I would’ve loved a true replica of the old sand shark in a regular production run (if it’s a limited run there’s no way I can enjoy actually using it) BUT I do like that they improved the typical OTF design in someways. Hopefully the company will listen to us and give us a proper reboot! Thanks again for making this video!
@edged_mindset
3 ай бұрын
Absolutely agree
@PirminZemp2731
3 ай бұрын
Mega Cool OTF Knife Awesome Greetings Pirmin From Switzerland 🇨🇭
@edged_mindset
3 ай бұрын
👊
@Rob_h_floridaman
3 ай бұрын
The carriage was sitting on the rear locking lugs the first time. When you took the cover back off the carriage slid forward into place. 👍
@edged_mindset
3 ай бұрын
👊
@jpc3874
3 ай бұрын
@@edged_mindsetyah man don’t be scared to take them apart that’s why there is removable screws
@edc_driving_me_knucks
2 ай бұрын
I came to say this, someone else caught it o.
@Chris_In_Texas
3 ай бұрын
Thanks Carter... Something to remind you maybe a little lithium grease on the springs the next time you have it open, although you might not be able to hear the springs through the heavier walled stainless. 👍🤠
@edged_mindset
3 ай бұрын
I probably should have thrown some on for good measure but I am hearing no spring sing at all
@ClintCoon1976
3 ай бұрын
Never took apart that type of OTF. Actually seems easier than a top switch. The 2/2 lock gates are why its super strong just like the Maxace Neptune. The steel Maxace Medusa is 431 Steel, its insanely strong, but also insanely heavy. Its an 8oz OTF.
@Obsidian-One
3 ай бұрын
I heard you say it was different internally, thank you now I see. I don't like face switch otf's, but I like the double gate open and closed! The bottom gates were not on track with the track
@billyfrear2340
3 ай бұрын
Cool. Glad you took it apart. Insides look good. If I remember correctly the original had a mechanism that one could adjust blade play, otherwise I like the double locks and the stainless 'scales".
@edged_mindset
3 ай бұрын
Yes, entirely different system inside on the original.
@gigilaco
3 ай бұрын
Thank you brother!!
@edged_mindset
3 ай бұрын
You bet!
@mistermaleebs3916
3 ай бұрын
Entertaining video, thanks. Idea for one of your rant videos- see that eagle claw on your workmat? NO, that is not the Microtech 'claw' logo. It is the unit insignia of the US Army's 17th Airborne Division (Golden Talons). Heres the rant: HOW can Microtech register trademark that as their logo??? Guess i can register trademark the 2nd Ranger Bat scroll for myself; maybe you'd like to register the Presidential Seal.... thought that was illegal but IDK, its like soup on a plate- it just aint right
@edged_mindset
3 ай бұрын
😁
@willschaff969
3 ай бұрын
I really hope they make more
@BrandonA-w2j
3 ай бұрын
they are in stock
@edged_mindset
3 ай бұрын
There are move avail right now and I'm sure there will be more runs in the future
@David_DY
3 ай бұрын
American edge knives have a few l believe..I figure they will make other variants in the future but probably not with a stainless steel chassis!! 👊🏻
@bawihmung3544
3 ай бұрын
These are limited right?
@edged_mindset
3 ай бұрын
Who knows. They said 300 in this first batch, but I havnt heard anything specifically saying hmthis config won't be produced again.
@David_DY
3 ай бұрын
Supposed to be limited to 300 I believe they will make more But probably not with a stainless chassis But only time will tell.
@mistermaleebs3916
3 ай бұрын
The original word months before being released was limited run of 1000. Then 300 were released in SS. I speculate if originally a run of 1000, that only so many in SS released and as getting feedback from that release quite possibly the rest being colored aluminum body variations.... IDK, just a thought
@elde667
3 ай бұрын
DON’T DO IT!!!
@edged_mindset
3 ай бұрын
😳
@Malehanger
2 ай бұрын
I find it pathetic that Microtech can use lower quality materials like 6061 aluminum and have a blade wiggle, yet still charge $1,000+ on knives inferior to my Deadlock.
@edged_mindset
2 ай бұрын
Not a Microtech but I get what you are saying
@Malehanger
2 ай бұрын
@@edged_mindsetthe microtech you compared the "sandshark" to in this video.
Пікірлер: 32