making this for my grandkids! Grandma this grandma that... Old grandpa stepping up his game!
@domsquaaa4323
3 жыл бұрын
worlds best grandpa alert
@engineergaming1972
3 жыл бұрын
This is so wholesome
@williamsuxdic1486
7 жыл бұрын
Awesome video, ultra clear, clean, and constructive, unlike some other mod videos where a 2mega pixel camera is shaking saying 'DONT REMOVE THIS AT ALL'
@Planes9905
2 жыл бұрын
Love how intuitive the tutorial is. Wish more people made them like this. Very clear instructions and camera angles. Beautiful work. This video will last forever on youtube.
@Sketchybro77
8 жыл бұрын
ive been waiting for someone to make the sledgefire practical! ive always been a fan of how the barrel break operates, so this is a must-do mod! keep up the great work, love how in depth and fleshed out your vids are!
@dariancrawford
9 жыл бұрын
Your mod guides are by far the best and most thorough I have seen. Keep up the good work :D
@MakeTestBattle
9 жыл бұрын
+Element Zer0 :D Planning on it!
@aidanbowie5391
8 жыл бұрын
Well damn, you really buffed that nerf.
@keaton1283
8 жыл бұрын
LMFAO xD
@tomstevenson7010
6 жыл бұрын
Stop
@erebus5405
7 жыл бұрын
where has the parts list gone 😣😣😣😣
@MrJackSparrowish
7 жыл бұрын
Just followed this exact mod - SUPER STOKED with it and the mod itself turned out easier that I first thought. Thanks heaps for the vid MTB.
@MakeTestBattle
7 жыл бұрын
You're welcome. :D -Justin
@llkkjgg9732
7 жыл бұрын
i cant find 16 20 and 25 milimeter pipes in america plz help
@annegunzroth632
7 жыл бұрын
llkkjgg 973 I have the same problem will 1/2" 3/4" and 1" work.
@kchinz34
7 жыл бұрын
I am having the same problem :/
@SheriffBones
9 жыл бұрын
This is one of the best mod guides that I have ever seen. Very beginner friendly and easy to follow. Thank you so much for this. I will let you know how the mod goes on my sledgefire.
@MakeTestBattle
9 жыл бұрын
+SheriffBones Sweet. :D Thanks. -Justin
@anonmygplayer4348
6 жыл бұрын
Super fun mod. It's hard to find conduit in these sizes in the US however. I was able to make a brassed version using 1/2 inch conduit with 1/2" open caps that I dremmeled down. For the barrel I used 9/16 brass with a 1/2 inch of inlaid 17/32 to hold the dart in the breech. Getting roughly the same FPS as the video. As a bonus you also get a really satisfying pop sound. Keep up the great content guys.
@ColdheartGoBrrr
7 жыл бұрын
Would this work with mega darts and just use the 20mm conduit pipe as a barrel for them?
@MakeTestBattle
7 жыл бұрын
Yep!
@ColdheartGoBrrr
7 жыл бұрын
Make.Test.Battle Ok sweet. Thanks guys!
@MakeTestBattle
7 жыл бұрын
Although I think you actually want the 25mm pipe but I can't remember -R
@CharliMTF
6 жыл бұрын
@@MakeTestBattle sweet I'm gonna make mine shoot Rival rounds
@rud3m3chanical
5 жыл бұрын
25mm HD conduit (the orange stuff) is a perfect fit for Mega darts. You'll need to trim parts of the outer barrel too, even if you just want a short barrel. If you want a longer one, I'm not sure how to do that easily.
@brooklynnmetz8767
8 жыл бұрын
This is one of the best mods I've seen yet. But personally, I would leave the stock attatched, and superglue some of the shells into it for spare dart storage.
@MakeTestBattle
8 жыл бұрын
+Connor Metz We've since reattached the stock because it also makes a great place to attach a camera to -R
@steekohoopdy4201
5 жыл бұрын
Great vid, trying this now. FYI in this vid it looks like the spring is right terminating. The spring from bunnings now is left terminating and this makes loading the spring extremely difficult. Also we found using the exact knife to cut was to dangerous, was easier to just use the needle nose players to eat away at the plastic
@adventuretime999
8 жыл бұрын
DAT haircut tho. Rockin the Edgar Alan Poe.
@haydencole8392
9 жыл бұрын
Man nice mod guide guys I had no idea you can that kind of FPS from a sledgefire
@dartbeard7108
8 жыл бұрын
Thank you for the video, I am starting one of these for my wife today.
