Finally, a video I can watch all the way through without having to skip through useless filler content. Thanks for keeping this short and to the point. I'ma load this up this weekend on my tazer.
@WorkPlayDrive
4 жыл бұрын
That’s the goal. I did take out a 48 minute driving montage of my trip to 7-Eleven to get an energy drink 😯
@CTHellcat
4 жыл бұрын
@@WorkPlayDrive Exactly the nonsense I was talking about!
@SModelMafia
3 жыл бұрын
Thanks for doing this. We have a FB group,and the questions come up all the time. GREAT info here.
@WorkPlayDrive
3 жыл бұрын
Glad it was helpful! Thank you
@CJwhe1267
3 жыл бұрын
This video has made it so much simpler! Thank you very much!
@WorkPlayDrive
3 жыл бұрын
Happy to help
@Shocka252
4 жыл бұрын
I haven’t updated mine since I bought it ☠️☠️
@dugefresh7063
Жыл бұрын
Can I use this system to reconfigure factory settings on my 2013 DOdge Ram 2500 Diesel, i.e. I want to reset the fuel tank capacity to accommodate a replacement large capapcity fuel tank and recalibrate the factory setting from 31 Gallons to 52 Gallons so my Miles to Empty changes based on the higher capacity tank?
@Cj085-2.0
5 ай бұрын
Thanks for getting to the point
@jimferry4751
4 жыл бұрын
I have to update my Tazer now. Thanks for the easy to follow video. I'm in central NJ, I see you have Jersey plates where ya from? Thanks again
@alexgaona6868
Жыл бұрын
i install tazer but m swap old cluster to new one but the controlls arrows dont work to change setting s creen u think i need to updated? maybe its a old version i have
@LUIBEFISHIN
4 жыл бұрын
I did everything but the tazer won’t show up on the pc the light flashes red but won’t connect to the computer ... the drivers were installed
@faeez2006
3 жыл бұрын
Another awesome video, thanks bud.
@WorkPlayDrive
3 жыл бұрын
Thank you 🙏
@BBHemisnJets
4 жыл бұрын
2020 challenger after install “”wrong Vin number””” during run through of options . !!! Any ideas?
@WorkPlayDrive
4 жыл бұрын
If you purchased it used the last person did not unmarry it from their car. You can reach out to Zautomotive support to purchase an unlock code.
@BBHemisnJets
4 жыл бұрын
@@WorkPlayDrive Thanks.WPD I'll let them ask me for more $$ ☺ Love the vids -keep em coming NJ/NY brother -
@392jr9
4 жыл бұрын
Everything I plug in my tazer it tells me “device not found” I need help
@fabryronaldo
2 жыл бұрын
I got thiz problen now divece not found Help !!!!
@MegaLimeboy
2 жыл бұрын
@@fabryronaldo me too, I closed the app and re opened it and it worked
@lukewatkins9559
4 жыл бұрын
Which one is better, Hellcat Burnbox or the Tazer
@WorkPlayDrive
4 жыл бұрын
Hellcat the burnbox gives you the main features line lock cool down and light show. If you want the added features like windows from the key fob you need the full taZer.
@r3drum_ram837
4 жыл бұрын
hello mike i just updated my tazer for my 13 charger rt plus and i love the new track mode and track transmission i cannot wait to test it out. but i did notice it removed my sport mode is this correct? i really dont know what will work for my model..be well
@JonathanDiaz-vm5mb
10 ай бұрын
Track eats the gas up a lot faster
@yobee71
4 жыл бұрын
The new update doesn't let the daylight running lights on my turn signal. The one before it was working fine. Now new update doesn't turn it on. 😪
@JonathanDiaz-vm5mb
10 ай бұрын
Do you have to unmarry the tazer first?
@stevealoia
4 жыл бұрын
I was thinking of getting one . But I have the RT plus . With super track pack . So would it good to have . Hope all is well mike .
@WorkPlayDrive
4 жыл бұрын
Doing well, the line lock feature alone makes the price tag worth it. Light show is another great option for shows. Take a look at the features on the Tazer site there are a lot.
@stevealoia
4 жыл бұрын
Hey Mike I ordered the Tazer but the WPD code didn’t work . Just a heads up
@jeepjt6868
4 жыл бұрын
Hey great vid, but do i have to unmarry the tazer befor i do the update and then re marry it?
@WorkPlayDrive
4 жыл бұрын
It’s recommended just in case something goes wrong and you need to restore it.
@richardtepas4832
4 жыл бұрын
what is unclear to me, should i unmarry before updating and are previous settings saved ?
@WorkPlayDrive
4 жыл бұрын
I always lean towards the side of caution and un-marry before updating. I log all the settings as I change them, it also helps when trying to answer questions. When you un-marry the Tazer returns your car to the stock settings and forgets the changes you have made. Post update I hop back in the car and reset the settings I want to keep.
@richardtepas4832
4 жыл бұрын
okay, thanks !
@johnnycardenas2774
Жыл бұрын
I need help I updated mine and now it done work
@braney56
4 жыл бұрын
Mike, you should hook up with Mod2Fame and do a video. I think he's in N. Jersey.
@cameronkirby9764
4 жыл бұрын
Can you do a Custom Light show video? Would really like to do Light Show 2 but with turns instead of brake on a ram
@joshuabrumback9681
Жыл бұрын
WPD made it look soooo easy. This kinda ish is never easy for me lol. I think it's zautomotive that's the problem not me. My screen didn't look like this. When i check the app it says i have 2.3.0, the new update is 2.5.9. So i erased the file and reinstalled it. It's coming up as 2.3.0 again. The page in the app doesn't come up for me. Let's be honest here, zautomotive don't wanna hear from us after the purchase. There's signs on the sight, in their emails and even wpd hinted at it. I can't get this damn thing working and i don't wanna call em fml
@hemichallenger3643
4 жыл бұрын
I have whatever firmware shipped with mine back May 2018
@datboykris07
3 жыл бұрын
Yes sir!
@domcam88
4 жыл бұрын
Im having issues with doing my update on my Mac computer
@qbanking
4 жыл бұрын
Dominic Campbell don’t break it just go to a windows computer
@1markettim
4 жыл бұрын
What does the new update do ?
@braney56
4 жыл бұрын
@1markettim It's just the latest software used to download newer versions of firmware.
@resdawgs
2 жыл бұрын
Come on man nobody is showing the firmware cable anywhere
@WorkPlayDrive
2 жыл бұрын
Let me know what you need I’ll see if I can help.
@resdawgs
2 жыл бұрын
@@WorkPlayDrive i need to know what type of cable needed to update firmware
@resdawgs
2 жыл бұрын
2018 charger
@resdawgs
2 жыл бұрын
@@WorkPlayDrive i need to know what type of cable is needed
@WorkPlayDrive
2 жыл бұрын
The cable is a USB mini from mono price. Here is a link www.amazon.com/dp/B003L18SHC/ref=cm_sw_r_as_gl_api_gl_i_X5DRDAFJEZS7XBGJ5V3J?linkCode=ml2&tag=workplaydri05-20
Пікірлер: 56