2021 update: still seems to be holding up pretty well, subscribe if you want to see some more Sim VR content. I plan on dropping it soon!
@HelmetLawSux
3 жыл бұрын
does it mean no regret?
@quintusdias207
2 жыл бұрын
Thank You for the update.. could You please put the link where I can find the same wheel that You currently use.. fyi My Driving Simulator is Thrustmaster T300 Ferrari Integral
@or3n_
Жыл бұрын
is it still good? doing it to mine tomorrow
@filentitech7158
Жыл бұрын
hey buddy how's the wheel you still have it?
@jamessoriano5166
7 ай бұрын
You still got the wheel?
@thirdworldcity
4 жыл бұрын
At this point tea is just building a car that can’t move
@BigTea
4 жыл бұрын
You know it
@xexat
4 жыл бұрын
My sims racing setup I should be sleeping
@franklinfocus
2 жыл бұрын
CAUTION ⚠️ 🛑 💥 When you pull out the cable connected to the stock steering wheel be EXTREMELY careful to not damage it, you need the original steering wheel plugged in for the buttons. If you don’t have it plugged in, it won’t even register the new wheel at all. 💥 I broke the clip on the end accidentally and it’s going to cost me $150 to fix 🔥
@dylandetaeye
Жыл бұрын
this is a t300 rs.... there is no problem when the wheel isn't connected...
@Tsik.D.
Жыл бұрын
In consoles I think you need it. In PC you can use it without buttons if you want..
@vincent.416
11 ай бұрын
@@Tsik.D.yeah believe thats a console thing. You just guide the end of the cable throught with a thick screw driver. Been a couple times i wanted to give up and rip it out but be patient it doesnt have much to get stuck on.
@KameTrick
3 ай бұрын
Ultra-late comment energy🤣 My buddy pointed out that you mentioned me, and thus I appear. Thanks for watching my stuff, and yes the wheel does look good on there! Is it still holding up well, or have you moved up to a different wheelbase by now? Cheers!
@KarmaSinMinecraft
4 жыл бұрын
That's a really awesome set up
@BigTea
4 жыл бұрын
Thanks homie 😁
@ChicaneMedia
2 жыл бұрын
How's the custom adapter holding up? The durability has always been an issue as I've noticed people have had them break before. I guess it's dependant on material too
@BigTea
2 жыл бұрын
Occasionally I’ve had to tighten a screw here and there, but otherwise it’s seemed to still hold up pretty good. Granted I don’t use it daily, but I’ve had multiple people put some use into it overtime and it hasn’t broken yet.
@diedforurwins
2 жыл бұрын
So I actually used some L brackets stuck together to form an extension for the paddles which sit further out and forward now
@BigTea
2 жыл бұрын
Not a bad idea 😳
@diedforurwins
2 жыл бұрын
@@BigTea yeah it even added to the weight since I used very beefy ones and the clunk when shifting is very satisfying now
@LZYDOG
Жыл бұрын
Do you think you need the hardware on there to fit the custom wheel on? I wanna just buy the base and fit a custom wheel and use controller for navigating menus. But 1. Will it fit like this 2. Will it not work cause it needs to recognize the wheel with the hardware. Idk any input?
@RowynDaily
3 жыл бұрын
Is that adapter can fit most racing wheels outhere?
@xuimod
2 жыл бұрын
You sound so much like that popular Wow streamer. Can't remember his name off the top of my head. He does a lot of FF14 content now.
@socks2441
3 жыл бұрын
i would prefer the to source an adapter that uses the standard t300 quick release so i can switch between a real wheel with no elecronics and the stock wheel. there are plenty of 3d printed adapters for sale, but they are pretty pricey for 3d printed parts, and being more complex/ fragile than the adapter shown in this video im worried it might break. hmmm. and it looks too complicated for me to figure out a way to make my own.
@jakemcgehee529
2 жыл бұрын
bro why even comment lol
@socks2441
2 жыл бұрын
@@jakemcgehee529 I dunno. It's just there are more options than shown in this video. Using the adapter shown you have to disassemble your stock wheel, it puts the wheel further out adding more stress to the shaft/ wheel base etc. But the adapter does not have to be as strong. If you buy the other adapter you can keep your stick wheel, switch between them etc.
@aidenhowe4815
Жыл бұрын
Can i rig this for my t248. It could do with a larger rim for some sort of makeshift return and ffb gain. Wheel operates a little slow for rally but is a great gt3/f1 wheel. Incredibly precise for what it is.
@aussiecartel4669
2 жыл бұрын
Does this adapter work for tsxw racer
@RST1992
Жыл бұрын
Can I use this on my console rig? As it will remove the buttons from the wheel on my TGT2? If so, does it have to have a controller connected?
@zeyadalzidan5653
2 жыл бұрын
Do i need to buy adapter for the new wheel? Or it will work with original one just remove the t300 wheel and just install the custom one
@0ziYT
3 жыл бұрын
Do you remember the name of that deep dish wheel might cop 1 myself.
@thangarajpv5674
2 жыл бұрын
Will this work with tx servo base?