@MakeTestBattle
8 жыл бұрын
+Dart Beard Your welcome. -Justin
@thezachvolt6883
8 жыл бұрын
I have a little problem with my Sledgefire. I once accidentally, yes, accidentally, dropped it down some stairs. From there on out, the AR has been fucked up. how do I fix it?
@callusterj6858
8 жыл бұрын
Take it out
@Finn_Bro362
8 жыл бұрын
The Zachvolt who needs AR in a shotgun? Get rid of that shit
@thezachvolt6883
8 жыл бұрын
max_daxter362 Great idea.
@TheThanimal
9 жыл бұрын
Wow, it has been a while since I have seen a mod video this well done!
@benjamincampbell7241
8 жыл бұрын
I love the Sledgefire and your gameplay footage of it, but would you consider briefly explaining why you run it as a primary in your wars when you're facing up against overhauled flywheels? Just want to hear your thoughts.
@MakeTestBattle
8 жыл бұрын
"Because". Sometimes its not about being "the best", but about using what you enjoy -R
@cavanmorber3238
2 жыл бұрын
@@MakeTestBattle Fully agree
@KennyCutout
9 жыл бұрын
Oh! This is actually what I've been wanting to make for a while now but I didn't really know how to go about it. That thing how you got the shell ejector to give you a better air seal is really quite smart.
@MakeTestBattle
9 жыл бұрын
+Kenneth Newbery Thanks man. Goodluck with your mod. -Justin
@jishdafish6378
6 жыл бұрын
Hey I am sorry but I am in Canada and my Home Depot only has 1/2in 3/4in and 1in pipe what do I do please help
@spazzofspeed
5 жыл бұрын
1/2 in cpvc should serve you well.
@theholypotato2629
2 жыл бұрын
How can I remove the ars with out cutting the hole because I want to keep the tri shot but I can’t with cutting the hole
@andreevangelista8825
6 жыл бұрын
Any alternatives to the inlet valve washer? I cant seem to find any in my area
@gxtentacles9493
8 жыл бұрын
I gotta quick question, I want to keep the 3 darts per shot thing so do I have to modify the barrel to get the insane performance that this thing has?
@gxtentacles9493
8 жыл бұрын
Nevermind, just finished watching the whole video
@Bossgaming60105
3 жыл бұрын
I like the 3 shot part so I most likely won't change that part but I will be upgrading to.a 13kg spring and adding brass barrels as well as removing the air restrictors and adding the foam and stuff like you're doing in this video
@koenkooiman1490
6 ай бұрын
I just used your recommended spring to upgrade my sledgefire, awesome video! Thank you!😁👍
@TheOneMiffy92
8 жыл бұрын
I don't know what gorram "hook" you guys think is there for that spring to be seated into - shredded my fingers trying to fir the C836 spring into wherever it's supposed to go and almost snapped the bar in half.
@gamesfohdayz9117
8 жыл бұрын
In the Uk, I can't find any barrel material What should I use?
@krakkywakky863
3 жыл бұрын
Imagine coming to a nerf tournament with like two hammer shots and this dude comes in with his modded self ejecting double barrel sledge fire that hits so hard it makes the other kids cry
@generalnerf9156
8 жыл бұрын
I'm from the states and even US conduit works. Thanks for the idea!
@KirbyDee
8 жыл бұрын
where are the links to the products?
@LARPBeard
9 жыл бұрын
OOO! I wonder if this can fit a mega dart barrel... Any chance to see range tests and spread tests on this? aspecialy range for single, spread for triple load.
@MakeTestBattle
9 жыл бұрын
+LARPBeard Interesting idea; making a breach for megas is a little tricky but I know its been done. As for range tests etc; expect to see something far more useful soon! *mysterious* -R
@LARPBeard
9 жыл бұрын
^_^
@nerfmodsforbeginners796
8 жыл бұрын
Tested mine on the weekend extremely consistent (10 shots) 127fps with fvjs and (3shots)155-157fps with elites and mid to high 90s with double loaded fvjs
@MakeTestBattle
8 жыл бұрын
+Nerf mods for dummies Nice. Similar to what I got. -Justin
@akyrothea4919
3 жыл бұрын
Hey Justin! Can you still use the stock catch spring or is it beefy enough already to keep using with the upgraded spring?
@skipperboab
8 жыл бұрын
Nice colored darts, Christmas colors and rebelles
@happysnowboarder2039
8 жыл бұрын
where can I find the silicone valve???@maketestbattle
@lukasotey2304
9 жыл бұрын
i found the spring but my hard ware store dose not have 16mm pvc?
