me : *"I think I'll stick to the beginner method"*
@YouCuberr
Жыл бұрын
Dont stick to begginer method
@Mistyre
Жыл бұрын
@@YouCuberr ok
@wrmmagglev9192
Жыл бұрын
Nah dude just learn eg you will never have to deal with rotations
@Mistyre
Жыл бұрын
@@wrmmagglev9192 im focusing on 4x4 and 3x3 more than the 2x2 now but thanks for the advice
@wrmmagglev9192
Жыл бұрын
@@Mistyre for 4x4 and 3x3 watch jperm for 2x2 you can stick to ortega or change to cll
@eitifrie
Жыл бұрын
What about R2, T or J perm, R2?
@toshio3772
Жыл бұрын
thats slow as
@licalvin4738
Жыл бұрын
But T or J Perm is so fast and R2 is easy to do and you can do it instead of learning a new alg
@toshio3772
Жыл бұрын
@@licalvin4738 no, cancelling into t or j perm is faster than doing a full R2 at the start
@licalvin4738
Жыл бұрын
@@toshio3772 but u know Jperm will get mad if you don’t use his alg
@yiaq3551
Жыл бұрын
@@toshio3772 You don't do a full R2 at the start. It cancels with the R at the start to become an R', and then you carry on with the T perm and finish with a full R2. R' U R' U' R' F R2 U' R' U' R U R' F' R2
@kulmogd969
Жыл бұрын
Thank you so much, i was have this problem so many times!
@ritzall770
7 ай бұрын
when he says ''seeing that makes my eyes bleed. I would be like ''So, why do you do it. I doesn't make your eyes bleed
@justvalentino12341
11 ай бұрын
Me just doing a t perm and y perm until it’s finished cus this ahre the only ones I know for 2x2
@GoofyAhhYtShort
9 ай бұрын
Lol
@Suneiscoolalg
2 ай бұрын
Me who invented the Ortega 2 method laughing
@aaronanimate7198
Жыл бұрын
this really helps me, i was gonna switch the pieces then i found this vid
@iavanfedeli810
9 ай бұрын
T perm with R' instead of R at the beginning and a R2 at the end is what I do and I recommend it
@BenTheCuber
Жыл бұрын
Me thinking I know all of the big cubing channels: Eddievak: hello there
@dorito6615
10 ай бұрын
Ty now i know what X notation means in cubing
@dalongbean684
Жыл бұрын
Tysm this helped me a lot
@pranavdandgaval
Жыл бұрын
just do R2 + Jb perm which results in Jb lerm just replacing starting R with R'
@shang_psycho7414
10 ай бұрын
Nice, doing R’ saves time rather than doing R2then R
@AvgeekRPLL
5 ай бұрын
After an x2 move i dont do a j perm but a t perm 😂
@PlaZmaRaptor
9 ай бұрын
If im not wrong, thats basically the wide move Ja per. Upside down
@peparsflygplan
9 ай бұрын
Thx
@KidDoesCubing
Жыл бұрын
U could do R’ U R’ F R U R’ U’ R’ F R2 U’ R’ U’ R2 It is long but easier to memorise
@tgs1536
6 ай бұрын
the tutorial needs a tutorial
@mr.theGOAT420
6 ай бұрын
Its better to cancel into a tperm
@MarAhRuvYT
7 ай бұрын
Thx bro, i would flip the cube if i didn't find this video
@happygameshide2647
Жыл бұрын
I would do the regular one
@invisibleperson1262
Жыл бұрын
life changing-
@averagecuber4
Жыл бұрын
Thanks I really needed this
@qmg2064
3 ай бұрын
you can also do a T perm starting with an R’ and ending with R2
@Cubing_Charlie
Жыл бұрын
I do jperm but the first move is R' instead of R
@ignDart
Жыл бұрын
if the D layer bar is on front, you can also do R2' F2 U' R2 U R2' U' R2 U R2'
@LNP618
Жыл бұрын
that looked like magic.
@CosmoTheCommander
Жыл бұрын
If u replace the r2 to the last it would just be a adjacent corner swap
@HiveProkazuMC
10 ай бұрын
Put the 2 unsolved pieces at the back of the cube with the solved layer at the bottom then execute this algorithm: R B R F2 R’ B’ R F2 R2 U (10 steps)
@Ronny77
5 ай бұрын
I found this slowing my times so i found a solution on my own - R' (T perm without the first move) R2
@Multitalented_dude
9 ай бұрын
Good tutorial ❤🎉
@EKTAGUPTA7
7 ай бұрын
Motivates me to do 2x2 solves. I have a mgc 2x2
@theLASK
Жыл бұрын
Perfect practice for my 1st competition
@phy14
Жыл бұрын
THANK YOU SO MUCH EASIER J PERM
@Americanoliver
Жыл бұрын
Thank you Eddie Amazing strategy. Been subbed since 13k subs!
