The quality isn't that great but he made the install look so easy. I thought it was going to be a lot more complicated than that. If a kid using channel locks as crimpers and old socks as rags can do it, anyone can.
@ART_BUILTT
5 жыл бұрын
10 years old ! And this video helped me out perfectly on my 97” cobra my first nitrous kit,installed my zex kit in lil over an hour...
@myalterego9042
5 жыл бұрын
I just bought a 96 cobra last Saturday and was debating on getting a nitrous kit. I just might go for it.
@juju755-b7s
3 жыл бұрын
Neat
@madmod
3 жыл бұрын
I just picked up a used zex kit for $200. Thanks for this video.
@codykambeitz5946
11 жыл бұрын
that is the best damn video ive honestly have ever seen on youtube!!!!!.....
@RJon2006
9 жыл бұрын
Great video. Very helpful. Finished my install this weekend and used this video a lot. I do not recommend using the battery as the 12V source. If the switch is left on it will drain your battery. I used a fuse location in the fuse box under the dash for my 12V supply.
@ZEXHPAdders
9 жыл бұрын
RJon2006 Thanks for watching - glad it helped!
@Compcams1976
11 жыл бұрын
Thanks so much Cody, we appreciate it!
@Compcams1976
12 жыл бұрын
Glad you liked it, thanks for checking out our channel!
@Compcams1976
12 жыл бұрын
Glad we were able to help!
@Compcams1976
12 жыл бұрын
Thanks for watching, we're glad you liked it!
@ownTer
12 жыл бұрын
You forgot the one most important tool for working on cars.... DISCONNECT THE BATTERY!!!! But a very nice video. Thanks for sharing and taking the time to upload the video.
@Compcams1976
11 жыл бұрын
It really depends on how you want to use the nitrous. We make a turbo-specific nitrous kit part# 82218, which is only used to help spool the turbo, then it shuts off at a user-selected amount of boost pressure. Many customers prefer to spray the nitrous all the way down the track. One of our universal EFI wet nitrous systems part# 82021 can be used for that type of scenario. Thank you.
@jpcs302
15 жыл бұрын
Thanks for the video. I was always a little leary about installing the kit myself but now I think I can do it. Thanks again. great illustration, direction, and lighting. Good Jobs guys.
@Compcams1976
12 жыл бұрын
A "wet" kit is ideal for both normally aspirated and forced induction applications. It can require a little bit more installation time than a "dry" kit, but is easier to tune if greater than stock HP settings are to be experimented with. A "dry" kit is excellent for normally aspirated combinations that have a return style fuel system. They are very easy to install and are a great "first time" nitrous system. It is not recommended that "dry" systems be used on forced induction engines.
@crashlife487
5 жыл бұрын
Great video man, great detail.
@Compcams1976
11 жыл бұрын
As with any nitrous kit, it is only as safe as the tune. We would suggest having the car dyno tuned for that big of a hit and using race gas with the nitrous. Hope this helps. Thank you.
@MrPlasticdinosaur484
12 жыл бұрын
Dam after watching this vidio,I think I'm comfortable doing the install myself.nice job
@juansegovia6443
3 жыл бұрын
Love it, this video doesent have the best quality but sure is quality information🙏
@Compcams1976
11 жыл бұрын
We recommend changing spark plugs to 2 steps colder than stock and having a PCM tune for anything over 75 HP shot. Hope this helps, thank you!
@Compcams1976
12 жыл бұрын
Thanks so much, we're glad to be able to help!
@mrelectron6220
4 жыл бұрын
Nicely done install the only thing I cringed about is crimp on connectors but I realize not every one can solder but thats the way to go when doing wiring if you can.
@nkimokc1
3 жыл бұрын
Still a great video in 2021
@Compcams1976
11 жыл бұрын
We don't have a video on that process specifically unfortunately, but we are also looking for potential topics. Thanks for the suggestion!
@offof2
12 жыл бұрын
Very well done video! Clean Mustang GT too!
@Compcams1976
12 жыл бұрын
@123rides We can't wait to hear how she runs after the install!
@Compcams1976
12 жыл бұрын
@mikemillzzz You will need a way to back the timing down for the nitrous if you spray over a 75 shot. Other than that nothing is required.
@Compcams1976
11 жыл бұрын
Yes, just use the highest octane fuel you can find locally at the pump.
@bamaboy741
11 жыл бұрын
Could you guys maybe do a nitrous express install video. I know that their system set up is a little different than zex. If you could that would be great!
@thetwig187
14 жыл бұрын
way to go...very well done!!!
@andrewmapes8205
4 жыл бұрын
great video
@colemanreinarz4086
4 жыл бұрын
awesome video, i’m trying to install the same thing in my 98 mustang. Where do i attach the fuel lines to the tank itself?
