Yes, yes, and yes! Everything a Yerfdog needs in one video. Perfect. I've been looking for a yerfdog 420 conversion and frontend upgrade video like this for a while. Super quality video as well. 👍👍
@TyranisCustoms
3 жыл бұрын
You should check out our 420 & dual arm conversion on the same yerf dog. I love these 3203s!
@coreyhorning9872
2 жыл бұрын
Great video! My favorite part was you two guys just enjoying yourselves at the end
@gregsilva1472
4 жыл бұрын
Awesome video thank you so much sir thank you for teaching me how to reuse my cable
@AdamKimball-jb9gn
5 жыл бұрын
Dude that thing rips keep up the good work 👏
@LAFisch01
5 жыл бұрын
Thanks for sharing this video and the build. I've seen a few other swapped yerf dogs, but not much on how others have done it. Looks like my son and I have some work to do.
@offhandacoustic
Жыл бұрын
150$ ebay shocks for the front and rear completely changed the ride quality on my yerf dog. I can fly through my field now and the shocks just soak it up. Highly recommend some upgraded shocks, you wont regret it.
@u4eeahh676
5 ай бұрын
Wow, that's got some Zip nice build
@curtpyro1518
6 ай бұрын
I love this, awesome video. I do have a question, how can I tighten up my brake on my yerf dog? thanks your video was very helpful
@209farmz
Ай бұрын
Just picked me up a 3203 yerfdog 🔥 bouta do a full restoration
@Jl3l23W3l2
5 жыл бұрын
Nice work dude.
@RastaBTv
5 жыл бұрын
Got another one up an screaming down the highway. Wicked. Blessings my brother Rastafari
@lizzard7473
4 жыл бұрын
Lol I'm putting a 440cc duromax on a yerfdog now. Except I've pulled the governor while adding that upgrade. Hat's off to you for using gopowersports.com. I recognize their products. I use them too.
@marvicty
5 жыл бұрын
Dude was rippin down the parkway at the end of the vid
@cqgranite
4 жыл бұрын
Awesome work bro
@mrhighpower5632
5 жыл бұрын
Looking good bro.Im in the process of swapping a gx390 in my kids yerf dog
@moyeet7
2 жыл бұрын
what wire did you use to extend the electric start? I want to do this to my go kart
@markdahl9453
3 жыл бұрын
Cool beans !!!
@coryblain4917
4 жыл бұрын
Hey man, what altitude are you at and what jet size did you put in the carb? I tried taking my go kart up to an area where it was 6000 altitude and the engine kept dying.
@bigloads3600
Жыл бұрын
The intro of you losing control of a go-kart tells me everything I need to know lmao....
@chrisish4979
11 ай бұрын
Your a Prius guy as well lol I also have 2
@LuchMobGarage
5 жыл бұрын
Looks good runs sweet awesome job bro good to see you tinkering 🤘🏻🐿🤘🏻 keep em coming 🤘🏻🐿🤘🏻
@madmoe3657
10 ай бұрын
Im looking to do the same build, i would like to pick up a 40 series torque converter which brand torque converter did you go with?
@thepoopsoup
2 жыл бұрын
Tighten the front shocks. Look at that camber angle
@lexingram8622
4 жыл бұрын
Watch this on 1.5x speed
@monkeydude3987
4 жыл бұрын
Nice upgrade here! I'm trying to get this model of Yerf Dog myself, though not sure when I'd put a bigger motor in it.
@slow6.7
4 жыл бұрын
We have a spider box with a predator 420 and a very very good torque converter and a lift bout to get some mud tires it’s not fast but it’s made for off roads and rocks because I live in nc so it’s hilly
@lomsomesGarage
4 жыл бұрын
Great viedo
@IssacLopez-b5v
7 ай бұрын
I got to know, where did you find a torque converter like that
@michaelglenn1730
3 жыл бұрын
Good work my man…
@savagestaysaucy
Жыл бұрын
What size socket do you use on the back tires
@Kartastrophic
Жыл бұрын
I cant remember. It was a while ago.
