Sedge, you’re the greatest! After watching this, I’ve regained my confidence in doing roundovers. Now I’ll NEVER make the mistake again. Best, clearest teacher ever (and funny to boot!).😊 Thanks for your work!
@sedgetool
3 ай бұрын
wow...Thanks !!
@AngieWilliamsDesigns
Жыл бұрын
Every single time I go to the router I question myself on which way to go. I hope I can remember this. This is super helpful.
@sedgetool
Жыл бұрын
Great to hear!
@wittworks
Жыл бұрын
I was looking for the best mortise I’d ever seen but couldn’t find it 😮🎉
@sedgetool
Жыл бұрын
LOL !!
@alancroft6928
Жыл бұрын
Love the thumb and forefinger trick. It puts smile on my face, thanks mate.
@sedgetool
Жыл бұрын
Thanks Alan
@joebeaton1101
9 ай бұрын
Great tutorial on inside / outside routing!! Learned how to go around corners easily when rabbeting > Thanks!!
@sedgetool
9 ай бұрын
Glad it helped!
@xinixxagnix201
Жыл бұрын
Bench Heavy energy, u2 are a great teaching couple with a smile also, thanks!
@sedgetool
Жыл бұрын
Thank You !!
@kevincriswell7533
Жыл бұрын
Great info for newbies Sedge. Really enjoyed meeting you at the Austin Recharged event. My daughter Megan said you are a true showman! Please remember to give Big D my message👍🏼
@sedgetool
Жыл бұрын
will do
@andysordi9976
Жыл бұрын
One of my favorite Sedge tips!
@sedgetool
Жыл бұрын
Thanks Andy !!!!
@warrensmith2902
Жыл бұрын
Great job as always. Years ago before I heard of the magic "L", my dad taught me "Left to right, that's how you write and route".
@sedgetool
Жыл бұрын
too cool Warren..
@bradleytuckwell4881
Жыл бұрын
Great tip and so easy to remember thanks
@sedgetool
Жыл бұрын
I like "Easy to Understand " has often been a confusing topic in teaching woodworking / power tool safety.
@craftycouplecreations4310
Жыл бұрын
Awesome literally still the tool that makes me the most nervous even over the lathe 😂
@sedgetool
Жыл бұрын
the router is the most versatile tool in any wood shop...it can also be the most dangerous...before turning on any router I always make sure I am going in the right direction ...
@craftycouplecreations4310
Жыл бұрын
@@sedgetool absolutely
@georgebutler3rd
Жыл бұрын
Good teaching, Brian! Thanks, man!
@sedgetool
Жыл бұрын
Thanks George
@willsachs
Жыл бұрын
Really great information thank you! Love the channel. Don't routers spin counter clockwise below the equator? hehe
@sedgetool
Жыл бұрын
good question
@fabian3265
Жыл бұрын
Wow that finger thing is genius, gonna remember that for the rest of my life and teach others aswell! What is the best chamber bit for a 1010? I’m in the market for a new one and find it hard to find Anglo’s brand. What do you suggest?
@sedgetool
Жыл бұрын
There are some good ones from Bits and Bits...check them out !!
@BW-cw4lq
Жыл бұрын
Hi Sedge, great lesson on the router today! Blake
@sedgetool
Жыл бұрын
Thanks Blake
@jaybird697
10 ай бұрын
I hope you can answer my question; I am currently make a guitar with walnut with organic shape (telecaster) I am trying to trim an edge (small indent all around to install bindings later). I tried flushing the edge before, but it got jerked and destroyed one of the points. I was going counter clockwise. I have the latest version of the OF1010, but It seems to mostly jerk perhaps because it tips a little. Assumption. The bit has a bearing. I was wondering how I can safely have a go at it again. I try to make small passes, but I think it has to do with either the tipping, wood grain.. or perhaps both. I do not use any accessories with it. I try letting the bearing do its job. I hope you have a tip for me, and hope you can explain it like I am a 3 year old :)
@sedgetool
10 ай бұрын
That is a tough one...The grain of the wood seems to be the culprit in your situation..... i use ultra shear bits in this situation..or I use a climb cut in very very light passes when the grain is in reverse...Hard to describe in typing words..I hope this makes sense....
