I think when the Emperor said: "Like clay I shall mould them and in the furnace of war forge them" I don't think this is what he meant.
@GreenSabre187
11 ай бұрын
almost "like play doh" was the quote
@toi_techno
11 ай бұрын
He actually said :"Like clay I shall mould them and in the BIG CLAMP of war squish them"
@ColonelSandersLite
11 ай бұрын
You question the word of the emprah? Heretic!
@TempOne-vh4fd
11 ай бұрын
Check your local library for a 3d printer. I just recently found out ours has 2.
@peterkiss1204
11 ай бұрын
@@TempOne-vh4fd I bet it"s an FDM and not a resin printer. For this small scale modelling FDM is usually unsuitable. Or takes a lot of work (sanding, or using fillers) to get rid of the layer lines. And the models lose some of the details in the process.
@AzaMinis
11 ай бұрын
I do really enjoy the irony of a “how can I make infinite space marines?” Video in which a 3D printer is used, but not to make infinite space marines
@grantbarnes3678
19 күн бұрын
Same
@arandomlostsoul753
11 ай бұрын
If you want a REALLY sturdy marine, you could turn this 3D print mould into a rubber mould and cast it in white metal. Now that's old school.
@Lazyjim77
11 ай бұрын
Full circle.
@lctaylor6
11 ай бұрын
Get cheap metal utensils and plates and cups from a thrift shop, melt them down, and cast them. However, you should use a lead tester unless you’re very confident you’re not going to swallow or lick your marines.
@T0mm3n
11 ай бұрын
@@lctaylor6 Cheap utensils are probably going to be made out of stamped steel and are way beyond what you'd be able to melt down at home. Would be better just to buy some white metal and use that, it isnt *too* expensive afaik
@thatHARVguy
11 ай бұрын
@@T0mm3n Aluminium soda pop/drink cans.
@davydatwood3158
11 ай бұрын
You can melt the metal bases of Matchbox cars in a coffee can over an open fire. Things you discover when you're a teenager...
@Daydam
11 ай бұрын
The whole Play Doh Space Marines ad was pure gold. The editing, the script, the humor, it's just perfect.
@chrisanderson5100
11 ай бұрын
So savage , “she took the kids…” 😂
@altec0312
11 ай бұрын
"She's not coming back." 😂😢
@thiabreu
10 ай бұрын
YESSS
@fernandozavaletabustos205
10 ай бұрын
The true "We have Space Marines at home" experience!
@Trepanation21
6 ай бұрын
That was literally the moment(s) that I rushed to Like the video hahaha
@pavarottiaardvark3431
11 ай бұрын
The real question is: can we seal the mould with anything that makes it suitable for food? EDIBLE SPACE MARINES
@SonsOfLorgar
11 ай бұрын
For Tyrranid and Ork players who wants to teach others how to play?😂
@Cry2punkt0
11 ай бұрын
Marzipan, i work at a company that does stuff like that but i would imagine GW wouldnt like that :D
@anothernate3302
11 ай бұрын
Gummy marines would be super easy. All you would need is to add a sprue and print in food-safe resin.
@Abyssal_productions
11 ай бұрын
you have sugar paste, that would work as a charm!
@pavarottiaardvark3431
11 ай бұрын
@@Cry2punkt0 problem is 3d printer resin is porous and this not fiid-safe, so it'd need a coating on the inside before you make food in it
@fernandozavaletabustos205
10 ай бұрын
The true "We have Space Marines at home" experience!
@CourtneyVarner
11 ай бұрын
"she took the kids" absolutely destroyed me.
@sisco8225
11 ай бұрын
I feel like La-Doll clay from Japan would work really well for this, its a product created to make realistic Ball Jointed Dolls. When it is dry it does not shrink at all, and its designed to be painted on when dry, ends up with a really smooth finish.
@blacklabelz9
11 ай бұрын
Its always impressive how high quality the editing is for your videos.
@roguehobbies
11 ай бұрын
Thanks! I really appreciate it 🥹
@benvoliothefirst
11 ай бұрын
Your paint jobs were like magic. This went from a fun novelty to genuinely impressive.
@Brickerbrack
11 ай бұрын
Milliput could be a good call too; I find it tends to be a lot softer than Green Stuff when mixed, especially if you get it nice and warm, and you can also leave it to cure for a while in the mould, so it should be sturdier when you try to release it.