@TheModAddict
4 жыл бұрын
Fuel lines to the tank?
@VtecdippinBB6siR
11 жыл бұрын
A good kit would be to start with a dry shot. I don't think you will need any special kits to install on 4v 4.6 if you run a dry shot.. Make sure you get it tuned rightaway, dont use it till its tuned! From that dry kit you can expand to wet shots and move past 125 shot hits, but make sure you tune.. the shop that tunes your car for you, will be able to peice a no2 kit together for your cobra. But its not recommended till you familer yourself with the basic dry shot nitrous kits first.
@123rides
12 жыл бұрын
Love it I'm 16 nd I can't wait to install it on my car
@Compcams1976
12 жыл бұрын
You do not have to at all, but of course your car will make more power with those additions.
@Shaker1000
12 жыл бұрын
excellent job!
@ryanjofre
13 жыл бұрын
Kick ass Install Video. I'm not easily impressed and you kicked ass!
@Compcams1976
12 жыл бұрын
Thank you!
@jameslaiola4976
6 жыл бұрын
very good video sir. i realize my question might sound stupid sir. and please forgive me. but i have a 96 camaro that has this system on it. and i want to remove it. but im not sure how to do the computerized process. if you know how. i will gladly give you my setup
@Gmoney35446
11 жыл бұрын
I have a 1998 cobra with a 100.000 miles the car has been take real good care of I really want to run your zex it but im a little worried about my engine is this a pretty safe set up for my car also I cant seem to find a a kit designated for my car 1998 cobra 4v modular motor please help I really would like to do this but im not sure witch route to go thanks for the great video
@runescpaeownzz99
6 жыл бұрын
Here is a homemade tool i made, here is a coat hanger .. lol that’s American ingenuity! ;)
@Compcams1976
12 жыл бұрын
Thanks for watching!
@Compcams1976
12 жыл бұрын
@mikemillzzz The 82023 kit is what you will need for that year model V6 Mustang.You can check it out on zex.com. Thank you.
@manuelturizo6552
4 жыл бұрын
Is it possible to program the nitrous management tps while having the car in first gear(off ofc) and flooring the pedal?
@Compcams1976
12 жыл бұрын
Yes, this is compatible with a supercharger.
@badazzstang03
12 жыл бұрын
Don't ever stock the nozzle 6-18 inches away from the throttle blade. It should be 3-6 inches away. Just a little mistake I caught.
@VtecdippinBB6siR
11 жыл бұрын
This is dry kit right, not wet? I thought wet kits plug to the fuel injectors or something? Please correct me if i'm wrong, it is how I learn most my shit. and How do you know thats the right spot to tap into the intake, without charging one cyclinder harder than the others? Thanks for showing simplicity of niotrous install. I will be Installing a kit soon, except ill run my n2o line inside the intake pipe, and im mounting the bottle in my dash board, in the airbag comparment. Nobodys gonna know
@joe5.097
5 жыл бұрын
This is wet kit. He getting fuel from fuel rail and spraying at same time. Dry kit is all nitrous. And no fuel.
@XALTEREGO1
12 жыл бұрын
Well i found out the hard way, the way your tapping into the fuel rail doesn't work with a 2000 Mustang Gt you have to buy the fuel pressure solenoid adapter from Zex Pt#82236 to connect fuel to the control unit
@andresjdmfull
13 жыл бұрын
best video nice!!!!
@shampoolaide9851
7 жыл бұрын
Hey I know this old but I just installed the wet kit and I'm having a few issues. I tried programming it normally and it works but when i go to turn off the switch and turn it back my solenoids fire rapidly even when I'm not on the gas pedal. Wat could that be? Thabkd
@ricoboyd6103
3 жыл бұрын
Is that on a 4.6 or a 5.0
@Compcams1976
11 жыл бұрын
Some engines don't require any modifications, while others will require a few minor adjustments or upgrades. Your best option is to contact the ZEX help line at 1-888-817-1008 to talk to one of the techs about the viability of running nitrous with your specific engine application. Thank you.
@erickochoa3288
9 жыл бұрын
Thank you
@VtecdippinBB6siR
11 жыл бұрын
Nitrous is just like boost, except instead of mechanicly inducing oxygen to the combustion chambers through compression like a turbo/supercharger; nitrous induces oxygen in the cylinders chemicly. You ask if itll be fine on a 100,000 mile motor? It'll last just as long or longer than if you slapped a turbo on that motor, but if you abuse it, it wont last long turbo or no turbo.. Same goes for nitrous. When used in safe amounts, it is safe to your motor. If your all about winning, it could be bad
@DingDangg
11 жыл бұрын
In order to install a Nitrous kit on your car what mods or adjustments must you do to your engine?