@MakeTestBattle
9 жыл бұрын
+luke otey What country are you in? If you're an American you may need to substitute for 1/2 inch PVC of some sort or another material like PETG, Brass, or polycarbonate. Different materials work best for different darts. -R
@bommer772
8 жыл бұрын
Thank you guys for modding my favourite blaster if you have anymore ideas for the sledgefire please publish the idea👍🏻👌🏼
@radioactivesdesigns3554
7 жыл бұрын
how powerful of a spring will fit in the blaster, and not break anything?
@Ciel1820
6 жыл бұрын
5:41 Will the gun work slightly better still if I just cut out the air restrictions and put it back together?
@antoniopalafox9158
3 жыл бұрын
Finally somebody shows how to change the spring
@lolol.y7935
6 жыл бұрын
"How many kg" the spring linked in the description is ? I mean compression force Edit: I've more questions: are the diameter of pipes shown in the video internal diameter or external ? Is a catch and catch spring upgrade neccesary for this mainspring ?
@radioactivesdesigns3554
7 жыл бұрын
how thick is that cardboard? using modded shells (stuffed playdough in 2 of the stock shell barrels) and taking the air restrictors out, im shooting through boxes with the vinyl tipped darts with that. oh.. and i added a spring to the ejector piece for full ejections.
@The_Real_Ryan
6 жыл бұрын
I just bought one. I’m going to mod it just like you did.
@fosterzinn9935
9 жыл бұрын
Is make test battle going to post more? I really love your vids and they are really high quality. I just wish I could watch your vids at least once a week.
@MakeTestBattle
9 жыл бұрын
+Foster Zinn YES. We are. :D Aiming for twice a week. -Justin
@fosterzinn9935
9 жыл бұрын
+Make.Test.Battle Thank you so much. Can't wait to see more content. Also I have two more questions. When will the ugly stick video be coming out? When will the mtb rhinos be available for purchase? Thanks.
@ThaSeshGremlin
9 жыл бұрын
love your aussi mate so many american nerf moders
@SirBrass
7 жыл бұрын
Is there a dart drag effect from the barrel here on the dart? I'm thinking of doing all the backend (air seal, AR delete, & spring upgrade) part but leaving the front end alone to use a Slugfire single shell so I can swap between 3 & 1 shots. Thoughts?
@Crimz1337
7 жыл бұрын
Do you know where i can get the spring in sydney i don't feel like getting on eBay or something or will Century Spring Corp 22.2 x 101.6mm Compression Spring work?and i can't see any parts list on the links
@MakeTestBattle
7 жыл бұрын
At Bunning's dude. -Justin
@patricknapier8902
7 жыл бұрын
well, I never got the C-836 to seat properly, seemed like it was too big for the white internals shell. reverted to the original spring but with the other parts of the mod and despite using the stock spring this is gnarly!
@sucygin7803
5 жыл бұрын
Is there a mod where I can just keep everything the same but put in a new spring so the 3 Dart shell pops out fully on its own?
@jfmarzulli
7 жыл бұрын
If I'm considering keeping the shotgun shells, is it best to leave the ARs intact and in place?
@PedroHenrique-cz5oh
7 жыл бұрын
Instead of using a barrel made entirely of conduits. Could I use a 3D printed shell with a conduit?
@meroastisruined3039
8 жыл бұрын
Hey MTB what are your favourite blasters? Mine is a long story but my favourite is the Stockade
@MakeTestBattle
8 жыл бұрын
Right now mine is the sledgefire, but not the one you might be familiar with... video soon! -R
@darasheeran6497
9 жыл бұрын
could you make some shells without the 16mm conduit and use 20mm for a mega barrel and have them interchangable?
@tymo1995
8 жыл бұрын
I had a friend of mine build this for me, using a brass breach instead of pipe, and some kind of liquid rubber in place of the silicone washer. It is definitely stronger, but I don't think it is as strong as it is in this video. I'm unsure as to how you got it to seal up as you did in the beginning of the video with your hand on it. Even after lining the O-ring area with tape I can't seem to pull that off. Any advice?
@alflix8944
4 жыл бұрын
What other glue brands can you use instead of Selleys glue? Also is there a link to a parts list or no? I'm mainly interested in the glue and inlet valve
@ethankim1089
9 жыл бұрын
What are the dimensions of the valve washer?
