*The only downfall **do7.pl/ZStabilizer** I found is the rosette mount. Admittedly, I had to return my first Weebill S because the rosette mount is screwed into the soft aluminum body by and hand full of tiny screws which have very short lengths and small threads. When mounting my monitor using a bracket from SmallRig, the rosette mount snapped right off of the body and stripped the screw holes and could be repaired. I wish Zhiyun had used a harder steel for that portion of the body so that the screws didnt strip the holes so easily.*
@ZokZTM
5 жыл бұрын
Thanks Brad, very helpful stuff! One thing bothers me, the triple lock does lock every button APART from the power on / off button. This should be addressed as I have accidentally powered off the Weebill numerous times (especially when using both hands to operate, which is very much to my liking). This should be addressed as follows: Triple clicking the LV button locks''ALL'' buttons (including the power on / off button!). But when ''ALL'' buttons are locked, the pressing of LV or POV button together with power button will power off the gimbal... This is in case if anything goes terribly wrong and Gimbal needs to be shut off in the emergency. Keep up the great work!
@deel7114
5 жыл бұрын
what really sucks is if someone like me who always use the All follow F mode but dislike holding the button to maintain all the time , so when my phone run out of the battery , BOOM! and frequently mess up with the power off button as well, I am thinking maybe I should use my Plus as well, rather than this gear.
@DeltadronesBr
5 жыл бұрын
Looks awesome! I'm going to Iceland and it would be a great gear to carry. Very small.
@djmanganelli
5 жыл бұрын
I want use the follow mode (f) on zhiyun webill lab, without press the front button or use phone for make it. I think that the mode (F) is more important of the mode (pov) that have a dedicated button
@ExigentFilms
5 жыл бұрын
Same here, did they release a firmware for this?
@johngaleano1291
5 жыл бұрын
Turning on full-follow mode (without having to keep the front button pressed) is now possible with the latest firmware (v1.88): hold the trigger to engage follow mode, then tap the 'LV' button 3 times to lock all of the controls. This keeps the trigger locked on. To unlock, just tap the "LV" button 3 times.
@vTvvo
4 жыл бұрын
@@johngaleano1291 OMG THIS IS GENIUS!!!!!! WORKED PERFECTLY THANK YOU SO MUCH
@johngaleano1291
4 жыл бұрын
@@vTvvo no problem brother. Glad I could help!
@mariusblidar
5 жыл бұрын
Hi Brad. Again ... awesome. A very good tutorial. I'm glad to see you again. Thank you.
@betrion7
5 жыл бұрын
Production value on this is amazing! Great work!
@TVCANAL5
5 жыл бұрын
Datos en consideración para lo siguiente: 1 los modelos de cámara que no figuran en la tabla se probarán en el futuro de acuerdo con la valoración del mercado. 2 SONY A7/A7S/A7S2/A7R/A7R2/A7M2/A6000/A6300 no es compatible con la apariencia fotos traseras o vídeos. Las fotos tomadas con panorama y timelapse no se pueden guardar en la cámara. 3 para SONY A7/A7S/A7S2/A7R/A7R2/A7M2/A6000/A6300, no encienda el estabilizador en el modo de vídeo al aplicar la función de transmisión de imagen. Si necesitas usar el modo de vídeo, enciende el estabilizador bajo otros modos y cambia de nuevo al modo de vídeo. 4 cuando la cámara SONY se conecta al laboratorio WEEBILL bajo el modo de vídeo y necesita conectarse a la grabadora o dispositivo externo HDMI, el dispositivo externo no está disponible. Cuando el laboratorio WEEBILL se conecta a una cámara SONY con la función Steadyshot, parte de las cámaras se apagará automáticamente. 5. La transmisión de imágenes no está disponible para la Sony A7/ A7R / A6000
@NATO714
2 жыл бұрын
Hi, I have this gimbal and I was wondering if there is a vertical mount/plate I can use to film vertically? Please advise
@qiangtien7280
Жыл бұрын
Yah i was wondering the same
@1NATURELOVERJ
2 жыл бұрын
Very helpful. However, without using the phone app, how do I keep it in "Follow" mode? Keeping my finger on the trigger while shooting an 8-hour wedding makes the pad of my finger go numb.
@JunaidKureshi
5 жыл бұрын
Thanks for telling about locking the keys, my 2nd most Complaint just resolved, 1st is we cant turn on Follow mode directly from gimbal with holding front trigger, and the 3rd is holding go button to keep ur gimbal in sports mode, this should had some option.
