Thanks for the tip on cutting and popping out the ends to fit with crash bars!
@HyperRidemx
5 жыл бұрын
oh I likey!!! spending the day in the garage with Josh! I always walk away with more tips and trick products!
@MVDBR
5 жыл бұрын
Mwah 😍😘
@MrEnduroVlogs
5 жыл бұрын
So i saw this and the one after this upload of you saying how soft they are compared to the original lock ons. So i took your word and bought the grey soft ones. Holy shit man they’re so good.
@MVDBR
5 жыл бұрын
They are ay! Freakin sweet grips 🤘 Thanks for commenting bro
@MrEnduroVlogs
5 жыл бұрын
MVDBR Enduro no worries champ. I look forward to your vids.
@inthepumpkinpatch5383
5 жыл бұрын
I just use orange spray paint I get my bike wet all the time sometimes they can be difficult even after you've cut them off. I thought you were getting ready to start a war but then I realized there's probably no 2-stroke guys watching this video because it's about bike maintenance 😈
@MVDBR
5 жыл бұрын
Haha yeah 2 stroke riders haven't got money to waste on nice grips they're always saving for that next top end 😉 These are good grips man you should give em a crack 🤷♂️
@JoeJoeMoto
5 жыл бұрын
Nice mate. Love my lock on grips too!
@MVDBR
5 жыл бұрын
So good 😎
@motojunkie7243
4 жыл бұрын
I went to burleigh and grabbed a set of boots 2 wkds ago, and also nabbed a set of these because of your video. Thank you so f#@ing much, best grips yet. Very solid, good grip, and large enough to delete the odd whiskey blips👍🤘 cheers mate, need a new trial video....
@MVDBR
4 жыл бұрын
Oh yeh awesome stuff mate they are the goods aye? We love em. Thanks for dropping back to leave a comment man, appreciate it!
@NPTTNP
5 жыл бұрын
Looks sick Josh. Good job mate 👌
@MVDBR
5 жыл бұрын
Cheers bruz 🤘
@MileMunchinAdventures
4 жыл бұрын
Finally purchased some today, the ends were a little different to yours. Mine had aluminum ends, which made it bloody difficult for the throttle side I use bark busters. I found a work around by cutting off the entire end including the Aluminium bit. It wasn’t ideal, next time I’ll get the same ends as yours, now I know there is a difference. They are a great idea and went easily other then the aforementioned issue. Thanks for the video.
@MVDBR
4 жыл бұрын
Oh true, to be honest I didn't know they had any with aluminium ends 😟 Glad ya got it sorted though, they are awesome grips 👌
@ianferrier235
5 жыл бұрын
Nice review Josh
@MVDBR
5 жыл бұрын
Thanks mate 👍
@JorgeGonzalez-ei6ft
5 жыл бұрын
There sic. Im getting them now for my kx250. Thanks 🤙
@MVDBR
5 жыл бұрын
Yeah boi 👌
@KLRmurdercycle
5 жыл бұрын
Cool product
@MVDBR
5 жыл бұрын
They really are. Thanks for watching mate 👌
@aaronsanchezz
5 жыл бұрын
How do you like the rogue grips compared to the emig? I love the look of the emig but I hear they are hard so I'm thinking of going with the rogue like you did but not sure
@MVDBR
5 жыл бұрын
We both LOVE the Rogues mate, definitely recommend. Way more comfortable! Cheers.
@rhys9
5 жыл бұрын
What I'm using too!
@MVDBR
5 жыл бұрын
Good stuff 👌
@corbindanylycha5246
5 жыл бұрын
Hey mate, what sort of levers do you have on the 500?
@MVDBR
5 жыл бұрын
Just stock Brembo levers bro, cut the ends off so they're 2-finger width. Love em like this. And I recently painted the ends black so my fingers don't go black all the time from the aluminium (I cut the finger tips off my gloves)
@Buzzer-ht4vq
4 жыл бұрын
What I've read is that these ODI Rogues are some of the largest in diameter out there (large hands), I've got some on the way!
