Hello Dean, There is a rectangle part, 4x2x1. Datum-A is a top surface, datum-B is cylinder (at left of a long side) and datum-C is a cylinder at right. Why a trihegon shows differently when a cylinder-C is chosen and when a point of intersection between A and C ? Thank you!
@stockmarathiarmy111
2 жыл бұрын
Learning form your valuable vidio keep posting ❤️❤️
@RDeanOdell
2 жыл бұрын
Thank you for watching! I have more content coming soon.
@Go5lincz
2 жыл бұрын
Hi, I was just thinking, why would you use symmetry as a Z origin? I would use Cylinder3.
@abod4speed
2 ай бұрын
It would be nice if you could show complete tutorial for a lathe / Turn part with 3D model , with some flats / Slots , thank you!! Great video.
@Stork817
11 ай бұрын
I also think that setting Symmetry1 as a Z Origin is not an optimal choice, it should be Cylinder3.
@JC-zv3bb
Ай бұрын
I agree, and I would create a 3D line between the two cylinders to create a better lock on the X Axis. The symmetry has too much rotational drift because there isn't a true 6 degree of freedom lock.
@sherryxmean
2 жыл бұрын
Hi! I am currently measuring a cylinder part, and confused on how to set up the alignment. One of the datum is a plane at the end of the cylinder, and another is the cylinder itself. What would I use for the spatial, planar, x, and y origin?
@RDeanOdell
2 жыл бұрын
Hi, I would use the largest feature for the spatial, and choose a feature perpendicular to that for the planar rotation. You may need another feature to establish the “z” depending on the configuration of the part.
@irishj_21st
2 жыл бұрын
I really like your videos and am a CMM tech myself. I juggle with Accura, Micura, and the Duramax. Im hoping you might be able to know about a problem we are having with the Vast XXT head on the Duramax. Sometimes when checking a part the probe stalls and stops. It doesn't show it has wrecked ( the stop light stays green), it just stops. It only happens on the Duramax. Do you know what causes this and hopefully.....a fix?... Thanks in advance for your time and again for the great videos.
@RDeanOdell
2 жыл бұрын
Hi, thanks for the comment. I have had issues with programs running correctly if the alignment is not “just right”. If I have a probe go off into space, or stop, I go in and erase the alignment and select the features for the alignment again. I hope this helps.
@shadab630
Жыл бұрын
You could use Star probe to make complete circles in case of big cylinder
@farandwide8621
2 жыл бұрын
Mr. Odell, How were you able to get the probe to just sweep the arc? When I probe 3 points I still get it wanting to sweep a full circle! Thanks in advance!
@ramonsauceda5480
Жыл бұрын
Adust the start angle and the angle range to 180 so half a circle, start angle will show you where you want it. Hope this helps.
@vigneshwaran1080
Жыл бұрын
Hi sir i need one help, im using calypso 5.4 softwares, how to measure distance of two circle at lower point not at center point.
@abishekshekhar581
2 жыл бұрын
Hello , i really loved your videos , i am learning cmm and your videos helped a lot, can you make an video on concentricity and perpendicularity where you have measure any perpendicularity on center axis of Diameter to another center axis of Diameter and also concentricity as well .
@chrisray846
2 жыл бұрын
I was hoping for this as well.
@feliperebelof
Жыл бұрын
Excelent video. Thank you very much!!!
@larsjustesen297
2 жыл бұрын
Nice to know 👍 But you are navigating is in Calypso i too fast 🤔 but I'm still loving it
@steve5nash
Жыл бұрын
When do you use radial distance vs caliper distance?
@RDeanOdell
Жыл бұрын
I like caliper distance for just about everything that isn’t a GD&T specification.
@martincacer7033
2 жыл бұрын
MR. Odell when you choose the origin how come you use just a symmetry if this is a line, so we need a Z value then it will make a unique point(origin). the Z value should come from the theoretical cylinder3 (horizontal cylinder). thanks for your hard work teaching for free.
@lobaniyasunil7395
Жыл бұрын
Sir please one demo ..for how can check profile of surface as well as profile of line ..on CMM
@cncdude9680
2 жыл бұрын
How would you do that alignment without the two cylinders? Say you had a hollow rod and you wanted to check the straightness. No plane, no cylinders, just a hollow rod.
@RDeanOdell
2 жыл бұрын
Great question! I would put the part in a V block and use the surfaces of the V block for alignment.
@cncdude9680
2 жыл бұрын
@@RDeanOdell For the planar rotation?
@RDeanOdell
2 жыл бұрын
@@cncdude9680 Yes. I would use the axis of the cylinder for the spatial and a plane on the v-block for planar rotation. X,Y,Z origins shouldn’t matter much to check straightness or length.
@cncdude9680
2 жыл бұрын
@@RDeanOdell Thank you so much! I will give this a try when I return to work on Monday. You have no idea how much you have helped me and many others! Thank you for the work you do!
@cncdude9680
2 жыл бұрын
@@RDeanOdell So everything worked great on Monday when I used the v-block for the planar rotation, but today when I came in and tried to check an identical part using the same alignment, the part was flipped 180 deg. The first feature probed exactly where it should, then the probe went in the opposite direction it should. Any suggestions of what I may be doing wrong?
@manojya6354
11 ай бұрын
Hi sir how to use envelope principal in Zeiss Cmm
@aravinthkumar6649
2 жыл бұрын
Dear sir your vedio was good👌👌 please explain 6 Degree of freedom how to arrest the calypao alignment
@RDeanOdell
2 жыл бұрын
Let me see what I can do. What kind of parts are you inspecting?
@manojya6354
Жыл бұрын
Hello sir How to calibrate disc stylis.
@gariajagmohan
2 жыл бұрын
Sir Can u please tell What is 'rotation in space ' & 'Planar rotation'?
@TheGuyWho888
Жыл бұрын
Rotation in space is for placing your Trihedron, use your top plane preferably. Planar rotation is to set the orientation of your primary origin.
@srikanthkagitham4259
Жыл бұрын
U from sirr
@jefffrodermann5348
2 жыл бұрын
F11 on the keypad = circle macro
@RDeanOdell
2 жыл бұрын
Did I not mention that in this video?
@davidmassengill5290
2 жыл бұрын
@@RDeanOdell one of the many things I have already learned from you in previous videos
@rhutikkhare183
11 ай бұрын
😊😊😊
@SevenTimes249
5 ай бұрын
Pc dmis is far better than calypso
@mcdoogle274
4 ай бұрын
I disagree strongly.
@SevenTimes249
4 ай бұрын
@@mcdoogle274 first work with Pc Dmis then Give feedback
@mcdoogle274
4 ай бұрын
@@SevenTimes249 I’ve worked extensively with PC-DMIS for years, and while it is a very good software, Calypso is so much more powerful, especially when it comes to large projects. But that’s my opinion, PC-DMIS might be better suited for you. I’ve also worked with MCOSMOS from Mitutoyo, U-Soft Solid and WM Quartis with 17 years of experience, so I know my way around.
@JC-zv3bb
Ай бұрын
I have worked with PCDMIS and it's atrocious. It's some of the worst programming software out there.
Пікірлер: 48