@ZhiyunTechGlobal
5 жыл бұрын
You can use the app to switch to different modes.
@arthura777
5 жыл бұрын
@@ZhiyunTechGlobal Of course, BUT full follow mode needs to be enabled all time not only by app or holding the trigger button (which is exhausting) but by a physical button on the gimbal!! Also I don't see support for Canon DSLR models which is stripped for no reason as it was working like a charm on my Crane 2!! Come on ZHIYUN you can do better than this!
@visualsbypreet
5 жыл бұрын
There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
@visualsbypreet
5 жыл бұрын
@@arthura777 There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
@arthura777
5 жыл бұрын
@@visualsbypreet thank you so much for your precious tip! I have another one if you have discoverded it.. that is if there is an AUTO CALIBRATION button as it is in the DJI RONIN and MOZA AIR 2??
@LennyandSandi
5 жыл бұрын
Thanks, Brad...well done! EXTREMELY informative!
@ZhiyunTechGlobal
5 жыл бұрын
Thanks for your support!
@nicholassmith7723
5 жыл бұрын
Love the over the shoulder hack
@Freehelper
4 жыл бұрын
My V mode is not working. it just rotates a little and stops. Please tell me where is the problem?
@sergetenenbaum6080
4 жыл бұрын
hello, i have this gimbal coupled with a sony A7s. While the movie record button works ok, i cannot find a way to shoot pictures either by pressing the center wheel button or by the mobile app...
@ggerman
5 жыл бұрын
awesome tips throughout the video, thanks! but please consider smoothing out the S-sonsonants in the audio with post processing, this slightly lisp-ish voice sounds quite harsh with the headphones on.
@styflymalaysia311
5 жыл бұрын
Hi bro good video 👍👍👍... can you tell me how to lock subject on the side while walking straight. So the gimbal will continue focus on to subject...somesort like a hyperlapse
@ZhiyunTechGlobal
5 жыл бұрын
Try to use lock mode and keep practicing!
@minhle24qs
4 жыл бұрын
Vì lens sony 18-105 có power zoom nên tại sao lại phải dùng motor riêng để zoom? Lens Sony 18-105 có thể zoom bằng mini tripod GP-VPT1. Zhiyun có thể viết lại firmware để dùng núm zoom để điều khiển zoom lens có power zoom không?
@markymaarty
5 жыл бұрын
Thank you for the great tip! Is there a way to get the iPhone/smartphone responsive? It’s always delay when I move the camera and gimbal. Is there an alternative accessories to mount an external camera monitor like the Atomos Shinobi?
@ZhiyunTechGlobal
5 жыл бұрын
The delay is related to the environment interference and the camera hdmi output rate. We are doing our best to improve it.
@markymaarty
5 жыл бұрын
Zhiyun-tech good to know! Thank you!
@galocascio
3 жыл бұрын
Why do you had remove fuctions to this gimbal (Weebil LAB) in the Zhiyun App??
@NickHaigh
3 жыл бұрын
was thinking to buy this but one thing comes to mind, don't the buttons/control pads get in the way? yes you can lock them but surely its uncomfortable as your hand would cover them so you have less grip? anyone have this issue? thanks
@achdigitalphotography711
4 жыл бұрын
Hi Brad, thank you for the tips, I need to shoot video from a helicopter and need to lock just the roll movement so I can keep the horizon strait. I haven’t found how to do this. Please let me know. Thanks
@animalbloggers
5 жыл бұрын
Are there any remote controllers compatible with Weebill? Like "ZW B02" or "Motion Sensor Wireless Remote Control" I wish to have real joystick remote control, not phone screen.
@ZhiyunTechGlobal
5 жыл бұрын
Unfortunately no
@cfwproductions
4 жыл бұрын
Same
@Gigawipf
4 жыл бұрын
Do you seriously have to use the external motor to control the zoom on the 18-105 motor zoom sony lens which can be controlled via the camera and usb? I thought the cranes already support zooming via usb. Why not the weebill?
@afukov
4 жыл бұрын
did you take an answer?
@tjsn-4vision
4 жыл бұрын
I just received my weebill s yesterday. My joystick moves up and down but not side to side. Can you help me with that?