@novannn7898
Жыл бұрын
wow 13k seconds???
@Sumobam09
Жыл бұрын
What i do is an x2 rotation then "R U2 R' U' R U2 L' U R' U' L".
@CosmoTheCommander
Жыл бұрын
Nah bro
@TrigonometryX
Жыл бұрын
Thanks
@Drone_and_cubing_time
Ай бұрын
Thanks so much
@caspermarczynski5267
6 ай бұрын
Another way in 10 moves: put the two swaped corners in the front to start/ R,U',R,U,R2,F2,R,F,R',F2
@watchf
9 ай бұрын
Wow it saves 3 moves and a rotation 🫤
@andrelopez1666
Жыл бұрын
Im not a rubix ronald😭😭
@kubikubik9756
Жыл бұрын
I just do R2, T perm R2
@acrobateb
2 ай бұрын
That problem Was horrible thanks😅
@kentshen8766
Жыл бұрын
you can also change the first R into R’ then add an R2 at the end
@pablo2203_
6 ай бұрын
Or a t perm but start with a R' and end with R2
@leszekryniec7054
5 ай бұрын
Me doing an A perm...
@markosth09
Жыл бұрын
I use R' U R' U' R' F R2 U' R' U' R U R' F' R2 for this case. This is basically R2 T perm R2 but R2 R cancel to R'. It is 15 moves instead of 10 but for me it is faster.
@jerscloudxoroadto2054
Жыл бұрын
Actually you can start with R' and end with R2
@dasilvaferreiranunof1a119
Жыл бұрын
I learnt the 2x2 in 6 minutes lol and i used my 4x4
@Okami_gris
9 ай бұрын
T perm beginnings with R’ and ending with R2🤨
@thegaming_kenzolol2861
Жыл бұрын
Me watching these shorts and pretending that I understand even tho I don't understand anything: mmm god technique good technique
@joshjackson1701
9 ай бұрын
I do a j perm but start with R’ and do R2 after
@elijahanderson4525
9 ай бұрын
What’s the easiest or fastest algorithm for two sides and no bars😊
@galarianjay
10 ай бұрын
I’ve been doing it as a t perm but R’ at the beginning instead of R. This makes me a dripped out Rubiks Ronald
@fibon5432
Жыл бұрын
We need one for diagonal swap pls
@Sumobam09
Жыл бұрын
For that one, make sure the diagonal swapped pieces are on the top the do this algorithim "F R U' R' U' R U F' R U R' U' R' F R F'"
@fibon5432
Жыл бұрын
@@Sumobam09 dude i mean like the video shows it in the bottom
@SidsToaz
8 ай бұрын
Me: does t perm but starts with R’
@ananiaguliashvili9993
10 ай бұрын
Or do the T perm but start with R' instead of R
@Leptronium
Жыл бұрын
Don't extend it too much. R2(T perm/J perm)R2 (I preferred T perm as it's smoother).
@LNP618
Жыл бұрын
R2 + R = R' what he did is cancel the R2+R into an R' and then continue with the alg
@iplaygamez2244
5 ай бұрын
Another way scramble the cube and solve it again
@DannyDimeProdz
Жыл бұрын
this is to much for my brain i can’t even memorize the regular algorithm
@nigelhateclock
Жыл бұрын
Small Brain
@TrainingCuber
Жыл бұрын
tiny brain
@kladklowp1022
Жыл бұрын
Amoeba size brain
@TrainingCuber
Жыл бұрын
@@kladklowp1022 e coli size brain
@pengusplayz5756
Жыл бұрын
Negative 2 inch sized brain
@IamJosh26
Жыл бұрын
Hey my last name used to be Ortega… hm
@princeezekiel242nd9
Жыл бұрын
Wish all can do faster even their cube is not a speedcube
@seb_bock_cubing
Жыл бұрын
Just do T Perm but replace the R at the start with R’ and do a R2 at the end
@speeedycuber
Жыл бұрын
T perm but starting with R'
@tanjiro_kamado98
Жыл бұрын
Didn't you just do the rubix Ronald algorithm
@rudranshsoni8548
9 ай бұрын
Guys I created my own method in which my top layer is finished and Then I do JPERM This is JPERM 2 by 2 algorithm
@bygoneb0i751
6 ай бұрын
I just do an R’ and then the rest of a Jperm cause it’s the same as if I did an R2 then a Jperm
@mamayjonel
Жыл бұрын
i solve the 2x2 like solving the3x3
@bavankarthik7634
Жыл бұрын
You can just do R2 and do tperm and do a R2 to finish it
@mewtu5817
Жыл бұрын
Am i the only one that is looking on the 12x12 instead of the 2x2
@chesschad81
5 ай бұрын
But...but...what if I use CLL?
