This is an amazing printer. Old but lasts forever.
@WichitaFallFishKeeper
5 жыл бұрын
You guys are awesome. I bought one from you last week. I just set it up. I love it. Good supporting information emailed to me and with the packaging. if this one ever fails...i will buy another one from you. Thanks, Mike C
@solutionsgem
4 жыл бұрын
Thank you Mike. Your business is much appreciated.
@jhb9254
4 жыл бұрын
do you know how to go into the configureation settings to not auto calibrate everytime you turn it on? or atleast when you open it? I don't want to waste labels
@Jesus-ov8fk
5 жыл бұрын
Hey solution my printer does not feeds out labels when I turn it on anymore, it starts off with a red dot then waits seconds and turns red, the only time it feeds out labels is when I press the button, I tried calibrating and the printer always stops at the middle of the paper, adjusted the 4x6 settings as well
@solutionsgem
5 жыл бұрын
Hi, Thank you for contacting us. That usually means that one of the latches might be broken. Please check the two green hooks on the lid. If one of them is broken, the printer will not work because is not closing all the way down. Usually the right green hook is the one with the sensor. Please let us know if you bough the printer from our company. We offer repair services and tech support over the phone. Have a great day!
@lanreolofintuyi864
4 жыл бұрын
The green light on my printer would not stop blinking and is not printing at all
@CollectorsFix
7 жыл бұрын
Are you supposed to leave it on at all times? because each time you turn it on it spits out two blank sheets as it calibrates, which is a quite a waste.
@solutionsgem
6 жыл бұрын
Hi, These printers were designed to be left on all the time. Like all newer electronics, the printer will go to sleep when not in use. That way you will not waste any labels when turned on.
@Jesus-ov8fk
5 жыл бұрын
@@solutionsgem hey solution my printer isn't calibrating to the 4x6 paper how do I fix this
@solutionsgem
5 жыл бұрын
@@Jesus-ov8fk Hi, Seems like your printer needs calibration. You just need to push the feed button and count one flash, small pause then two flashes. Then release the feed button. Your printer will feed some labels to measure them and calibrate it self. If it does not work, you will need to clean the sensors or replace them. Let is know is if you have additional questions. We can help you with the printer maintenance.
@jhb9254
4 жыл бұрын
my zebra ZP450 does have adjustable arms but yours doesn't?
@solutionsgem
4 жыл бұрын
Hi, Zebra Makes two different versions of these printers. One with adjustable label holders and one with out it that only works with 4 inch wide labels.
@YourFishStore
7 жыл бұрын
Hello, Which ink do you use for this printer? I have a hard time finding the ink. Can you post a link so we can purchase the ink?
@solutionsgem
7 жыл бұрын
Hi, The beauty of these direct thermal printers is that they do not use any ink to print direct thermal labels. They use heat to print into specially coated thermal paper. We have thermal paper label in our website here: www.solutionsgem.net/collections/business-industrial-office-office-supplies-labels-thermal-labels There is another kind of thermal printer called Thermal Transfer that requires an ink ribbon. The printers are similar but the thermal transfers uses a plastic roll with ink on it that transfers the ink on to labels or paper. Can you tell us what printer model you have? We will help you find the right product for you. You are welcome to give us a call at 1.888.407.6757 if you have any questions.
@bengosselin8005
5 жыл бұрын
LMAO. Uhhhh....
@thahn8625
4 жыл бұрын
Can I use this with my mac? I don't have a pc.
@solutionsgem
4 жыл бұрын
Hi, Yes you can use the Zebra printer on your Mac. Just connect it to your Mac, got to your printer settings, click on the Plus + button to add a printer. It will ask you what driver to use, choose Zebra ZPL driver. Add the printer on your computer. That is it. The label might come out a bit fuzzy but that still scan. That us normal on a Mac. You can search videos on KZitem about installing a zebra printer on a Mac. You will find instructions as well.
@abdulawalsanbey3781
3 жыл бұрын
i cant find driver for zp450 please provide me the proper link thank you.
@solutionsgem
3 жыл бұрын
There are several drivers that work with this printer. The best driver is called Seagull Scientific. You can download it from here: downloads.seagullscientific.com/drivers/archive/2020/2020.4/Zebra_2020.4.exe We offer free technical support via phone and remote computer connection if you bought the printer from us. If you did not buy from us, we can still help you for a small fee.
@shopbtservice3334
7 жыл бұрын
Can you set up the 450 printer directly to the router with the USB (I have the none ethernet ) or am I dreaming?
@solutionsgem
7 жыл бұрын
Hi, Yes many routers have the option to connect a USB printer to the router so you can share the printer on the network. You will have to find out how set up your printer on the network by reading the router manual or looking it up on the internet. Each router is different. You can also try downloading Bonjour Software. It helps finding the printer on your network if your router is compatible. The software works perfectly for Apple Routers. We can help you with your installation. We charge $49 hour one hour minimum for remote computer connection tech support. We will not charge you of it does not work. You are welcome to give us a call at 888 407 6757.
@jjbuschpokemon6846
4 жыл бұрын
Dont listen to solutions gem lol
@reiftauati2564
6 жыл бұрын
When I try to print the IP address, it does not show on the print out. Do you know how to fix this?
@solutionsgem
6 жыл бұрын
Hi, Do you have an ethernet connected ZP450 printer? Those printers are not too common. If you have a USB connected printer the IP address will not show up on the configuration label. If you have an ethernet connected ZP450 and the IP address is not showing up on the configuration label, your printer might have a permanent IP address configured in its memory. You can try resetting the printer's network settings. watch this video: kzitem.info/news/bejne/s62lqqdvjpeUd4o If that does not work, we offer tech support via phone and remote computer connection for a fee. You are welcome to give us a call at 888 407 6757.
@Sharbat7
7 жыл бұрын
What is the difference between ZP 450 and ZP500.
@solutionsgem
7 жыл бұрын
The ZP 450 was created for UPS. The ZP500 was created for FedEx. We like the ZP450 better because it has a larger motor and its a bit faster than the ZP500. Both work with all shipping programs with the right settings.
@fulol
2 жыл бұрын
@@solutionsgem so when u say it was made for ups what u saying that u can't print fedex canada post or dhl labels?
@milanna11
7 жыл бұрын
does it need ink or something like that?
@solutionsgem
7 жыл бұрын
Hi, No ink or toner ever needed. it uses heat to print to the specially coated paper. These printers are the most cost effective way or printing shipping labels, name tags, barcodes, etc. You can buy them from our store here: www.solutionsgem.net/collections/computers-tablets-networking-printers-scanners-supplies-printers/products/refurbished-zebra-zp450-thermal-label-printer?variant=12444322948 Please let us know if you have any questions.
Пікірлер: 33