Legend. Was sittimg there doing myself in and found this video. Saved me alot of head f's. Cheers.
@rayofsunshine9041
4 жыл бұрын
Rhys Rhys cheers bro glad i could help
@danielirvine7468
2 жыл бұрын
Thanks so much just got this model and spent ages then thought to check here and there you were thanks mate appreciate the time in making this vid
@JessicaSward
Жыл бұрын
Thank you, saved my husband from smashing it!
@robthejones
4 жыл бұрын
No need to take the bumper off. Just lay it flat, grasp the cap as old mate shows and thread your line. Be sure that spring stays in place ( it should) and turn your knob clockwise so the spring does its job. Knob jokes welcome.
@roslynt6228
2 жыл бұрын
Thank You so much, helped so much. Was gonna throw it outside, but Thank God I found your video. You saved me alot of headache, Thank you again Xo
@hollowdeva
3 жыл бұрын
Thanks very much for that demonstration. I've been regretting my choice to buy a Yardking mostly because I couldn't figure out how to get the spool off.
@dannywood7450
2 жыл бұрын
Thanks mate, spent hours trying to work this out. Legend!
@perristevens449
Жыл бұрын
👍🏽 couldn’t figure out until watching your video. Thanks
@hayleydixon4700
3 жыл бұрын
Thankyou very much!!! Very helpful I’ve finally got it back together:)
@LAX1E
4 жыл бұрын
You are a legend. Have wasted an hour trying sort this thing out. Instructions are useless
@alanocallaghan2883
9 ай бұрын
Thanks mate , saved my day
@vd_a6169
3 жыл бұрын
Thanks mate helped me out today big time 👍
@davidmatthews2983
Жыл бұрын
Carn ray, I’m here to see how to spool the line on manually. The arrows don’t seem to help, I want to split the line but I can’t seem to get the bump feeder to actually feed. A demo on that thanks cobba? Cheers bull
@Tokinkiwi
3 жыл бұрын
You bloody legend!!! That helped so much!!
@glen3155
8 ай бұрын
Thanks mate.
@andrewmcpherson535
2 жыл бұрын
Hi thanks for posting the video. Are you still happy with the machine? Also assuming as it’s a 4 stroke you can’t turn it on it’s side to get a nice edge? Thanks again.
@KathBonnett
Ай бұрын
New one you don't take off brilliant just thread through same length either side wind on with the centre piece clockwise jobs a good one that ks for heads up my mate all the best
@adventures7497
Жыл бұрын
Thanks champion
@MissNekeyta
4 жыл бұрын
Thanks, helped me out heaps
@rayofsunshine9041
4 жыл бұрын
Deborah Taputu welcome Deborah glad it helped
@bcalpis
4 жыл бұрын
Champion 👍 thank you 🙏
@prashanthmathew5335
3 жыл бұрын
Thank you :)
@MIke_nolan50
Жыл бұрын
cheers mate
@anthonydowling5361
3 жыл бұрын
The easiest way is to push firmly on the side where the indentations are for your fingers.
@janetbuderus1612
3 жыл бұрын
Thanks Alot it was very helpful 💪🏾
@rayofsunshine9041
3 жыл бұрын
glad it helped
@joanneoliver7206
Жыл бұрын
Thank you 😅
@adamguinea8448
2 жыл бұрын
Mega helpful
@Freebirddaddy
2 жыл бұрын
All that just to be like “read the back”. 😂
@rayofsunshine9041
2 жыл бұрын
read the back of what.? nothing to read hence putting up information to help people, but obviously it was no help to you but then i see you haven't lodged up any helpful videos to help others. Maybe alot of troll comments. But you have a great day.
@Freebirddaddy
2 жыл бұрын
@@rayofsunshine9041 I’m sorry that you felt the need to think I’m a troll, you said to read the back of the trimmer head for how to line it up. You did not physically show us how to Reline it- which means, this video was honestly pretty pointless and unhelpful to me. I did however find someone using a victa who had the same bump head feed system who did actually show how to Reline it and it worked perfectly. Is this enough detail for you as to why I think your video was unhelpful?
@nkwoody7287
4 жыл бұрын
Thankyou so much. I looked at it, could not find my book anywhere, and thought how the hell am I ever going to get this thing off...add a few more embedded swear words 😆. Off to find an allen key and tackle the wind on. I swear there is not enough alcohol in this house today 😂
@rayofsunshine9041
4 жыл бұрын
NK WOODY all good bro hope it helps i was in same situation and couldnt find decent help hence the amateur video.!!