@kupawat
4 жыл бұрын
Please upload some video of weebill lab with z6 its getting hard for me to use it with Z6 nikon
@Groucho3321
4 жыл бұрын
Hi, I cannot adjust pan/tilt manually. When the gimball is on, the motors prevent me from adjusting it manually (and no, the axis are not locked)
@63MacGuy
5 жыл бұрын
Great video! Will I be able to put my Manfrotto RC2 adapter on so I can continue to use the QR that I use for everything? I use a A6500 and Sigma 16mm f1.4
@ZhiyunTechGlobal
5 жыл бұрын
Make sure the combo can be balanced.
@samibakri1391
5 жыл бұрын
I just order Zhiyun weebill lab and it will reach my home after 3 days, will it work fine with Canon EOS 70d and its default lens? Because i couldn't find my camera type in the compatibility list.
Is it possible to record with the iPhone 11 Pro on the Webill lab gimbal?
@taylorball7833
4 жыл бұрын
Is there a way to adjust the speed of vortx mode? And why is mine not always able to perform an entire roll?
@anonymouse7074
5 жыл бұрын
3:21 what if I have an HDMI cable coming directly down from the camera? Are you saying the Weebill will not fight the cable's resistance?
@shibunarendranathan9996
4 жыл бұрын
Great video! 1:17 did u miss the link to compatibility list?
@shibunarendranathan9996
4 жыл бұрын
Found it in the official website: zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@lucrativestance
5 жыл бұрын
Hey I just bought the webill lab. And I have a gh5 with a 12-60mm Panasonic lense. My set up weighs about 2.5lbs and it does say it holds up to 6ish lbs. I am worried about the compatibility list since it does not show my lense . Would that be a problem? With using the gimbal?😳
@ZhiyunTechGlobal
5 жыл бұрын
This lens can work. Make sure it is balanced and change the motor strength to high.
@BomJimmy
5 жыл бұрын
Please make a test video with Full frame Sony and GM zoom lens. Most people found that this is not ble to control even 3.5 lb payload (and 6.6 lb is just a fake claim)
@ZhiyunTechGlobal
5 жыл бұрын
Please check out zhiyun-tech.com for the full compatible list. Thank you.
@TheMabiNerd
5 жыл бұрын
This may sound like a stupid question but how do you activate the blutooth signal on the LAB? I tried using the app and it cant find it.
@ZhiyunTechGlobal
5 жыл бұрын
it will turn on automatically
@TheMabiNerd
5 жыл бұрын
@@ZhiyunTechGlobal Thank you for the response! I realized I had it looking for the wrong device. lol
@jessyca9833
5 жыл бұрын
I've been looking endlessly if the zhiyun weebill lab can follow while being on the tripod e.g. when using it while vlogging talking to the camera and the camera can follow me while I move around. Can it do that?
@al201103
4 жыл бұрын
The app has a 'follow target' function, so it should be able to do it. How well will it track? Don't know yet, haven't played with this. Just got mine and pretty damn happy with it so far!
@24FPSTALKIES
5 жыл бұрын
Hi, I am using sony a6300 paired with 18-105 g lens. When I connect my phone and camera to the gimbal,I get full control except for taking pictures. I am not able to click pictures using the gimbal handle or through the phone. Now because of this, I am not able to use the timelapse option or even the trajectory motion-lapse as it cant click.
@ZhiyunTechGlobal
5 жыл бұрын
It is a known issue and we are working on it. Please check zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@mariusblidar
5 жыл бұрын
Hi Brad. Again ... awesome. A very good tutorial. I'm glad to see you again. Thank you.
@24FPSTALKIES
5 жыл бұрын
@@ZhiyunTechGlobaloh ok cool I hope it will be resolved soon. Yea I have checked the list and mine is Sony a6300 as I said so it should support all functions.
@bekirdonmeez
5 жыл бұрын
yeah l have the same problem l cant take pictures weebil lap its only focusing but not taking picture for time lapse
@prithviraj7587
5 жыл бұрын
@@ZhiyunTechGlobal Thanks, Brad... EXTREMELY informative!. Issue, shutter button half-press to focus and its works. However full press is not taking the picture. I'm using Sony A6300. Is there any specific setting in the camera, please let me know
@circuitoandante
5 жыл бұрын
When supporting a 3kg load, is it possible to use Nikon DSLR cameras (D600 specifically)?