@marasmusine
11 ай бұрын
I use milliput with my Blue Stuff molds. It's much cheaper and the results are just fine.
@DanteYewToob
10 ай бұрын
A few tips for these kind of molds; after adding a bit of whatever release agent works for your material choice, pack both sides of the mold with material and focus on the troublesome details and undercuts. Pack the clay/dough into the nooks and crannies of both sides, add a ball to the middle and smoosh. This will ensure a consistent smoosh-fill. 2. After you do a few successful ones, weigh it including the flashing and squeeze out and use that same amount for each next batch to get repeatable results. If your best few had the right amount of material, just weigh them, and if they weigh 20g or whatever just make a bunch of 20g balls and then smoosh em all at once. (Edit: to clarify, you don’t want to measure the figure after clean up because you always want a bit of squeeze out. Ideally you want just a tiny bit of squeeze out on all sides, this ensures that you have a properly filled mold and no bubbles or gaps.) 3. A bit of compressed air works great to release them without pulling and squishing. Even a can of keyboard duster air works, or a small airbrush compressor and empty airbrush. Just get a small opening and gently blast some air into the crack to undo the suction and surface adhesion and it should pop out really easily without getting that gansta lean you mentioned. Lastly, I’d absolutely recommend foam clay! It works like clay, air dries and hardens into a material very similar to craft foam sheets, it’s a soft bouncy closed cell foam. Clay foam takes paint pretty well, it stays squishy and fun to use, and it’s safe for kids to play with and not break them or hurt themselves/each other by throwing them or whatever. A kid can learn to paint for cheap (a big bucket of foam clay is like 500gr for about 15$us and keep in mind that it weighs almost nothing. 500gr is a lot) and have fun playing with them and get excited and bash them or bang them into each other or whatever without making you cry as the kids destroy your expensive and hand painted minis! Hahaha one of the best parts about foam clay is that it sands and trims easily but the magic thing about it is you can smooth a surface with just a bit of water on a finger or cotton swab. You can just dip a swab in water and smooth over the mold lines or imperfections, and “glue” mistakes with a bit of water. This only works before it dries fully. For more info Kamui Cosplay has videos on it and works with foam clay a lot! I did all of the experiments myself with this technique when my niece wanted to make her own toys. She wanted some larger scale D&D minis but she wanted chibi and cute ones. So 3D digital sculpted a few myself and paid a girl on fiver to do a few more, we had these exact type of molds made and printed in engineering resin by a D&D print shop on Etsy and then we made hundreds of minis out of foam clay and they held up for a long time! She did dozens of game nights with her friends, she strode them loose in a big box or a backpack and they just took the abuse. I’d highly recommend it. She’s older now and using the same clay and techniques for cosplay too… it’s versatile stuff! Hope this helps! Good luck and I hope you get your army of tie dye marines!
@SouthOfTheStars278
10 ай бұрын
Absolutely amazing comment. Saving this info for later use
@danroberts007
10 ай бұрын
@@SouthOfTheStars278 agreed. We've got an expert here!
@gonarsan
7 ай бұрын
Thanks!
@camerongunter6232
5 ай бұрын
This is really fantastic. I’ve been looking for a way to teach my class how to paint minis while on the school’s budget and this video and comment may be exactly what I’m looking for!!
@BingoBangoBoom
11 ай бұрын
Archmagos Dominus Louise Cawl making the next generation of space marines over here.
@RossFlack
11 ай бұрын
Fun fact putting Super Sculpey into a cold place such as a freezer stiffens it up to make it less likely to deform. Also, you could pack both sides and then close it to have less squeeze-out.
@11Bbq
11 ай бұрын
This seems like a great way to practice painting space marines without worrying about ruining a bunch of overpriced minis. Also they’re cute.
@Armageddon-yt3so
11 ай бұрын
I was thinking the same thing!
@peterheinzo515
11 ай бұрын
you can always just prime over the painted mini again if you dont like your paintjob. you can do this a few times without visibly loosing detail. and then you can soak it for a few days in window cleaner and clean it with a toothbrush
@soffren
11 ай бұрын
@@peterheinzo515that's efficient, and I've done that a few times, but honestly this just looks more fun
@darthkek1953
11 ай бұрын
The same people do an Orc one so you could make a mini-game.
@nomore2226
10 ай бұрын
Over priced??? Not at all. I've never seen an over priced mini, except on forgeworld.
