimonSaysDIY yeah I was thinking of that solution as well. Thanks for replying 😊
@zechariahsalisbury6029
2 жыл бұрын
Nice. Why deck screws though?
@SimonSaysDIY
2 жыл бұрын
Thanks! I just had them left over from my last project. You could use any type of nails or screws. :)
@zechariahsalisbury6029
2 жыл бұрын
@@SimonSaysDIY makes sense. I was thinking you could also use 4x4s if you had that around vs. two 2x4s or just if that was cheaper maybe?
@jackiebuettmann7895
Жыл бұрын
How far are the holes apart from each other
@HLSR
8 ай бұрын
better ideas out there.
@YoBravaFrumAnuvaMuva
Жыл бұрын
Is that metal or plastic conduit pipe? What are you cutting it with? Great idea, overall.
@adriansustaita2310
Жыл бұрын
Conduit
@gregorymosher5008
Жыл бұрын
He's cutting it with a reciprocating saw but you could use a hacksaw, grinder, metal saw etc
@fourftr
11 ай бұрын
What’s the answer metal or plastic
@francisniestemski7382
Жыл бұрын
If you have a small shed this would take up too much wall space.
@SimonSaysDIY
Жыл бұрын
True, what would you recommend?
@steveholden9139
Жыл бұрын
Buy a Bigger Shed 😂
@Kevin8U2b
Жыл бұрын
To save space just replace the conduit with hooks and don't double hang your implements on the same hook.
@robwilliams2265
Жыл бұрын
@@Kevin8U2b Wouldn't that limit where he can hang his tools? I am having the same problem he is with the amount of tools, and if you could explain a little bit better how to solve it another way without taking up so much space, it would be helpful
@Kevin8U2b
Жыл бұрын
@@robwilliams2265 this video is a fantastic idea. I hate to try to add overtly much to an idea that's not mine, but it sounds like you'll have to measure your wall. Mark the ground outside your toolshop to the exact dimensions of your wall and then place your implements where you want them. Either they fit or you'll have to get a second pair of eyes to help sort.
Пікірлер: 69