@rcfs835
Ай бұрын
What size of borders on the back of the go-kart
@ultramegamike5000
4 жыл бұрын
Use your welder to cut the cable just one quick zap and itll burn through and weld/melt the strands of cable together so theyll never unravel.
@iceyisaac665
4 жыл бұрын
I'm getting a yerfdog in 3 days I was wondering if a predator 212cc engine with a stage one kit would do well with it
@aaronjones5372
4 жыл бұрын
Most definitely..do a torque converter instead of centrifugal clutch tho. Mines completely stock and hauls my 200lb self around..
@iceyisaac665
4 жыл бұрын
@@aaronjones5372 okay i will
@mferrarorace
2 жыл бұрын
Just make another engine plate that matches the holes and drill out the existing one. Right over the top bro
@aaronquiroz2474
Жыл бұрын
Anyone know what how long that rear axle is. I'm looking to buy a new one on Amazon they have a 40 inch and 44 inch and is the axle diameter a 1 inch? Thanks
@T_gaming28
Жыл бұрын
Do you think a predator 459cc would fit?
@edgarruiz7441
2 жыл бұрын
Great Video man, what size or teeth is your sprocket?
@Kartastrophic
2 жыл бұрын
I'm not sure sorry. I sold that kart long ago..lol
@johnnycashe1
2 жыл бұрын
Dude this was so helpful. I know this was 2 years ago but how much did you end up spacing the sprocket on the Jack shaft?
@Kartastrophic
2 жыл бұрын
I couldn't tell you I'm sorry
@dloren6183
3 жыл бұрын
Paul Wall babyyyy
@prcc8793
4 жыл бұрын
Where can i get the stage kit..and wish one works on a 420 predator?thanks
@noeltalamantes9701
4 жыл бұрын
Where can I get that whole clutch plate set up lookin to do the same swap
@lizzard7473
4 жыл бұрын
40 series torque converter
@ScottieDobbins
8 ай бұрын
I got a 15hp on side by side it hard to start it has compression getting gas and spark
@rf4215
2 жыл бұрын
Great job on the video! Question, I inherited a different model yerf dog with a 420 predator installed. the torque converter is facing inward toward the motor. Is this ever acceptable or should it be facing out?. Just learning.. Also, when we pull start this it engages the wheels and wants to launch. Any advice on fixing this?
@T_gaming28
Жыл бұрын
I'm not exactly sure what you mean when you say the TC is facing inwards but for the launching problem I'd say to turn the idle down
@ddragonchannel1952
Жыл бұрын
how do i alight the converter sprocket with the gear? and what size bolts do i need to secure the gear?
@joeyquinton6243
Жыл бұрын
I am looking for a starter for mine I don't know where to get one
@russellcatron3185
3 жыл бұрын
Is that a Blast led torque converter? I think mine has the spring wound the wrong way
@2183valerio
3 жыл бұрын
I have one with the stock engine. There is a wire that comes out of it. Is that for the a light?
@jamesbryant7355
2 жыл бұрын
Hello hope all is well have you ever done a gear box with reverse on a 40 series torque converter.
@Kartastrophic
2 жыл бұрын
No sorry. I almost did on a 212 kart but never did.
@Backroadmuscle
4 жыл бұрын
What's the drill bit u used on that steering and size of bolt put in it
@emersontjaden8857
2 жыл бұрын
To keep the frame stock would I have to put a different exhaust and air filter on it ?
@thenervoussnail9342
5 жыл бұрын
What do you think about the Honda 420s?
@lizzard7473
4 жыл бұрын
Poop
@axelvazquez8941
3 жыл бұрын
Do you have more 40 series torque converter for sale, how much how can find you?
@Smokeslingerowner
2 жыл бұрын
Maybe heat shrink would work also vs tape ?