@yishumate
11 ай бұрын
"THEY'RE politically DUBIOUS..." 😂😂😂
@skylerthompson8046
11 ай бұрын
I had a moment of stunned amazement seeing you FREEHAND the Imperial fist. Hardcore, instant subscription, we love to see it
@roguehobbies
11 ай бұрын
I may do a little video in my patreon about the imperial fist yellow with some freehanding tips! People seem into it :D
@RyNsWoRLD
10 ай бұрын
Bruh, first time freehanding that imperial fist logo is genuinely insane
@justadummy8076
9 ай бұрын
It’s a relatively simple design…
@RyNsWoRLD
9 ай бұрын
@@justadummy8076 nevertheless, not easy to freehand
@kitoushi66
11 ай бұрын
That stone cold "she took the kids." had me rolling. lol!
@TheRealClutch1010
11 ай бұрын
Imagine for a moment, Ultramarine jello shots! For each unit you lose in a game, consume an Ultra-shot-marine!
@jimdawdy6254
7 ай бұрын
This needs to happen
@shyzunk
11 ай бұрын
I have several actual units made of DAS clay and greenstuff-like resin and I would caution that DAS clay will break over time when handled, unless the surface is soaked in glue to harden it. It is very porous so it will absorb it to decent depth. It shrinks a lot too, so I only used it for certain flat parts like cloaks and non-human minis like trolls. Once painted and on the table, you cant tell at a glance which of my minis are hard plastic and which are DAS. Also, regarding the amount of material and pressing, this seems quite excessive. My general approach was to just fill each half exactly with material , then add a little bit to the center to force the two halves to merge and create pressure on the details, but minimize material waste, needed pressure and mould lines. Generally you could produce ok result pressing with hands only.
@Pershoreify
11 ай бұрын
Brb buying play doh stocks
@makaero1504
11 ай бұрын
Just out here appreciating the effort that went into the play doh dreadnought that featured in 2 seconds of footage
@SigmarUnberogen
11 ай бұрын
Love DIY hobby friendly videos like this and would love to see more of your personal creations/paints vintage or new!
@Greybeardstavern
11 ай бұрын
“So I went the complete opposite and tried to make one out of a soft material……clouds” made me laugh out loud at work! 😂
@Makorze
11 ай бұрын
Ah Yes - the Cloud Space Marine.... **cut to Corvus Corrax ripping a screaming Word Bearer apart as a mass of Black Smoke**
@GreenLightSolarOG
11 ай бұрын
It is such an unexpected delight to watch your videos. You’re editing and humor just gets better with every one. So many great little lol bits in here and you have such a great positive vibe. Thanks for making some really unique content. Excited to see what you do in the future.
@trance_trousers
11 ай бұрын
I've built models before (plastic, card, and metal) but I'm not into tabletop gaming at all, and then this video popped up in my recommended. Your space marines turned out pretty good and your miniature painting skills are amazing!
@foxsakecrafts
11 ай бұрын
Your videos are so incredible! As a crafty person who’s partner paints WH (that’s always been cool but not a pool I’ve wanted to dip my toe into) finding your content has me building my first kit and being so engaged by all the creative ways you enjoy the hobby! Literally inspiring 🥳
@ModernSynthesist
11 ай бұрын
So when doing this kind of press mould stuff for miniatures, my tips would be: 1) Use Apoxie Sculpt, a different type of epoxy putty, as it's cheaper than Greenstuff but takes detail well 2) Demould the miniature when the epoxy has fully set. It might be easier if you insert a piece of coat hanger wire into the putty in the mould when it's still soft, then you can use this to leverage out the finished miniature when is set.
@Maartwo
7 ай бұрын
This took me back to the time my uncle would cast Space Marines with lead. Fun times, although I think my age expectancy might have dropped by handling those lol.
@HolyMith
11 ай бұрын
That little spinning shot with the IF and the shorter RW marine looks like the set up for some kind of goofy buddy comedy about two marines that were accidentally dispatched on the same mission and had to team up to take down a chaos cult or something 😂
@kennymartin5976
11 ай бұрын
Honestly, not only is this a fun little project to mess around with, this is a great way to test color schemes and painting techniques. Bake a batch of sculpty, and you can practice on a bunch of clay minis to get your scheme down and then use what you've learned to apply to your expensive GW models
@roguehobbies
11 ай бұрын
I agree! This is in no way a "let's replace our armies with these" but just a really cool little experiment and honestly a lot of good fun for those who wanna practice or try something out!