@MVDBR
4 жыл бұрын
They're maybe 1 or 2mm larger than other grips man but there's really not a lot in it! Nevertheless they are great grips I don't think you'll be disappointed
@shanehallam1487
5 жыл бұрын
I run the same abd there a thicker grip is what i like
@MVDBR
5 жыл бұрын
Yeah I think I'm gonna like these over the Emigs. Thanks for the comment 😎
@paulc3517
3 жыл бұрын
Thanks!
@crugwrf
5 жыл бұрын
Looks like my next purchase thanks matey 😎👍
@MVDBR
5 жыл бұрын
👌💪
@crugwrf
5 жыл бұрын
@@MVDBR i think they should sponsor you that would be good 😎👍
@MVDBR
5 жыл бұрын
@@crugwrf yeah so would winning the lotto :) Hey I commented on your new vid but it's not there now wtf. Goddamn KZitem marking stuff as spam again I guess
@crugwrf
5 жыл бұрын
@@MVDBR i got an email saying your comment and it was much appreciated but it hasnt shown up on video i dont know why 😎
@MVDBR
5 жыл бұрын
@@crugwrf have a look in the creator studio next time ya on the PC, in the comments section it's probably been put in the 'likely spam' folder. I just checked mine and there were a few legit comments held there as well, their spam filter needs some work :(
@chazzthaspazz4475
4 жыл бұрын
Gettin these from Walmart for my yfz450r wow these stock grips are just a absolute nightmare
@MVDBR
4 жыл бұрын
👌
@FitandFabinvestor
4 жыл бұрын
Do these grips dampen engine vibrations?
@MVDBR
4 жыл бұрын
Nah not really
@Jimtegra
4 жыл бұрын
nice bike
@MVDBR
4 жыл бұрын
Thanks, we love em :)
@ridercun1
2 жыл бұрын
4:00
@sean.g4516
3 жыл бұрын
I hate that they only come in black for dirtbikes?
@MVDBR
3 жыл бұрын
Yeah I think only the Emigs come in different colours.
@BrokenSprocket
5 жыл бұрын
Great job Josh I have the Emig grips on my RMZ they are good but I find them hard on your hands those one's look like they are softer so they probably better . What do you mean 2 stroke piece of shit???? lol...
@MVDBR
5 жыл бұрын
Yeah I think these will be a better grip mate definitely a bit softer 👌 And I wasn't actually having a dig at 2 strokes just those cams are no use to me haha but take it as ya will no harm in starting up a bit of a stroke war 😅
@BrokenSprocket
5 жыл бұрын
I'm lucky I like both strokes 😉
@teamneveadventures9528
5 жыл бұрын
Nice
@MVDBR
5 жыл бұрын
Cheers ears 🤘 Top bit of kit
@teamneveadventures9528
5 жыл бұрын
I have to ask how ya did the intro into all ya vids..... maybe a how to guide
@MVDBR
5 жыл бұрын
@@teamneveadventures9528 just a lot of dicking around in Vegas Pro, I think I downloaded an intro template from a website and heavily modified it. I doubt if I could do a how-to cause I wouldn't be able to remember exactly. That's why I haven't done a new one yet hahaha cause it took me so long to make 😁
@teamneveadventures9528
5 жыл бұрын
All good josh all good
@MVDBR
5 жыл бұрын
@@teamneveadventures9528 do you use Vegas? I can send ya a link to the site where I got the template if ya want 👍
@lukestringer2177
5 жыл бұрын
It seems a rubber tyre ... subliminal message 🙄😄 -Motoz Tractionator RallZ Tire-
@MVDBR
5 жыл бұрын
😅👍
@behindbarswithnoodles
5 жыл бұрын
bit to quick and easy to install , won’t even work up a thirst hahaha 🍻 🍺
@MVDBR
5 жыл бұрын
Haha dunno about you noodles but I'm usually thirsty before I start 😎🍻
@behindbarswithnoodles
5 жыл бұрын
MVDBR Enduro yeah i can’t work on bike without having one while looking at the bike, then few more working on it 😜
@MVDBR
5 жыл бұрын
@@behindbarswithnoodles how's the Husky going anyway no dramas?
@behindbarswithnoodles
5 жыл бұрын
MVDBR Enduro going great 👍 had awesome ride last weekend !! pretty muddy and slippery , some big hills was great fun. ohh and lots of beers 🍺
Пікірлер: 70