@dawazobrist5867
6 жыл бұрын
I didn't quiet understand why you removed the breechlock at 3:26, can somedbody explain it to me? Thanks in advance
@santoshthakur3300
6 жыл бұрын
PLEASE make Retaliator or Hyperfire and Strongarm Mod guides.
@MakeTestBattle
6 жыл бұрын
Ok. Working on a Turbo Advance Mod at the moment. -Justin
@Robert-xf5ez
5 жыл бұрын
.
@DraconisMarchVII
8 жыл бұрын
Have you ever tried a K26 in a Sledgefire? Also why do you use such a huge chunk of foam for the plunger head padding?
@Oglv730
8 жыл бұрын
1. i don't think a k26 spring can fit in a sledger fie 2. if if it could you could barely even operate the blaster with that powerful of a spring in sledge fire
@DraconisMarchVII
8 жыл бұрын
+Liam Ogilvie Not a full K26, but part of one. I've already done it. It works wonderfully and isn't hard to operate at all.
@Oglv730
8 жыл бұрын
aw man, now I look stupid i apologize, i thought you ,want a full k26 spring
@brianchen5998
7 жыл бұрын
I have a question I live in California and I am stuck on one part of this mod the barrel because I covered the mm of your barrel and the in side of my barrel is to large in side to hold the nerf dart in snug any suggestions
@RCMasterAA
8 жыл бұрын
Can you please let me know what 16mm conduit you used? I could only find 20mm and 25mm Deta conduit from Bunnings.
@MakeTestBattle
8 жыл бұрын
You need to go to an electrical store like Rexel, JR Turks, or Middys for the 16mm. Bunnings doesn't carry it -R
@matthewbro3
8 жыл бұрын
I'm in two minds about this mod. On the one hand, it is really cool, and simple enough. Performance seems good too. With the stock removed, it has a certain hand cannon look to it. On the other, I have my doubts about the practicality of it. A lot of it comes down to how fast you can change out the homemade shells and what the spread on a three-round load is. If the homemade shells are easy to reload, I'd be on board, since it could be used in much the same way as intended, but with better performance and less concern over shell loss. Also, given that there are 3D printed shells available that fire mega darts, I figure the build could be modified to chamber megas, though given the thickness of pipe needed, I can't be sure. Thoughts? I have a hunch that the volume of the plunger is larger than that of the barrel, even at that length, which by my reckoning means wasted air. A mega dart may be able to make better use of that. I am now finding myself tempted to do a cosmetic modification to make this look like the Thumper from Tribes: Ascend, and having the larger dart would add to that feel. Also, the Sledgefire does look like the Thumper quite a bit.
@touchstonerat
8 жыл бұрын
The new spring has a slightly larger overall diameter than the stock spring, and it seems just a little too big for the white case around the mechanism to close properly. Do I have it badly seated?
@MakeTestBattle
8 жыл бұрын
Maybe, once seated I didn't have a problem closing it. -Justin
@DrX427
8 жыл бұрын
Is it possible to use something along the lines of a dremel or rotary tool to get rid of the internal AR in the plunger tube? Also, what load do you think is appropriate for the build? I have an 11kg lying around, so I was gonna use that.
@Finn_Bro362
8 жыл бұрын
DrX427 that would probably be easier than what he did
@ra-meme6090
7 жыл бұрын
i have a question, im doin the mod but will it work with 3d printed shells with brass
@hunterhulsey5799
7 жыл бұрын
i what it to be modular.....so how would I make this with PVC (like a 3D printed shell with a brass/copper barrel that I can remove and it still shoot 3 darts if I put a shell in it)
@jimmmyjohns2853
6 жыл бұрын
What blaster should you mod first? This one. (Nerf dart Almost goes through cardboard
@SoySauceSupreme
2 жыл бұрын
Is the barrel needed to be modded for his entire setup to work
@cartigayvamps8105
7 жыл бұрын
Nice video very helpful for my sledgefire!
@jhamilton5175
8 жыл бұрын
omg as soon as he took his hand off the barrel my phone notification went off
@philipcamuto7359
7 жыл бұрын
Where is the part list I can't find 16mm tubing
@dracon5700
6 жыл бұрын
any chance you could post a link to the washer you used, my local hardware stores don't seem to stock it. love the vids and guides -John
@chubycat
4 жыл бұрын
In the video you said cut 2 rings at 15 mm of the conduit then you say cut 2 more but you dont tell us what size and it's a visible difference in size
@SheriffBones
9 жыл бұрын
Do you think that 1/2 inch pvc would work. I ask because in the past it has had a tight fit on my darts but I see that you are able to easly put your darts into your barrel matterial and that is what i am looking for.
