See this watch online: goo.gl/7S4XPv
Discover Zenith with Govberg: goo.gl/qqKpLK
Greetings. I'm Tim of Govberg and welcome to the world of Zenith. Today, I'll be your guide to the proper care and usage of your Zenith El Primero 410. It's important to note that this automatic winding watch can nevertheless be wound manually, should it run down, by simply taking the crown in its first position flush to the case and turning it in a clockwise direction until the watch begins to beat. At the point that the constant seconds hand, at nine o'clock, is ticking, the watch can be placed on the wrist and the natural course of kinetic energy and daily action will continue to wind the watch via the automatic winding rotor on the reverse side. However, should you wish to wind the watch to its full power capacity of 50 hours, simply continue turning the crown, as you cannot accidentally overwind this automatic winding watch. The bridle style mainspring will simply slip and relieve excess strain.
Once you're satisfied that the 50-hour power reserve has been fully topped off, the watch sets in a fashion that may be unfamiliar to those not accustomed to Zenith El Primero calibers. The setting of the watch takes place in the second crown position, not the outermost. Be careful, as the watch should not have its calendar functions set between the hours of eight o'clock, eight PM, and four o'clock, four AM. Accidentally pulling the crown to its outermost position while attempting to set the time in that zone can accidentally damage the mechanism, so be sure to avoid setting the calendar during that eight PM to four AM range, 'cause that's when the automatic jumpers for the calendar are engaged, and attempting to set the watch manually during that period can damage the mechanism, but once you're in the safe zone and you're neither between eight PM nor four AM, you can then set the watch by driving the date window at 4:30. The date window, as you can see, drives the month. Pusher adjusters on the flanks drive the moon phase and the day of the week.
Now, the timepiece should always have its crown replaced after you set the time or you set the date. By pushing it back into its flush position, you ensure the hermiticity of the watch as rated from the factory, which is 50 meters in the case of this timepiece. It's important to make several notes with respect to water, because that's a significant factor in the care and maintenance of any luxury watch. First and foremost, no leather strap is water-resistant. Leather is a natural porous material that will degrade rapidly in the presence of water and even contact with extreme moisture, so keep your straps separate from water.
It's also important to note that you should never use any of the functions of the watch. The chronograph pushers should not be actuated, the crown should not be wound nor used for setting, and the pusher adjusters on the flanks should not be depressed when the watch is submerged or when there is water on the case, as this can result in water bypassing the seals and becoming trapped within the watch. This can cause significant damage, so take pains to avoid it. Moreover, water-resistance is not a static feature of a watch, and it can degrade over time as lubricants dry up and seals age, so be sure to take the watch to a Zenith-authorized service center on an annual basis to ensure that the watch continues to meet its 50-meter water-resistance as rated from the factory.
It's also important to note that magnetism is a significant concern for owners of traditional mechanical watches, as the watch's hairspring, at the heart of the balance, can become magnetized if it's exposed to professional magnetic resonance imaging equipment, speakers, subwoofers, high-powered wiring looms, or refrigerator doors, so take care to avoid magnetic fields when wearing the watch, and if you suspect your watch has been magnetized, take it to a Zenith-authorized service center where it can be quickly and easily de-magnetized on specialized equipment. Moreover, it's important to avoid shock with this timepiece. Sports such as mountain biking, motorcycling, boxing, shooting, golf, or batting should be avoided while wearing the watch, as the shock can damage the movement.
Finally, it's important to note that with respect to service, service every three to five years, recommended by the manufacturer, with exclusively authorized dealers, independent retailers that are authorized by Zenith, and company-owned stores. It's important to service only with these authorized agencies as these agencies alone have the proper trained personnel, specialized equipment, and original factory replacement parts to maintain the integrity of your watch as both an instrument and an investment.
Негізгі бет Zenith El Primero 410 03.2097.410/51.C700 Functions & Care
No video
Пікірлер: 1