@BoolyThePirate
3 жыл бұрын
Thanks champion 👌
@arnoldrobertson1032
3 жыл бұрын
How do you put line on a yard King brush cutter
@fordcasino2932
3 жыл бұрын
Thanks.
@danielkatsogiannis7009
3 жыл бұрын
Legend thank you
@jasonfisher4491
2 жыл бұрын
Do you spool the line back on right or left-handed? You cant do both or it won't self feed
@PaulLepCooking
3 жыл бұрын
This didn’t show any line replacement?
@johnnytchia1601
4 жыл бұрын
You dont need to take the whole bump head off to change the line, thanks for sharing though.
@rayofsunshine9041
4 жыл бұрын
Yes i know but i was showing ppl basically how to take it all off and how to replace seeing there is literally no vids to show this
@johnnytchia1601
4 жыл бұрын
@@rayofsunshine9041 can you do a video on servicing?
@johnnytchia1601
4 жыл бұрын
@@rayofsunshine9041 my original bump heads almost gone, do you know where I can get replacements?
@rayofsunshine9041
4 жыл бұрын
JT only place i know of is chase your model number on ebay as this is the only place i have seen extra parts..👍
@mick4643
4 жыл бұрын
Great vid :)
@TheHomeOfEverythingSimulation
3 жыл бұрын
Dumbest design ever! Thanks for the video though, helped me put line on after having it for nearly two years lol
@cornpop..9921
3 жыл бұрын
Skip 1st step not necessary
@19pmack89
2 жыл бұрын
This was no help at all, would at least like a demonstration of how it goes, im just used to the old 50 yr old ones not these new ones
@DanTheManG077G
Жыл бұрын
You just made it ten time harder then it actually it, and what’s sad is ppl are actually listening to your bs
@Rapped.In.Plastic
Жыл бұрын
This was a waists of time lol
@DirkDiggler_18
2 жыл бұрын
Thanks mate
@1kallay
Жыл бұрын
You haven't shown us how to wind the line on, that's why I came here
@michaelclarke-rn7eo
2 ай бұрын
Your a legend
@bastiaansnijder5317
2 күн бұрын
Have exactly the same machine, also in WA. Taking the head off is easy thsnks to your vid. But winding a new line in is a little tricky. The owners manual is fairly clear how to do it though. But there is a difference between reading and doing..
@dazlerlister2288
Күн бұрын
Thank you so much i would never have figured that out, your the man mate.
@heavenlysaber
2 жыл бұрын
It would be helpful to show the line going in.
@ryanlennon1940
Жыл бұрын
The biggest issue
@xx3868
5 ай бұрын
Hi, do you know the valve clearances on this? . i think its the 883222 model 24.5cc YK
@gordonarmitt9346
2 жыл бұрын
Cherry mate good stuff
@IsaacLHarrison
6 ай бұрын
Thanks uncle
@geoffmylne1001
10 ай бұрын
Thanks Legend
@michaeltuffin5002
2 жыл бұрын
U should show us the whole lot mate
@David-st8te
2 жыл бұрын
Thanks Geoff. You sound like a fellow OZ. I have the same trimmer. Bought from Bunnings 3 years ago. Now it stopped during last weekend use. I can’t pull the cord. So search online. 1. Put new 4 strokes 2. Open the spark plug and spray WD4 in. 3. Engine can turn but not all 360 degrees where I watch one with the same promenade (Echo) hie can turn the engine to 360. Can you advise please anyone. Put everything back and still can pull. Thanks.
@rayofsunshine9041
2 жыл бұрын
David i ended up throwing that trimmer on the verge collection days got a 4 stroke Makita no issues what so ever..
@David-st8te
2 жыл бұрын
@@rayofsunshine9041 Thanks Geoff. I still hand on to It. I bought a Vita, 2 strokes. Work great.
@bastiaansnijder5317
2 күн бұрын
@@rayofsunshine9041 And Bunnings does not seem to sell Yardking anymore (sept 2024)...
@rayspeed
3 жыл бұрын
Have just bought one of these and for the life of me could not work it out, You tube is my friend thanks mate
@Blackbird3170
3 жыл бұрын
You don't take spool off completely, just bottom part, is squeeze sides and remove
@bigsister47
3 жыл бұрын
Thank you even ladies can learn , now I can replace my trimmer line
@the4321man1
3 жыл бұрын
Thanks mate was bout to go at it with a hammer haha
Пікірлер: 76