@MakeTestBattle
9 жыл бұрын
+SheriffBones It can be very hit and miss depending manufacturing tolerances of the pipe. Thought if got a drill a fraction bigger than the barrel to bore out an the entry port just deep enough to get the dart in.
@KermitDaFrowg
7 жыл бұрын
can you still use the normal shell? nvm I just saw that bit in the video
@NicholasKonradsen
8 жыл бұрын
Personally, i think the jolt is the first mod you should perform. You don't need to buy anything, and it really buffs it.
@MakeTestBattle
8 жыл бұрын
+FoxyBanana Lots of good options, but we feel the Sledgefire is an easily do-able mod and give you a lot of experience with several important modding skills, like AR removal, spring replacement, and custom barrel cutting/fitting -R
@NicholasKonradsen
8 жыл бұрын
+Make.Test.Battle Oh, ok. Thanks for your reply :). I just though that the jolt is good, as it it goes wrong (which is very difficult), it's cheap to get a replacement. It's also easy for the younger audience, as you just have to pul a couple of things out, and unscrew a few things, and you can replace the spring if you want even more power. Also, i've attempted to mod a Nerf N-strike Elite Alpha Trooper Cs-12, and as soon as i unscrewed it, all of the springs and machinery popped out, and it became useless.(I'm probably gonna glue some of the things on, and paint it. (So i can use it as a decoy, for holding mags) Anyway, I like this, i just like the sledgefire's 3-dart shot & shell system. But still, I just kinda like the streange & fun weapons, and prefer stock, unless the gun is REALLY under performing (Like if my Nerf Gun didn't shoot to far, like if i got a grey-trigger.) Anyway, thanks for your reply and input, i really love your videos, so i look forward to watching more in the future, man. :) PS: Have you/ do you plan on doing a lawbringer mod video, i really love that gun :) Thanks, -Oscar
@MakeTestBattle
8 жыл бұрын
FoxyBanana Yeah! Everyone does things differently. Im planning on doing a Retaliator/Modulus Recon guide soon. No plans for the Lawbringer as its just a case of "Put a bigger spring in" -R
@NicholasKonradsen
8 жыл бұрын
Make.Test.Battle Yeah, but I think that you could try something. Maybe pu in the metal hammershot kit, as it's internals are almost identical. Anyway, thanks :)
@isaachart8753
3 жыл бұрын
If i still want it to be a shotgun will removing the ar still be good?
@evangibeau4489
8 жыл бұрын
what happened to the product links, and can we get this stuff here in the states?
@SeanGotGjally
8 жыл бұрын
We probably can, it just takes an extra while. My rhinos came after almost 2 weeks from ordering so don't be surprised if it takes a while.
@ghostboi817
8 жыл бұрын
everything here including the blaster can be found at Walmart or Home Depot
@evangibeau4489
8 жыл бұрын
+darkest3angel3 I'm america?
@ghostboi817
8 жыл бұрын
+Evan Gibeau yeah
@prototype4225
8 жыл бұрын
yeah because you're the entirety of america what you meant to say is you're american.
@arthuraudy1784
6 жыл бұрын
I'm from canada and the only problem is at canada we do not have 16mm barrel can i use a different thing ?
@Load_the_ducks
8 жыл бұрын
ok. i need advice. i'm making an air powered shotgun out of a rampage and a BUMB tank. what aisle is the washer in? i went to the plumbing section, but couldn't find those. it felt like they where all to stiff. cheers, -ben
@Load_the_ducks
8 жыл бұрын
p.s. i'm in aus, so the above refers to bunnings
@MakeTestBattle
8 жыл бұрын
The plumbing aisle where the toilets and stuff are -R
@mhebert350
4 жыл бұрын
Help needed here 13 kg spring upgrade Catch spring also upgraded Rods have been reinforced with steel epoxy and nails in the gap, super solid now but still won't catch the last tooth, spring sit correctly, everything that move have been lub any1 have any idea ?
@rppalanca8523
3 жыл бұрын
Do you need to upgrade the catch spring?
@100unori2
8 жыл бұрын
Where do you manage to find 16mm conduit/pvc/cpvc in Australia? I can't find any stores that sell 16mm.
@MakeTestBattle
8 жыл бұрын
+100% Unoriginal Rexel or Ideal Electrical.