@artistpoet5253
11 ай бұрын
Endless test models for paint schemes! YES! PLEASE!
@TwistedNerves
11 ай бұрын
I am just vintage enough to love both those retro space marines, and Play-doh! It is the perfect combination. I TOTALLY would have had the Play-doh Space Marine Manufactorum!
@antonjonsson424
11 ай бұрын
this is so insane and unhinged it absolutely demolishes the norm and storms off into the territory of original and VERY interesting content. Thanks!
@roguehobbies
11 ай бұрын
Glad you enjoyed it 🤣
@nickkohlmann
11 ай бұрын
Exactly! Super refreshing while also informative :)
@anthonywaggett9317
11 ай бұрын
Nice one Louise, Super Sculpy is used by a lot of doll makers I believe but one product you may want to try is Apoxie Clay which is a 2-part epoxy clay that hardens naturally in a mater of hours and is very resilient with no shrinkage. You may have seen Apoxie Sculpt being used by kit-bashers but I believe the Clay is a softer material and is recommended by the manufacturer for stamping/impressions. If you want a rubbery little guy then there is a 2 part resin that produces a rubber (if I remember the name I will edit this) but this needs some adapting of the mould for a 'Pour' hole and vents and finally the old silicone bath sealant - squeeze it out into a tub of water and dish soap, massage into a lump then use like the Play-Doh - I use this for cheap and easy moulds for puppet eyes and it holds up really well (my moulds are over 3 years old). Keep up the weird videos.
@mortarionsmuffincompany1001
11 ай бұрын
Normally enjoy the content from this channel but this episode was extra fun and enjoyable 😊, the "she took the kids" comment put me over the edge 😂
@notreallydavid
11 ай бұрын
secondeded
@wwiiinplastic4712
11 ай бұрын
A suggestion on that mold and using firmer materials like the Sculpey and Fimo: can you drill a small hole at the bottom of the mold for some of the excess to squeeze out of? That might make it easier to get them closed with having to resort to a vise each time. And the DAS was definitely too wet; I think the curing time is too long on that but I think they have other clays that might work better. NARA makes a flower clay for sculpting petals that stays flexible and can bend up to 360 degrees which might open up some interesting ideas if one was to go beyond space marines.
@nekrataali
11 ай бұрын
Yup these needed vents and petrol jelly. Green stuff can be used in molds, you just have to let it cure for a few hours before you try and take it out. Squish molds in general aren't that great for minis in general, because often minis are too complex to be cast using one mold. You have to use multiple molds for the different parts and you end up with a lot of flash.
@apjapki
11 ай бұрын
Anyone who has tried to unblock their child's playdough extruder is not surprised that it dried out rock hard.
@alexmadrigal9703
11 ай бұрын
I love that a good or great paint job will elevate a sculpt that might not be the "best" or most detailed. These are glorious.
@glitteringpony5121
11 ай бұрын
Love the video so much! Petroleum jelly is the best mold release, if you want to try FIMO again. Also you can boil Super Sculpy to get it to harden. :)
@mindoftheswarm7
11 ай бұрын
There is another material. It’s a special kind of clay/playdoh that is used in Asia. It is soft like playdoh but stiffens when exposed to air. You could try this at different stages of stiffness, it will also dry into a permanent cast within a day. They call it “Nien Tu” in Mandarin.
@garypilkington2
11 ай бұрын
Wow! They look seriously Oldhammer when painted. Fun stuff! Thanks Louise!
@roguehobbies
11 ай бұрын
Glad you like them!
@garypilkington2
11 ай бұрын
👍@@roguehobbies
@Kubrzesz
11 ай бұрын
"Squeezing out Space Marines", sounds like something an Iron Warrior would say about Daemobculaba
@animeator
11 ай бұрын
This is just... So much fun. thank you
@roguehobbies
11 ай бұрын
Glad you enjoyed it!
@animeator
11 ай бұрын
@@roguehobbies hard not to! Had some of my favourite things. Like clay being smooshed and paint getting used.
@davispeterson1876
11 ай бұрын
That playdough dreadnought at the end was a thing of beauty
@roguehobbies
11 ай бұрын
He's my favourite
@thefreik
11 ай бұрын
I think mixing Milliput and Greenstuff might work well... Milliput is much softer than greenstuff and when you mix them you get something that has properties from both materials. Then perhaps letting them cure inside the mould for an hour or two (but not until they are completely solid) before trying to get them out. If I had a 3d-printer or a 3d printer I would try this. I use this mix whenever I use blue stuff moulds and it works really well (compared to only using greenstuff or miliput) Cures rock hard in the end as well...