@ZhiyunTechGlobal
5 жыл бұрын
It is not recommended to use dslr on it
@TheJigFreak
5 жыл бұрын
if i pair the weebill with g7x camera, can i take pictures or start recording by pressing the button on the weebill? (example long press for taking pictures etc)? can the weebill be paired with the g7x? cheers
@ZhiyunTechGlobal
5 жыл бұрын
G7X is not supported.Check the support list here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@animalbloggers
5 жыл бұрын
Is it possible to connect more than one smartphone/tablet to control playback?
@ZhiyunTechGlobal
5 жыл бұрын
Unfortunately no
@davianrod8843
5 жыл бұрын
Is there a reason why my vortex mode is slow
@ZhiyunTechGlobal
5 жыл бұрын
Now you can adjust the speed in the latest firmware.
@marufhossain2729
4 жыл бұрын
this one I have compatible with Canon 80d sigma 18-35mm
@husseink64
5 жыл бұрын
When u lock the front buttons, does the record button get locked as well?
@ZhiyunTechGlobal
5 жыл бұрын
The whole front pannel will be locked
@emirhancengelli7938
5 жыл бұрын
Hi I bought the device today. I use it with the Sony a6000. I'm having trouble taking pictures. It focuses when I press the shutter button halfway down but it does not take the picture when I press it fully. What could be the reason?
@ZhiyunTechGlobal
5 жыл бұрын
Please check it here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@nandocanton
5 жыл бұрын
Amigo, qual a diferença entre os dois modelos de motores de foco? Quero comprar e estou na duvida. Possuo um WeeBill Lab!
@ZhiyunTechGlobal
5 жыл бұрын
Could you please describe it more clearly? thanks
@nandocanton
5 жыл бұрын
@@ZhiyunTechGlobal qual a diferença entre CMF-03 (lite) e CMF-04 (max) ?
@ZhiyunTechGlobal
5 жыл бұрын
03 for focus and 04 for zoom
@Harnam99
3 жыл бұрын
half the features not working in this gimbal
@animalbloggers
5 жыл бұрын
Is it possible to make compatible Weebill Lab focus control with Tilta Nucleus Nano motor?
@ZhiyunTechGlobal
5 жыл бұрын
It depends on whether you can balance the combo or not
@ELFMEDIA
5 жыл бұрын
@@ZhiyunTechGlobal I haz balanced properly, may be able to use Weebill focus wheel with Nucleus? There is no more space to mount two focus wheels )
@ZhiyunTechGlobal
5 жыл бұрын
@@ELFMEDIA No it can only support the weebill lab focus motor
@zoot69uk2001
5 жыл бұрын
my Canon M50 works great except the shutter buttons, balances fine even with the screen out and a wide angle lenses if anyone is interested
@fahadhaniff
4 жыл бұрын
hi. my weebill lab keeps on vibrating in some angles and today i tried vortex mode and it wasn't working and my motors strenght was hig and i am using sony a6300 with sigma 30 mm. kindly help. gimbal was stable.
@ZhiyunTechGlobal
4 жыл бұрын
Make sure the pan axis is correctly balanced.
@oscarfabianbarradaaguilar1127
3 жыл бұрын
I got an x on the weebill lab screen someone with the same problem
@robsondantas321
5 жыл бұрын
Hi! I have a question! When I plug my Sony A7iii in the Weebill Lab, the steadyshot turn off automatically. Can I use the steadyshot on, with the cable plugged on it?
@ZhiyunTechGlobal
5 жыл бұрын
It is a known issue. We are working on it and sorry at present it cannot.
@robsondantas321
5 жыл бұрын
That’s ok! Thank’s a lot!!!
@stefangimpl4138
5 жыл бұрын
hey Brad. do you know how to save the control rate parameter settings in the weebill lab? so that once you have changed them in the app the stay that way even after turning the gimbal off and on again without using the app? thank you
@ZhiyunTechGlobal
5 жыл бұрын
At present, the custom settings can only be saved in the app.
@stefangimpl4138
5 жыл бұрын
thank you for the answer. please change this if possible in a future firmware update.@@ZhiyunTechGlobal
@ZhiyunTechGlobal
5 жыл бұрын
@@stefangimpl4138 We will forward your suggestion to our developers.
@rozyislam8367
5 жыл бұрын
Can i comfortably use it.. With my canon 77d?
@ZhiyunTechGlobal
5 жыл бұрын
Someone tried with short prime lens. You can do a search in youtube.
