Enjoyed the video and the input all have a blessed day Randy.
@D00MTR33
11 жыл бұрын
As per rj martin s110v is the king if knife making steels but a pain in the ass to work with. He said he charges a lot more for a s110v knife than other just because hiw hard ut is to grind, heat treat and work with. Plus its more expensive than other steels but the knife yoy get out of it is second to none. I would love to have a good s110v knife sometime in my life, but its goid ol s30v and cts xhp for now. Nice video as always john.
@CliffStamp
11 жыл бұрын
John, as a suggestion, take a basic pattern similar to the Spyderco Mule which you can offer in whatever steels you are using. This will offer your user base a chance to check out different steels very readily which can be ordered as desired unlike the Spyderco Mule's which are basically dedicated sprints. Of course you can use them as benchmarks as well.
@jdavis882
11 жыл бұрын
I'll be there this week, no questions. House stuff is completely done! :)
@CliffStamp
11 жыл бұрын
John, I would suggest you pick a basic steel for a pattern you can make and use it as a reference, 154CM for example Cardboard is highly variable but if you always use the same reference you can minimize that variability and allow a very quick qualitative check.
@BahmannBlades
11 жыл бұрын
Also keep the videos up, missed the great knife videos
@CliffStamp
11 жыл бұрын
The brazing temperature is very high and you would not want to subject the blade to it after hardening unless you had a way to isolate the heat to that area which likely has cost implications they wanted to avoid.
@fatkid8523
11 жыл бұрын
Thanks for the info cliff!
@xxbryan715xx
11 жыл бұрын
I would really love to get one of your knives soon
@CliffStamp
11 жыл бұрын
In regards to carbides, the carbides in S110V and similar steels are about 10 microns or so at the largest aggregates. I doubt this is what you are feeling on the edge as the exposed average size would be about half, so 5 microns, this is tiny (0.001" is about 25 microns). Mostly likely you are feeling the micro-fractured edge as that is how those high carbide steels wear unless the edge angle is very high.
@sickjohnson
11 жыл бұрын
Great video again. Love that S110V! Would it push cut before you cut all the cardboard? In my ignorance I would assume that the blade geometry would be the the big issue there? It is pretty thick. Thanks again for all the information.
@shurdi3
11 жыл бұрын
Damn that's pretty good quality for a phone
@Hutzjohn
10 жыл бұрын
Is it my imagination or did the Spyderco Para2 in S90V do better than this? As I recall you cut 9 feet (216 cuts) of 1/2 inch rope and it still push cut the white printer paper, the phone book paper it would still slice cut. I am waiting for you to do the Manix2 in S110V, it should be really awesome, any idea when you might do it? And thanks for all the tests you do even though they are not scientific they are still extremely useful.
@jdavis882
11 жыл бұрын
I can put you on the list for that run if you'd like. Just email me your name, number, and what you're wanting and I'll put you in the books. :) My email is in the description.
@donotstealmythunder
11 жыл бұрын
I remember reading an RJ post that S110 is arguably his favorite (on JerzeeDevil forums), but that it's incredibly tiresome to grind and takes a long ass time.
@roy7420
11 жыл бұрын
John do you think you will get the zt0801 in m390 steel? Since you are now making knives by th way can't wait TI
@fatkid8523
11 жыл бұрын
Why couldnt they harden the cutting edge before brazing it?
@shurdi3
11 жыл бұрын
Where is the mic positioned on this camera?
@BahmannBlades
11 жыл бұрын
When will you talk/test ZWear? And what are your thoughts on the new PD-1 Micro Melt?
@roy7420
11 жыл бұрын
Till you do your next batch. What is your top 3 steels?
@jdavis882
11 жыл бұрын
Lol you're entertaining.
@donotstealmythunder
11 жыл бұрын
kershawguy sells em for about $350
@glytch5
10 жыл бұрын
paper and cardboard is so hard on a knife.
@CoonassJedi
10 жыл бұрын
It depends on what you are trying to asses. S110V is made for extreme abrasive wear resistance so cardboard is a good gauge of that quality. It is often made with components that can abrade steel fairly quickly. Its certainly not perfect, but no test is.
@weizenale88
11 жыл бұрын
So Kai is shutting down their sub forum at blade forums wtf ??
@jdavis882
11 жыл бұрын
Yeah I think 425 is a bit too much. A lot too much really.
@jdavis882
11 жыл бұрын
This is a phone.
@CTKTMRIDER
11 жыл бұрын
Live TNK however he's way over priced for this knife!!
@nelsonmartinez1554
11 жыл бұрын
Dog still wearing diaper? No more third story, you're a home owner. Lol cut it loose it in yard.
Пікірлер: 30