@justov1711
Жыл бұрын
solving these include math? and areas? i give up
@CocoPlayzWasHereLol
5 ай бұрын
i do a t perm, not a j perm.
@calebmaupin3827
10 ай бұрын
That helps a lot but I just am going to use R2 Tperm R2
@cythism8106
9 ай бұрын
That really isnt that bad. For the first trigger, you can do it the same as the first trigger in the v perm. And the fingertricks line up niceley for the R2 at the end. It does have a soft regrip, but its better than an x2.
@tr_walkway1933
10 ай бұрын
Don't do J perm, just do J perm.
@prod_by_slvg
Жыл бұрын
just turn it upside down bro
@Randomstuff16756
Жыл бұрын
You can just do an R2 and then jperm
@lmctoons
3 ай бұрын
Can you do the same kind of tutorial but when you end up with a y perm on the bottom???
@Nbafan1202
Жыл бұрын
What about this algorithm? R’ (jperm without the first move) R2
@flaggingcheesy9221
Жыл бұрын
What about R2 (J Perm/T Perm) R2?
@CosmoTheCommander
Жыл бұрын
I DIDNT EVEN KNOW THAT
@wrmmagglev9192
Жыл бұрын
Lol
@matthewgreeny2315
Жыл бұрын
Exactly
@BaconNuggetsYT
Жыл бұрын
What's smarter is to start the t perm like this R' instead of R2 that's a waste of 2 moves
@wrmmagglev9192
Жыл бұрын
@@BaconNuggetsYT HOLY I DIDNT THINK OF THAT
@alessandrolimacubista
6 ай бұрын
For Y perm in same position , what algorithm I use?
@seymoj.s
Жыл бұрын
👏👏👏👏👏👍
@fanueloswald1598
Жыл бұрын
Why dont you do a r2 and then a jperm/tperm?
@GoofyAhhYtShort
9 ай бұрын
Bruh f2 bro is hard to execute then the t perm and j perm
@OnlyOriginals_
7 ай бұрын
Hmm what about R2 J R T or A perm?
@luisdominguez2842
Жыл бұрын
Why not just t perm put start with a R' and end with a R2
@brandonc5697
Жыл бұрын
Or you could do a t perm starting with R’ instead of R and ending with R2
@Silver-zy1is
Жыл бұрын
I mean you could just change the first R in a jperm to R’
@legendryaum5303
Жыл бұрын
Just do R2 t perm R2
@B-perm1708
5 ай бұрын
You could have just done a T perm
@Yeti_505
Жыл бұрын
Or do j or t perm but the first turn is R’
@Cubinistic69
7 ай бұрын
I use R3 (Tperm alg) then R2, is it good though? Or the alg on the vid is better?
@arshmansingh3393
Жыл бұрын
Hello Eddie I have been thinking of starting a KZitem channel about cubing can you give me some tips
@ClockSolver
8 ай бұрын
i do a alg with the unsolved corners on the top(solved bar of the unsolved layer at the bottom) the the alg is R U' R D2 R' U R' D2 R2
@TheRocketFlyerMAX
8 ай бұрын
how about this? L' U R' D2 R U' R' D2 R2 B
@ClockSolver
8 ай бұрын
@@TheRocketFlyerMAX where do i hold the headlights at? also it does not work on a solved cube, maybe im reading it wrong
@ClockSolver
8 ай бұрын
@@TheRocketFlyerMAX also dw if u mess up im a guy who does the e perm in the 1990s
@TheRocketFlyerMAX
8 ай бұрын
@@ClockSolver no bro i mean this tutroial one
@TheRocketFlyerMAX
8 ай бұрын
kzitem.info/news/bejne/po1omaqXsXSqY6g
@businesschickenofficial
5 ай бұрын
i would do R2 then tperm
@GoofyAhhYtShort
9 ай бұрын
What about diagonal corner swap? No way this guy tell us don't use e perm,n perm and y perm tho
Пікірлер: 211