Thanks John. Very thorough details on set up and cleaning. Much appreciated!
@jasonf8985
9 жыл бұрын
Can anyone tell me how to replace that front roller the soft one ?
@GMITLABEL2013
9 жыл бұрын
+Jason F -Jason, I'm doing this by memory but I believe the whole assembly has to be removed from the machine to replace the "platen roller"(white soft roller). That assembly is disconnected by loosening the bolts from inside of the other side of the machine, where the CPU boards are. It's not an impossible job but it is cumbersome.John
@mohammednibin2550
7 жыл бұрын
hi sir can you tell me how to resolve head open error.most of the time i face this issue and if i press the head assembly this error goes.
@GMITLABEL2013
7 жыл бұрын
I'm assuming you have a Z4M Plus? When you close the head it should click and lock into place. When that happens to it closes an open circuit and the error message should disappear. Make certain that it is clicking and locking into place when you close it. Check the point of contact to make certain that the metal to metal contact is being made and that the locking device is holding it into place. When you close the head and it locks into place, there should be no play.
@mohammednibin2550
7 жыл бұрын
GMITLABEL2013
@mohammednibin2550
7 жыл бұрын
Hi sir we deal with z4plus ,z400,z410,z230 most of them have this issue and when we close the head part there is click sound but still the open head error. arises.And sometime it prints but again goes back to open head error
@jamesl2942
5 жыл бұрын
I'm using the z4m plus. After following the cleaning steps detailed on this video I just closed the side door and hit the pause button and the error disappeared. Still working on getting the printer to work but that seems to have fixed the open door error.
Пікірлер: 8