@Smokeslingerowner
2 жыл бұрын
Or solder
@RicardoTorres-hp1sd
4 жыл бұрын
What size of a socket does it take to take the bolt out of the rear wheels
@JumpoutJ694
4 жыл бұрын
Hey man is that 420 governed? I’ve got the exact same cart that I swapped a Honda gx390 onto with a 40 series torque converter but it’s a slouch.
@lizzard7473
4 жыл бұрын
Try regearing it.
@oneeye6033
3 жыл бұрын
I'm thinking of putting a DuroMax 420cc 16hp engine with a 40 series torque converter on an old 2 seater yerf dog frame. Do you think this will fit? I'm not too experienced with karts so any help/advice is greatly appreciated. Thanks!
@Kartastrophic
3 жыл бұрын
You can make anything fit with a welder..lol..
@LeeLlewelyn-i5j
6 ай бұрын
Where can I buy Yerfdog wheels?
@Kartastrophic
4 ай бұрын
Go power sports?
@jesusadventurervargaspropu4510
4 жыл бұрын
What chain did you use for this kart?
@aaronallison9815
3 жыл бұрын
what size socket for the back wheel ?
@guadalupezarazua4857
4 жыл бұрын
If I have a yerf dog, how can I adjust the drum brake and why do I have to accelerate it so that it does not turn off?
@lizzard7473
4 жыл бұрын
There is no adjustment to the drum. And its shutting off because that tecumseh needs a new carb. Replace the engine with a new 212cc predator. You're gonna be much happier.
@kagutierrez90
3 жыл бұрын
what torque converter did you use? i have the 420 cc predator. and tue Yerf dog . just needs a list of parts you used to get the yerf dog running.
@ACG7001
2 жыл бұрын
I just bought a 420cc and have a yerfdog 3202, has anyone done this swap and what has to be done?
@madmoe3657
5 ай бұрын
Just curious did you already do an engine swap on your yerf dog yet. I just test drive mine today and it rips
@bryceharbertson5703
3 жыл бұрын
what’s the bolt size for the wheel?
@andygutierrez5825
3 жыл бұрын
I need help my front suspension is shot it has way too much inward camber any suggestions
@tonyt4140
3 жыл бұрын
Ditto for me. I'd love to replace suspension F&R w/ something hydraulic, but not sure what'll fit and what works.
@frankcioffi5122
3 жыл бұрын
I know why
@Sandoval0810
4 жыл бұрын
I got...1 but idk how changue the oil help...
@davidiniguez5958
4 жыл бұрын
I have the 346cc motor what torque converter would I need brother
@BMXrecords
4 жыл бұрын
40 series to be safe, 30 series to be risky both work.
@davidiniguez5958
4 жыл бұрын
@@BMXrecords thankyou brother love your videos they help alot yea I have the spider box I swapped a 346 predator and I was iffy about what torque converter to use thanks again
@lizzard7473
4 жыл бұрын
Dont waste your money on a 30 series. Go with the 40 and be happy. Your just gonna have to trust me on this.
@zack2277
5 жыл бұрын
Wassup
@lizzard7473
4 жыл бұрын
18hp duromax. .
@dloren6183
3 жыл бұрын
Is this way faster than a 212engine?
@squishytacticalnuke6991
3 жыл бұрын
Way faster
@jamardean4185
4 жыл бұрын
How much are you selling a 420cc engine for
@Kartastrophic
4 жыл бұрын
I'm not selling any engines.. I had one for sale last year and it sold already.
@davidiniguez5958
4 жыл бұрын
Someone please help
@monkeydude3987
3 жыл бұрын
Also thanks for the tip on cutting the cable! Here is our build - we ende up getting a 3203 like this yours but the engine swap I'm doing is not quite the uprade as you, ha! www.diygokarts.com/community/threads/yerf-dog-3203-light-refurbishing.44586/
@robcarter2891
4 жыл бұрын
Need muffler
@sharonbooker1272
Жыл бұрын
A call me
@almightysoul4475
5 жыл бұрын
Yo..i cut my throttle cable with my welder. Just a quick hit cuts and welds it together.
Пікірлер: 102