@100unori2
8 жыл бұрын
+Make.Test.Battle Thank you!
@memechaelthegr8667
8 жыл бұрын
Is it possible to buy this from you ? Or do a commission
@ModSquad
6 жыл бұрын
Does anyone know if it is CPVC or PVC, or is it something completely different???
@BobOBob
9 жыл бұрын
The propellant in your "plastic safe" lubricant is NOT plastic safe. All sprays are bad. But you can use the contents just fine by spraying into something like an emptied model paint jar and waiting a few minutes for the dissolved propellant to disperse. This mod is almost exactly like the captive barrels a few of us did to make the old Buzz Bee Double Shot shell-less. I should see if I can dig mine out for photos.
@MakeTestBattle
9 жыл бұрын
+Bob O`Bob I have three underover Double Shot and not sure what to with them. Love to see the pic here or NMW. -Justin
@BobOBob
9 жыл бұрын
Make.Test.Battle if I can't find the old side-by-side that I installed barrels into, perhaps I'll try one of the O/U blasters later this year. I somehow ended up with several, and honestly after such a conversion the old one was not terribad. It was mostly just fitting larger bits of tubing to both ends of a CPVC barrel (shorter than the shell barrels), so that it could move just like yours does, for a decent seal. The hidden piece just held it captive so it wouldn't pop out, but also helped align it so the darts didn't hit the faux barrel on their way out.
@justjosh6558
8 жыл бұрын
+Make.Test.Battle hey do you guys know any good replacement springs for the fire strike I live in Melbourne btw 😀
@hanktheguy3237
7 жыл бұрын
what type of PVC is equivalent to what you used
@rud3m3chanical
6 жыл бұрын
Any chance of an update to cover different barrel materials for different darts? Would love to make a barrel suited to Accufakes.
@finlaycooper4770
8 жыл бұрын
"Good air seal" more like PERFECT air seal
@MakeTestBattle
8 жыл бұрын
+Finster 137 ;)
@UltraGiritina
9 жыл бұрын
Where did you get your 16mm conduit? I live in Sydney but I can't seem to find any.
@ColdheartGoBrrr
8 жыл бұрын
Same. I can't find it anywhere😢
@UltraGiritina
8 жыл бұрын
never mind. There is a supplier called City Electrical Supplies near the bunnings in chatswood. They sell 16mm conduit there.
@ColdheartGoBrrr
8 жыл бұрын
Thanks mate. I'll be sure to look there
@rubenthetreehousebuilder3558
2 жыл бұрын
Hi i cant buy this spring becuase it is out stock what is its length?
@TheEpicCake71
8 жыл бұрын
Would using brass as the innermost barrel yield any significant power increase?
@MakeTestBattle
8 жыл бұрын
+TheEpicCake71 no
@suedrav
8 жыл бұрын
Would the pipe cause it to look like it might be real? If so could I cut some off?
@MakeTestBattle
8 жыл бұрын
Paint it orange? -Justin
@someguynamedmarshall5010
8 жыл бұрын
How much of an fps decrease would there be if you don't improve the air seal? I don't want it to be super powerful so I can play inside with my friends.
@MakeTestBattle
8 жыл бұрын
+TheOutdoorGeek Do note I am shooting solid vinyl tip darts, nicknamed Full Vinyl Jackets(FVJs). If you just do the spring replacement, use stock elite darts, use stock shells and leave the air restrictors in you should be fine. -Justin
@someguynamedmarshall5010
8 жыл бұрын
+Make.Test.Battle thank you for the help. I'm just starting to mod Nerf blasters.
@andrewp2782
7 жыл бұрын
I installed the new spring inside of the internal shell, but one of the clips won't close
@kimojumamil6121
6 жыл бұрын
would 1/2 in, 3/4 in, and 1 in cpvc work as barrel material?
@killaiscute2458
6 жыл бұрын
Can you use the stock shells as well? Would like to use as shot gun as well
@BotanicAlpaca
8 жыл бұрын
You could cut the feeding tube a bit before the stock shell ends,right? So you can have a beast in desquise. + the stock whould provide you easy access to new darts! Just asking btw. keep it up m8s nice work!!!
@MakeTestBattle
8 жыл бұрын
Certainly, but that length is what we found provides optimum power -R
@BotanicAlpaca
8 жыл бұрын
Cool. Ty! bb
@dylanpennington8857
7 жыл бұрын
while the c 836 spring is around 7-8.5 springs if im correct
Пікірлер: 746