@richtheunstable3359
11 ай бұрын
Agree milliput and green stuff is a good mix for two part mould squishing
@619Slipk
11 ай бұрын
As the air drying clay is water based most greasy things can help with the release. Vaseline for example. Even cooking oils and moisturizers that are oil based work if you feel like improvising
@flynnhammer5311
11 ай бұрын
Aves Apoxie Sculpt would be good to try, but would suggest letting the polymer clays cured for an hour or 2 before de;molding them
@radwolf76
11 ай бұрын
After having watched several OOAK doll making videos with the rest of my household "I didn't have X so I made one out Apoxie Sculpt" is a regular meme phrase in my house.
@VideoGameNtn
11 ай бұрын
This was genuinely a fascinating video. Thanks for the work you put in putting all this together and subjecting yourself to painting play-doh!
@thelonelybolter8245
11 ай бұрын
That paint job is incredible!!!! love it :) Curious if a 50:50 milliput:greenstuff mix would work well? The milliput makes the mix a lot softer and easier to work with
@frannyfranfrancis
11 ай бұрын
It will
@gi1dor
11 ай бұрын
Why even add greenstuff? Just use milliput, it would be softer
@nekrataali
11 ай бұрын
The greenstuff just needed to cure for a few hours before taking it out of the mold. I use pure greenstuff with oyumaru/bluestuff and found its best to let it sit long enough to harden so it doesn't warp when you take it out of the mold, but is soft enough you can practically peel away the flash with your fingers.
@alexsutton5691
11 ай бұрын
Just a thought, my wife has the same issue of trying to get cake fondant out of moulds too. A quick blast of cake release spray helps A LOT with this and doesn’t deform the model. 👍
@cyrilabati8705
11 ай бұрын
I realy like the video 🙂 Try talcum powder or vaseline lip balm as a demoulding realase agent depending of what kind of clay you use, talcum works great for fimo.
@activeguy2008
11 ай бұрын
Cooking oil spray works for me, mainly because I don’t own the other two lol
@Kuriousape
11 ай бұрын
Cornflour?
@Debbiebabe69
11 ай бұрын
Actual industrial mould release is pretty cheap, you can get a full tin of it for less than the price of a couple of space marines.....
@WardenOfTerra
10 ай бұрын
Pro tip; put green stuff in boiling hot water until it's super soft, take it out and press it, and then dunk the entire press into cold water.
@L3GHO5T
11 ай бұрын
I spend an hour or two every night hunting eBay for new oldhammer stuff 😂
@MartinKincl1993
9 ай бұрын
Have the little box for old school termies and genestealers and you can make yourself an adorable version of Space Hulk.
@andli
11 ай бұрын
Louise, your personality and production value is a 9.5/10 ⭐
@brianart7019
11 ай бұрын
you painting skills are so good you could literally paint a rock to look like a legit space marine and it would totes look like a legit space marine.
@Waterratt4344
11 ай бұрын
Very cool, the 3-D box idea can lend itself to other areas as well! I was thinking that maybe using a quick clamp might be a good and inexpensive way to squeeze the mold together instead of a vise.
@ellesse3862
11 ай бұрын
I like how you ended up with scale creep, that was a funny added bonus. I honestly thought this'll be pants but no, professionally painted makes everything look good. This gadget wouldnt have supplied my friend with an army when he was little, he'd have just eaten his playdoh marines, he had a taste for forbidden foods .. then grew up to resemble an ogre, the signs were there all along.
@pinetreestudios
11 ай бұрын
I love how this can be used for getting young new painters into the hobby without spending a fortune on fancy new models but most of all I love how the ex GW employee is promoting the recasting of GW products they must have really done the a number on you when you found a reason to leave (if you left by your own choice)
@sleeplessknight99
11 ай бұрын
There's a reason why GW's newer painting videos only feature the artists hands and not their faces.
@s1mp50n4
3 ай бұрын
I'm pretty sure this video made me aware of Necromolds. The first major expansion and restock of the base game just released at the beginning of the month and international shipping should be opening up soon towards the end of the month or start of next month if you want to get your hands on the game. My copy just arrived yesterday and I came back here to rewatch since I'll probably try making permanent versions of some of the minis and wanted to see what you'd settled on for clay and I might want to figure out adding that space marine to my game.