@bengrayson6883
11 жыл бұрын
Do you need to upgrade anything when you add this?
@bigchesse7308
7 жыл бұрын
I have a stock speed density foxbody do you think 100 shot would be OK
@ZEXHPAdders
7 жыл бұрын
A 100hp shot should be fine on a foxbody with a 5.0 v8. I always recommend starting with the smallest shot in the kit, usually 75hp, then work up to 100hp.
@asv4k8
12 жыл бұрын
Good job man, i like to document my projects too:
@shanei.7008
11 жыл бұрын
I've got a mazdaspeed3 that's turbo charged. Do I need to get a kit made for turbocharged engines or can I just get a basic kit and have it installed?
@royboyq
13 жыл бұрын
do you need to do any kind of programming for this year mustang to run the nitrous?
@mikemillzzz
12 жыл бұрын
After i install this is there any tuning that has to be done?
@colbynlopez6808
3 жыл бұрын
No tune needed?
@jacobr1215
6 жыл бұрын
can you use this wet kit on a returnless fuel system?
@SonnyMiller
10 жыл бұрын
I have a 2013 KIA Optima SXL 2.0L Turbocharged engine. And a K&N Typhoon cold air intake installed. Because the GDI engine is electronically fuel injected and doesn't have a vacuum operated fuel pressure regulator. I'm planning to buy a ZEX Turbo Wet Nitrous Kit, part# 82218. But, I'm a bit confused about what's the correct place to install the nitrous jetting nozzle. I've been told to only install the nozzle after the turbo, between the turbo and throttle body, but not before the Oxygen sensor. This is my first import. So I'm having trouble figuring out which side of the turbo is correct. Also, I can't seem to find the fuel pressure regulator, fuel rail or the fuel hose. So that I can connect the fuel to the nitrous system. Does anyone know of a website where I can find detailed drawings of an engine for a Hyundai/KIA 2.0L Turbo engine?
@brothersofthebackrow
9 жыл бұрын
you are trolling right?
@svt_guido
5 жыл бұрын
What adapter do i need to use my shrader valve as my fuel suppy?
@joshmarauder
12 жыл бұрын
I wonna get nitrous in my 2003 crown victoria...whats the difference from wet n dry systems
@Vayro-Lawr
11 жыл бұрын
Will 91 octane be okay? Us calis don't have the option of 92 :(
@Adamjc5311
11 жыл бұрын
Do you have a video for a wet install on a carb'ed v8?
@mikemillzzz
12 жыл бұрын
Is this compatible with a supercharger?
@Thedealershipguy
9 жыл бұрын
Anyone help me out? I have a plate system and cannot figure it out! I dont understand how to plumb the solienoids!
@atvsarebeast
10 жыл бұрын
my friend want to sell me his nos kit ( everything ) for 300 dollars, its off his 89 5.0, my question is will this fit my 99 cobra and pretty much be the same proccess?
@Compcams1976
10 жыл бұрын
Unfortunately you most likely won't be able to install that kit on your 99 Cobra. Your best bet is to contact the ZEX tech line at 1-888-817-1008 to discuss the best option. Thank you.
@SharpArizona
10 жыл бұрын
I have a really big problem!!! I got an old Zex kit.. like 1st gen. no button or light on the NMU. its a dry kit that hooks up to your tps. nothing is happening. no idea how to program it. its all hooked up properly. i have voltage and power to everything i need but the solenoids are not engaging. any ideas????
@Compcams1976
10 жыл бұрын
Your best option is to contact the ZEX help line at 1-888-817-1008. If you explain the situation to those guys they should be able to help you out. Thank you.
@SharpArizona
10 жыл бұрын
Yeah i did that. they werent able to help me at all. I explained to them my unit and everything and they looked at instruction manuals from 2004 and couldnt find a thing. With the Zex dry kits with no LED or learn button it automatically learns where WOT is from the TPS. no programming needed. its a really old unit.
@Compcams1976
10 жыл бұрын
Another option may be to try to post your question in the Tech Support forum at CPGNation. There often are other users there in similar situations or that have the knowledge needed to help solve your problem. Thank you.
@davissvt
7 жыл бұрын
can i use the Schrader valve hookup method on a 96 cobra
@aaronturner123456
8 жыл бұрын
what kit is this one? I have a 96 ima gonna spray debating on what kit to get
@ZEXHPAdders
8 жыл бұрын
The nitrous kit is part# 82023. Thanks for your interest!
@c00l3zt
12 жыл бұрын
Should i get an aftermarket exhaust/headers before installing nos to my stock 01 eclipse?
@ws-mitch3256
7 жыл бұрын
c00l3zt Tbh You should get an aftermarket Catilic converter because after using nos on mine it melted my stock Cat right down the middle.