@nikos22patra
4 жыл бұрын
Hello, i want any plate for weebill lab to fits in at manfrotto mvmxpro500
@GautamVariya
5 жыл бұрын
lumix gh5s not working with zyplay app
@ZhiyunTechGlobal
5 жыл бұрын
Make sure your camera has been set to pc+tether mode. Check the settings here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@dronemaneuvers
5 жыл бұрын
@@ZhiyunTechGlobal hi, the panorama is not working on gh5 with zy app. it records the movement but nothing has been recorded in the camera (pictures). timelapse works fine but skips some frames. thanks.
@serag6308
5 жыл бұрын
Where the link with camera/lenses compatibility at?
Hi Brad, I have a question. Is it possible to slow down the maximum rotation speed of the Weebill lab? With my other gimbal, the Zhiyun crane v 2 it is possible to adjust the maximum speed via the app. But I couldn't find this option in the ZY play app. If it is possible for the Weebill lab too, can you explain me how to do this? I thank you in advance. Jack
@ZhiyunTechGlobal
5 жыл бұрын
If you mean the speed of vortex mode, you can adjust the speed with the latest firmware.
@kucing714
5 жыл бұрын
@@ZhiyunTechGlobal Thanks for your reaction!
@FGgurski
5 жыл бұрын
I am contacting you because Weebill Lab displayed the following message on the display: UPDATE and right after the message looks like an X, any function is impossible to perform. I wonder if there is any solution to this?
@ZhiyunTechGlobal
5 жыл бұрын
Sorry please contact your seller for aftersale service if you meet the x issue.
@FGgurski
4 жыл бұрын
@@ZhiyunTechGlobal me seller says they can not do anything, asked to contact the manufacturer. I would like a solution because I use Weebill for work.
@Nxtsuu
4 жыл бұрын
I use a 5d mk iii, and orderd this, so I cant even use this ???????
@cipriansamihaian5705
5 жыл бұрын
Hi. Anyone tested it with a Canon 5D Mark IV and a Canon 16-35mm lens? Would that work? (those have about 1.2kg, less than that camera holds, but I'm worried about the size of the Camera on weebill. Thank you.
@giangnguyentranlam5632
5 жыл бұрын
Ciprian Samihaian sorry man, this is not for canonians or nikonians. Just sell it and switch to sony and u ll be fine.
@kismet77
2 жыл бұрын
Anyone know if this gimbal can fit my Sony AX43?
@zhiyunsupportglobal706
2 жыл бұрын
Sorry, it is not in compatibility list.
@qiangtien7280
Жыл бұрын
The compatibility list isn't there
@hebehe462
Жыл бұрын
This is Weebill Lab camera compatibility list:zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20220714/1657787566825-NbD8GFNP.pdf
@maskmanbonsai5658
5 жыл бұрын
WHY GH5 IS not Oprate With Zhiyun Weebill Lab
@ZhiyunTechGlobal
5 жыл бұрын
Camera should be changed into PC+tether mode
@doriangibbs
5 жыл бұрын
My Canon T7i is not on the camera list. Will this gimbal work with this camera?
@ZhiyunTechGlobal
5 жыл бұрын
Sorry it cannot control canon cameras
@doriangibbs
5 жыл бұрын
Excluding the control, will the gimbal support the weight and size of the canon t7i. Basically can I balance this camera with a EFS 18-55 lens?
@ZhiyunTechGlobal
5 жыл бұрын
Some users will use 80D with kit lens or prime lens. You can do a search in youtube :)
@EmanuelPremate
5 жыл бұрын
What’s the point of there being a USB port on the Weebill Lab if you can’t use it to charge the batteries?
@ZhiyunTechGlobal
5 жыл бұрын
For factory use
@rafaeldelapaz6737
5 жыл бұрын
hi i have a question I bought zhiyun crane 3 lab and I have a Canon XA10 camera. Can I connect the zhiyun crane 3 lab remote control cable to my camera to start and stop video recording?
@ZhiyunTechGlobal
5 жыл бұрын
No it doesn't support the video cameras
@rafaeldelapaz6737
5 жыл бұрын
@@ZhiyunTechGlobal I just wish I could start and stop the video recording. What cable can I use? I don't need the other functions of zhiyun crane 3 lab. just start and stop recording with the crane 3 lab recording button
@ZhiyunTechGlobal
5 жыл бұрын
@@rafaeldelapaz6737 It is not about the cable. It is a camera control protocol issue.