@BingoBangoBoom
11 ай бұрын
I think the biggest thing that stands out to me about this process is how the space marines aren't GW space marines and in no way impacting anything they do. It's almost as if you just found a fun thing to play with and are having fun with it.
@midorimacaw
11 ай бұрын
"She took the kids." This line may have been enough to make me subscribe to the channel.
@killteamnarrative
11 ай бұрын
This is probably the most hilarious video yet. I love all of it and how much fun it was. The icing was definitely the "advertisement" in the middle. Well done! 😁👍
@emilyjadeoliver
10 ай бұрын
I'm six minutes in and I have to say, this video is a cinematic masterpiece. Thank you for being such an entertaining entertainer. Truly.
@kkrup5395
10 ай бұрын
You are goofy
@NinjaTurtle-qh1xy
11 ай бұрын
Your painting skills are phenomenal, you need to do more painting videos/tutorials! 😮😁
@roguehobbies
11 ай бұрын
Thank you!
@alanbrooks1200
11 ай бұрын
5:31 *an extremely disheveled emperor walks the housing estates of neo Glasgow* “She’s turned the weans against us”.
@roguehobbies
11 ай бұрын
She turned the weans against u aye?
@jordantaylor2991
11 ай бұрын
Love youre energy. You're just what this hobby needs. Thanks for being awesome
@roguehobbies
11 ай бұрын
Thank you I try 🥹
@gonarsan
7 ай бұрын
When you made the candle space marine I thinked that your next step was to make a "lost wax" casting with bronze or another melted metal like the traditional sculpture method. Great video, very fun! ❤🎉
@SimeonCogswell
11 ай бұрын
Louise, your enthusiasm is infectious! This was so much fun, I can't wait to try it out.
@deandarvin553
11 ай бұрын
The commercial/domestic despair was an immediate sub.
@chriscasc1984
11 ай бұрын
Your painting skills are amazing! You turned a frog into a prince ❤
@niteliniN
11 ай бұрын
Some old advice I've heard from clay molds for minis using Play doh, coat the mold faces with Some oily product to make your life easier when you have to remove them from the cast. Baby oil I believe is the one they were using on that video.
@carlstanford7607
11 ай бұрын
Mix milliput with green stuff to make it softer. Clamp and leave to harden. It’ll work. Hilarious and fun video. Great editing and great painting
@keithchristmas7315
11 ай бұрын
Milliput/green stuff mix is phenomenal stuff. There's times you'd prefer one or the other, but for general use it's brilliant
@kaneblaireau4864
11 ай бұрын
That or just Milliput are definitely worth trying!
@activeguy2008
11 ай бұрын
Spraying the mould with cooking oil before hand makes the green stuff mini literally fall out of the mould when you open it. I’ve done this countless times with high elf horse tails, because buying 2nd HE horses never come with tails haha
@rich1051414
10 ай бұрын
If you cover the marines in a base coat of acrylic matte medium, you don't have to worry about the weird texture. That will give them a coating that almost feels thirsty, and is a joy to paint. 'Liquid green stuff' is also an option for the base coat, but meh, acrylic matte medium is very cheap and does the job. In the past I have diluted the medium a bit and dipped them, then set aside to dry. Super quick.
@capnskustomworks
11 ай бұрын
That is just so cool!!! I want to make an all Play Doh army now! Hahaha! Your paintjob makes them look almost indistinguishable at a glance, really nice work!!!
@volkarve
11 ай бұрын
The commercial was the funniest thing I've seen a good while. Also the photo bombed dreadnaught made me spit my drink out lol. I'm definitely going to try these at home
@capt.mannerings8095
11 ай бұрын
Totally loving this. Need all the moulds. I think they are substantially transformed!
@solidussmith
11 ай бұрын
Was merely curious to see the results from just the title... Stuck around for the whole video because this was super entertaining. Sub earned :D
@roguehobbies
11 ай бұрын
Glad you enjoyed!
@gribblegreeble
11 ай бұрын
Adorable! And the play-doh / sculpty minis are cute too. The great thing about RH is how much your personality and artistic approach are on display with the projects. They're fun, colorful, quirky, and unique. Keep up the great work and direction the channel is going.
@steampunker7
9 ай бұрын
One of the real advantages I could see for something like this is making minis you can practice your painting skills on without worrying about damaging or ruining the more expensive figures.