@valdoalmada
9 жыл бұрын
I have a question, where do you put the wot/tps switch at? I can't figure out
@ZEXHPAdders
9 жыл бұрын
Osvaldo Vargas These are the instructions from one of our kits - hope this helps. Take the white wire fromthe Nitrous Management Unit and connect it to the Throttle Position Sensor output voltage wire. The correct TPS wire will have around .5 volts when the throttle blade is closed and around 4.5 volts when the throttle is opened fully. These are not exact voltage numbers, but simply give you an idea of the proper voltage you should be seeing. Use the supplied red T-tap connector and tap into the voltage output wire. Attach the red crimp-on blade connector to the white wire from the Nitrous Management Unit and plug this wire into the T-tap.
@viruetd5
9 жыл бұрын
+ZEX Nitrous Hi. I bought a Zex kit and I have a bmw e30 1990. . I have questions with the white wire
@christophermyers5709
10 жыл бұрын
Is a tune necessary, for this kit?
@Child_Support_EK
9 жыл бұрын
Not for Wet Kits
@Shaker1000
12 жыл бұрын
can you do a video on a c5 ls1 corvette?
@mikemillzzz
12 жыл бұрын
Does anyone know if this kit can be installed on the 2002 mustang v6?
@raygillen308
10 жыл бұрын
Cool.
@musicplus4969
7 жыл бұрын
Wooooooow.....
@123rides
12 жыл бұрын
So u just have the arming switch where's ur nitrous button
@TheUnendingJourney
7 жыл бұрын
What is a big company like COMP doing supplying such a low quality video? Not the video quality itself, but the individual in the film is using a pair of channel locks to crimp an electrical connection.
@Compcams1976
7 жыл бұрын
We shared the video, but it was produced by one of our distributors. Tough to say why those choices were made. Thanks for watching!
@bullitt3839
5 жыл бұрын
This video was made years ago. Way before people started make a living off KZitem. It was actually really good for the time.
@disabledvet420
10 жыл бұрын
it is also a good idea to have a purge kit. with out it, you might run in to problems.
@aracecar4627
10 жыл бұрын
lol no you wont.... all a purge kit does is pushes nitrous through the lines to clear out any air thats sitting inside.... its by far a necessity,
@pjbadgersuw26
12 жыл бұрын
It's actually a liquid when it's in the tank.
@loku1125
11 жыл бұрын
i need to do this to my 96 gt
@adambagwell1719
9 жыл бұрын
Funny how he said thread seal isn't required but he had some on the fittings.
@Compcams1976
11 жыл бұрын
Sounds great, feel free to give us a call at 1-888-817-1008 if we can help with anything!
@Compcams1976
11 жыл бұрын
If you call our tech help line at 1-888-817-1008, our guys will be happy to help you pick out the best ZEX kit for your Cobra. Thanks so much for your interest!
@Compcams1976
11 жыл бұрын
We have a universal Mitsubishi system that you can purchase at zex.com, or feel free to call 1-888-817-1008. Thanks for your interest.
@Compcams1976
12 жыл бұрын
We do offer 4-6 cylinder wet nitrous systems, give our techs a call at 1.888.817.1008 and they'll be happy to get you fixed up with the best system for your Mustang.
@christopherneville8252
7 жыл бұрын
COMP Cams Honda VTX 1800 2005 accessories to make go faster
@christopherneville8252
7 жыл бұрын
2005 VTX 1800 accessories to Meiko faster
@jacobgomez2682
6 жыл бұрын
1:23,,,, his Hurst shifter for banging them gears, send it,,,, ,,,
@96redpony
12 жыл бұрын
very nice video! but you sound 15..bet that gets you some tail at school..
@jarrodhenderson545
12 жыл бұрын
all this for a damn tank of air
@Compcams1976
11 жыл бұрын
Thank you!
@user-pe5vz5qw8e
7 жыл бұрын
will the same in this video apply to a 2000 3.8l v6?
@Turtlefarm
Жыл бұрын
Can someone help ?? I have the same kit.. but rather than wide open throttle I want to run a window switch… which will control the solenoids based on throttle position and rpm’s that i set using the switch.. with that being said.. my question is will the zex solenoids spray if I don’t program the box and use it’s wot feature?? Do I not use the tps wire on the zex box?? Or do I tie it in with the window switch’s tps wire?
@toneyrocha469
8 жыл бұрын
I bought the same system for my 01 mustang gt 5 spd . is a window switch required?
@ZEXHPAdders
8 жыл бұрын
A window switch is not required, but it is a good accessory to have, especially on a five-speed car. Unfortunately, we do not make a window switch any more. MSD makes a digital one that works well. Hope this helps, thanks for watching!
@toneyrocha469
8 жыл бұрын
Thankz for the help the video also helps alot very simple to install
Пікірлер: 121