@michaeloliver3507
Жыл бұрын
TAUGHT CABINETMAKING FOR 45 YEARS - EASIER METHOD: COUNTER ON THE OUTSIDE - CLOCK ON THE INSIDE
@sedgetool
Жыл бұрын
Tried that once a few years ago with a 16year old... Dis not know what counterclockwise or clockwise meant..he had grown up in a digital world....
@CodeBadger-xh6xg
Жыл бұрын
Awesome and easy!
@sedgetool
Жыл бұрын
Thank you! 😊
@MINGLE2008
Жыл бұрын
A very great video thanks
@sedgetool
Жыл бұрын
Thanks
@Axmaxify
Жыл бұрын
Great as always guys!
@sedgetool
Жыл бұрын
Thank You !!
@missingegg
Жыл бұрын
Good rule of thumb, but worth pointing out that the spin of the router flips around when it's inverted in a router table, and the right hand rule become incorrect. Climb cuts can be controlled with a hand held router on the top of a piece, but climb cutting with a router in a table is very difficult to control, and you stand a good chance of flinging your work piece across the shop.
@sedgetool
Жыл бұрын
Thanks
@davidmeyer9204
Жыл бұрын
Thanks Guys!
@sedgetool
Жыл бұрын
Thanks David !!!!
@garywheeley5108
Жыл бұрын
Top tip so simple 🇬🇧👍
@sedgetool
Жыл бұрын
Thanks Gary
@chdinct6792
Жыл бұрын
Helpful. Thanks. How about when using a router table.
@sedgetool
Жыл бұрын
Stay tuned !!
@falxonPSN
Жыл бұрын
Use your left hand!
@wittworks
Жыл бұрын
Wicked
@sedgetool
Жыл бұрын
Wicked
@microdoulo2250
10 ай бұрын
what bit use the router 700 for plywood drawers?
@sedgetool
10 ай бұрын
6 mm
@kathrynnewton8721
Жыл бұрын
Ok! So the thumb is on the edge that you are cutting and the index finger points the direction, thank you, think I’ve got it!
@sedgetool
Жыл бұрын
ok .. glad you got it
@charlesmcarthur5722
Жыл бұрын
i was taught. router in hand: is like reading a book, the router moves left to right. router table: is like you tossing a baseball in your mitt. the wood moves right to left, if your right handed.
@sedgetool
Жыл бұрын
Good too know..Thanks !!!
@paulkramer4176
Жыл бұрын
True, but Simplistic frankly. I agree this is fine for beginners or intermediate users, but there are times when you are better off going the opposite direction. Heresy? Nope. Climb cutting, (a better explanation rather than "kick back" frankly) CAN leave a nicer surface! Sure, if you want to hog off a lot, don't do it, but in woods that will chip or tear out, a final light pass in the climb cut direction will make less tear out. Why, because blades are cutting the fibers against the frame, rather than potentially pulling them up. And another thing, consider modifying your router base. Elliptical bases, with an additional handle out on the small end, will make a more stable base, and give you a lot more control. Not needed on all your routers obviously, but why do people think that a router, balanced basically close to it's center of it's base, is stable?? Keep that offset handle securely on the work and it is much easier to make a perfectly routed profile.
@sedgetool
Жыл бұрын
Good For You..Thanks for sharing...
@joshuabray37
Жыл бұрын
The direction is a lot more obvious (at least for me), on a router table. You can tell pretty quickly that something ain’t right.
@sedgetool
Жыл бұрын
True...looking to do a router table video soon...
@kathrynnewton8721
Жыл бұрын
I’ve never quite got that, surely you can hold your fingers differently? But I’ll keep watching….
@sedgetool
Жыл бұрын
wait for it !!!
@mitmamitmus4113
4 ай бұрын
just say push against the bit rotation ,simple
@sedgetool
4 ай бұрын
ok
@hhanger1
Жыл бұрын
And on a router table, it's reversed because the router is upside down. Always right to left on the router table.
@sedgetool
Жыл бұрын
Thank you !!
@ddova11
Жыл бұрын
I wish my name was Big D
@sedgetool
Жыл бұрын
👍
@MattLitkeRacing
Жыл бұрын
The wrong way is called climb cutting for a reason! Lol that router will climb up on you
@sedgetool
Жыл бұрын
Have had it happen...
@heriberthuber54
Жыл бұрын
I dislike video titles like this.
@sedgetool
Жыл бұрын
Thanks for watching
@heriberthuber54
Жыл бұрын
@@sedgetool did not watch, just dropped in to leave a comment :-)
Пікірлер: 76