@MrFiremagnet
11 ай бұрын
Dear Rogue, it's better to fill the mold with green stuff bit by bit (press firmly to get good details) until each half is filled, than a little on one part to make them stick together and only after that stick both halves together. Well at least this worked with blue stuff with lego casing. Hope this helps.
@marcelogonzalez8547
11 ай бұрын
"I want Space Marines" "We have Space Marrines at home" Space marines at home...
@doomtubemonkey
11 ай бұрын
So glad you showed off the candle marine 👍🏻I'm going to try making one with sprue goo 😅
@thegentlemanreturned
11 ай бұрын
Might I suggest that you use baby powder inside the mold to make the play-dough (or any material) release easier.
@mrmaxwell0701
11 ай бұрын
Conclusion: you're such a talented painter that you could paint any monstrosity and still get a cool result
@ArtsyImagination
11 ай бұрын
Perhaps worth trying DAS again, but rather than pulling it out as soon as you've pressed, letting it dry fully. Since paperclay is airdry and it shrinks as it dries, it would pull itself out of the mold and you wouldn't have any lean or distortion. It would just take a little longer. You could also just use an exacto knife to cut any fiddly remains.
@f4lloutgaymer
11 ай бұрын
What a glorious paint job you did with these. They do look very similar to the old 90s figures. And your wonderful paint work makes them even better. ❤ Be Excellent to each other and Party on. 🤘🎸😎🌈
@problemecium
11 ай бұрын
So after the first couple minutes I was like ooooo, new Warhammer game mode idea: that box is a canon mechanic, some kind of cloning vat or whatever, and part of your struggle to win is trying to outcompete your opponent in unit production... and then behold, Necromolds did it xD
@problemecium
11 ай бұрын
8:15 perhaps you could spray vegetable oil or something on the inside of the mold first to make it more non-stick
@weatlyjustweatly133
11 ай бұрын
Cant wait to indulge in some bootleg criminal activities
@lssjbrogeta
11 ай бұрын
Man this would be a cool way to create "stone" or "concrete" statues for terrain, the little imperfections would basically be free weathering of the chipped "stone" and it would be really easy to add even more damage from stray shots or shrapnel.
@BingoBangoBoom
11 ай бұрын
What the hell is a space marine?
@roguehobbies
11 ай бұрын
ur a space marine
@BingoBangoBoom
11 ай бұрын
@@roguehobbies no u
@matthewbagley4287
11 ай бұрын
@bingobangoboom, I here there's a lot if them in Sugs's discord.... if only we could work out how to join 😢
@Draezoth
11 ай бұрын
That parody of an old toy advert was peak comedy. I almost spit out my water.
@joeburns4354
11 ай бұрын
That Play-Doh Dreadnaught was kinda 🔥 in a campy, cartoony way. I say make a few more Play-Doh units like that. Then you can have a full "Toon" Combat Patrol with your shorty Play-Doh marines.
@mondriaa
10 ай бұрын
letting them dry a bit or even almost fully dry before pulling them out of the mould would help prevent some of the deforming, back in Ye olde days I used a lot of homemade press moulds, mostly for smaller stuff like guns and details and letting them dry really helped a lot , in part of the shirking it will come loss easier and its more firm so less bendy, couple of wires or sprue pressed into the center also helps with that. good luck looks like a fun project
@natehaux7575
10 ай бұрын
I started with the third edition box, it was nice to see the old molds again. thank you so much.
@carpemkarzi
11 ай бұрын
That was surprising an fantastically satisfying.
@chrisgutteridge
11 ай бұрын
I've done some casting with greenstuff and thermoplastic (aka bluestuff). I found that what worked best was to push a bit of green stuff carefully into the extremities, then fill up the main space on each side until it only slightly came higher than the mould and then, yes, clamp it together. The results were... OK but still had more flashing than is ideal.
@toooldfortwowheels2048
11 ай бұрын
Only Sugs can avoid the legal nightmare of 3D printing GeeDubs and simply print moulds for Play Doh Marines... Love it!
@gregoriancatmonk6904
11 ай бұрын
I like the look over the normal space marine p, it gives them a character of their own that goes beyond just a different paint scheme.
@christophbarra1841
11 ай бұрын
Super Sculpey has been a part of my life for...uhhh...I dunno 20 years by now? You can make ANYTHING out of it. That stuff is a gift from the Emperor himself!
Пікірлер: 1,5 М.