@rafaeldelapaz6737
5 жыл бұрын
@@ZhiyunTechGlobal I understand and in question of the video transmission through the HDMI cable if it works with Canon XA10?
@rafaeldelapaz6737
5 жыл бұрын
I also have a Canon 200D Canon EOS Rebel SL2 camera. Is it useful to use the recording button of the Zhiyun Crane 3 Lab? And what cable should I use?
@Sanny13th
5 жыл бұрын
Hey, anybody connected Zhiyun Weebill to A73 for using record button on the gimbal? I have sony cable from previous pair a6500 and crane M.. Trying to do same thing with new set.. No success =(
@Sanny13th
5 жыл бұрын
please ignore it cuz I did it! =)) after watching "Connect to Zhiyun Weebill LAB Image Transmission"
@jochenretter
5 жыл бұрын
Hi, is there any hack to get the Weebill Lab into follow mode without pressing a button continuously and without any app on the phone? thx
@ZhiyunTechGlobal
5 жыл бұрын
At present it cannot.
@jochenretter
5 жыл бұрын
Could we look forward for a firmware update on that? Would be so great. TY
@ZhiyunTechGlobal
5 жыл бұрын
@@jochenretter We'll forward your suggestion to our developers. Thank you.
@visualsbypreet
5 жыл бұрын
There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
@visualsbypreet
5 жыл бұрын
@@ZhiyunTechGlobal There is a way, Press and hold front button to be in follow mode then simultaneously triple click LV to lock and stay in follow mode
@LifestoryDocofilm
5 жыл бұрын
I can not balance my GH4 camera with a microphone on it. why? (12-35 lens)
@ZhiyunTechGlobal
5 жыл бұрын
Try to use some counterweights because the mic will change the barycenter.
@LifestoryDocofilm
5 жыл бұрын
@@ZhiyunTechGlobal Hi, I do not have weights, They were not part of the kit I bought. I do not know there are any. But if I had weights, how would I put them on the gimbel? Until now nothing helped. I can not record quality sound with the gimbel. Perhaps you will spend a video in favor of connecting additional items such as microphone and others that affect the balance. Thank you
@ZhiyunTechGlobal
5 жыл бұрын
@@LifestoryDocofilm Thanks for your suggestion and later we'll release some accessories like that. At present you may need to find some common camera accessory like cages to try with the mic.
@LifestoryDocofilm
5 жыл бұрын
@@ZhiyunTechGlobal Thanks
@giangnguyentranlam5632
5 жыл бұрын
I dont get it. The weebill works perfectly with my gh5 and 12-35 lens. Why it didnt with your gh4???
@RobertBilling
5 жыл бұрын
Many people don't know if Webill Lab works with Sony A7iii and 24-105 f4 or 16-35 2.8 GM lens. Please make a video about this, I think you're loosing lots of customers due to the bad video reviews with people not making it work.
@ZhiyunTechGlobal
5 жыл бұрын
Please check the camera support list here zhiyundata.oss-cn-shenzhen.aliyuncs.com/zyplay/binary/supportmodel/WEEBILL%20LAB%20Camera%20Compatibility%20List%20(EN).pdf
@kiddmaff5646
5 жыл бұрын
+Robert Larsson It kinda works with the a7iii works with the 16-35 gm. I've gotten it decently balanced although you won't be able to go into flashlight mode because the eyepiece will hit the rear motor. I was able to rig some counter balance weights which allowed me to use the gimbal as intended but it just wasn't an ideal combo. I opted on getting a lighter weight lens combo for the weebill lab and the Ronin S for a more robust set up. Look into the samyang 24m af f2.8. Beast of a little lens with great autofocus for a very cheap price. Good Luck!
Has anyone figured out how to lock F mode without a phone yet?
@johngaleano1291
5 жыл бұрын
Turning on full-follow mode (without having to keep the front button pressed) is now possible with the latest firmware (v1.88): hold the trigger to engage follow mode, then tap the 'LV' button 3 times to lock all of the controls. This keeps the trigger locked on. To unlock, just tap the "LV" button 3 times.
@jammin023
4 жыл бұрын
This video, while useful, simply describes how to use the controls in the way they are intended. That is the opposite of "hacks".
@Bobbylopezcreative
5 жыл бұрын
Where are the hacks? The only hack I see is the tool on screen.
Пікірлер: 177