@LZYDOG
Жыл бұрын
Do you need to have the hardware of the original wheel on there? Cause I want to just buy the base and fit on a custom one like you.
@BigTea
Жыл бұрын
Good question…I don’t *think* you need any extra hardware..maybe some screws..but I think the adapter comes with them.
@Tsik.D.
Жыл бұрын
Do i need the buttons from the small wheel, or i can use only the new deep dish wheel with the adapter without any buttons?
@BigTea
Жыл бұрын
You can use it with the buttons, they’re just hard to reach
@Tsik.D.
10 ай бұрын
Thanks!!! Any problems with the motor? Does it makes any sounds? Oveheating or something like that?
@beamngdriver912
2 жыл бұрын
Bro, can you take off the adapter dimensions?)
@BigTea
2 жыл бұрын
Adapter is in the description homie
@isaacabernathy2377
3 жыл бұрын
Should I get the t300 base and buy t3pa pedals and diy invert and buy a aftermarket wheel for the t300 base or buy the Logitech g29
@BigTea
3 жыл бұрын
T300RS GT is probably the best deal for the money. I’d definitely recommend the t300 over a g29. I didn’t enjoy the feel of the gear driven wheel. It’s a good deal if you aren’t picky, but the t300 feels much more like a “real” wheel
@isaacabernathy2377
3 жыл бұрын
@@BigTea yeah that’s what I was thinking I won’t be able to get pedals though cause I’m low on money so idk
@joei4ever
3 жыл бұрын
is it holding up as well? Any chance you could share 3d print files?
@BigTea
3 жыл бұрын
It’s been good so far. I bought the adapter from eBay but I’m sure you could find files for something similar.
@joei4ever
3 жыл бұрын
@@BigTea thanks for the feedback. I'm trying to avoid long wait for shipping,and can't find 3d model NOWHERE
@jaredlyons4122
3 жыл бұрын
@@BigTea What was the actually adapter you got from eBay? What should I type in and search for?
@Mr_steal_yo_girlfriend
2 жыл бұрын
Im in a problem with mine I've putted the mod on it but the steering wheel wont start-up what's cause that problem? Sry for my bad English
@BigTea
2 жыл бұрын
I don’t think that should be a problem. It’s basically just a plastic spacer. The wheel doesn’t recognize it as anything weird.
@Mr_steal_yo_girlfriend
2 жыл бұрын
@@BigTea ok and what about that little spring?
@SilverZepp
2 жыл бұрын
Where can I get the 3d file
@aalyan_arabi
3 жыл бұрын
Does this work fine till now? Like the after market wheel does it make sound or the motors start making squeaky noises
@BigTea
3 жыл бұрын
No problems now. I’ve had to occasionally tighten the screws back to get rid of any of the play between the adapter, but that’s about it. The motor gets a little noisy after being used for a while, but it might just do that regardless.
@aalyan_arabi
3 жыл бұрын
@@BigTea Okay:) Sounds good Thank you
@stoss-11
2 жыл бұрын
can you retrofit a fanatec BMW Gt3 wheel on the t300rs with his adapter?
@BigTea
2 жыл бұрын
Couldn't answer that tbh lol
@stoss-11
2 жыл бұрын
@@BigTea did some research the answer is no sadly
@roguepaul970
2 жыл бұрын
Is the adapter compatible with a thrustmaster tx racing wheel?
@Charzilian
Жыл бұрын
Could be wrong so don't quote me, but I believe tx and t300 has the same fit, so this should work on both.
@papi_chulo69420
Жыл бұрын
Why no one talking bout that mouse pad tho 💀
@victornunez4646
3 жыл бұрын
Will this work on ps4?
@edvinpersson2216
3 жыл бұрын
Does g29 adapter work?
@yonyjeankarlovcastillo5099
2 жыл бұрын
Hi , nice video, do you have the template for 3d printing
@BigTea
2 жыл бұрын
I bought it off of eBay, not sure where you'd find an STL. You'd probably need the metal hardware nuts like this one has though.
@Sgtsauls
2 жыл бұрын
Anyone have any idea for t150
@ItsKagan
Жыл бұрын
how many screws the adpater come with?
@BigTea
Жыл бұрын
All that you need
@ItsKagan
Жыл бұрын
@@BigTea does it come with screws for the other steering wheel that you put on the adapter
@faolansheil6903
2 жыл бұрын
Can you give me the link to everything on your wheel please
@BigTea
2 жыл бұрын
Adapter link is in the description Wheel is just a deep dish NRG
@motabandito
Жыл бұрын
How'd it hold up?
@BigTea
Жыл бұрын
Very strong, sold the setup to a family friend a few months ago and it’s still going!
@motabandito
Жыл бұрын
Sweet, im gonna have the neighbor print me an adapter, already have a wheel so figured might as well 🤙🏻
@Potmonkey00
3 жыл бұрын
OMG who'd use a wheel that big lol 😂
@topg1964
3 жыл бұрын
It’s not even big it’s 350mm like what are you talking about 💀
@hhh2092
Жыл бұрын
the normal wheel is small af, this one is closer to an actual steering wheel people would use in an actual car
Пікірлер: 89