I have been operating a Zund G3 L-3200 full time at a graphics shop for 2-1/2 years. I can honestly say I absolutely love my job and wouldn't trade it for anything els other than to work for Zund! Finally I have found my passion!
@whothisss4whothisss47
4 жыл бұрын
What are some ideas you’ve gained in terms of creating ur own designs to sell?
@Armor_Heart
Жыл бұрын
how do you set the z-offset for a cutter that is 35mm long and has a diameter of 4mm? without dividing the machine into two halves?😂🤟
@highvis_supply
8 жыл бұрын
you have saved the lives of many EPFL architecture students with this machine.
@ZundTube
8 жыл бұрын
Thank you @Gundamrules301. That´s great to hear such a feedback - makes us proud ;-) /tna
@davedave7904
2 жыл бұрын
gotta love that Z46 blade
@roberthrescan6142
10 жыл бұрын
I work on Kongsber XP, but this machine... WOW! I WANT IT!!!
@ZundTube
10 жыл бұрын
No problem ;-) Just fill out this form and we will provide you with more information: www.zund.com/en/g3-contactform Have a great time!
@Dowg-man
4 жыл бұрын
You have to try it out. It’s another level!
@doasyouwill
11 жыл бұрын
I seriously would drop everything and move to Franklin, WI to work for you guys! Phenomenal Router!
@ardianr6110
7 жыл бұрын
im from indonesia . . im operator machine zund since 7 year ago..i loved zund ..amazing machine . .
@MAMAwHolandii
6 жыл бұрын
i working also with zund in Netherland :-)
@BangOrcs69
6 жыл бұрын
wew ada orang indo.. tolong bikin tuttorial tentang zund dong bro gw pen tau cara masang piso zund trus nyeting register nya.. gw mau di pindahin jadi oprator zund .. blm ada pengalaman -_-
@ZundTube
6 жыл бұрын
Hi Hendra. What kind of tutorial are you looking for?
@BangOrcs69
6 жыл бұрын
its all about zund Special for beginners like me I work in a printing company in indonesia .. i work in finishing and within a week boss i change my job to become oprator zund .. and i do not know to use zund at all!
@BangOrcs69
6 жыл бұрын
please teach me like registering camera replace the knife set the depth
@reclaimamerica9527
6 жыл бұрын
I'm trying to find a video that teaches you to operate the zund. They have them at my job and I'd like to get ahead by learning to use the computer part of the machine
@ZundTube
6 жыл бұрын
Hi Red Pilled Goy, maybe you can get in touch with our local service team via serviceus@zund.com or call them directly +1 4144 330700 - they will support you with all the information you are looking for.
@doasyouwill
11 жыл бұрын
I operating a Zund G3 L-3200 full time at graphics shop. I can honestly say ever since
@edjones220
8 жыл бұрын
I've worked with a zund for years love the machine, but I'm sure I'm not using it to its full capacity. I've started a job and have finally got to use the G3. but I need help finding my way around the software as it's different to my old one. are there any tutorials on line?
@ZundTube
8 жыл бұрын
Hi Ed Jones. Have you already seen our tutorial area in our KZitem channel? I'm sure you will find any answer you are looking for. If not, don't hesitate to contact us again. Good luck, tna Link: kzitem.info/door/PLlisgYauQkmlrdzHJnnayV9PPdD0180ZB
@preciousjemz
3 жыл бұрын
Can I ask a question. In a fabric cutting; how to make it faster a bit.
@ZundTube
3 жыл бұрын
Hi. It depends on what machine configuration you are using. It would be much easier if you send your request to support@zund.com directly incl. the necessary details like machine type, tool, module, etc. So they can give you the correct answer.
@josairbraz
5 жыл бұрын
A dream!!! I love too this machine!
@ZundTube
13 жыл бұрын
What you maybe hear is a special regulation algorithm which makes the drive system much more rigid and precise.
@cnccarving
5 жыл бұрын
cool i just asked my friend from jinan next time they are in hingkong sure checking the belt conveyor.. like to have one on my machine
@l.8979
8 жыл бұрын
Does the Laserpointer positioning also work if only the Laserpointer is built in and not the ICC camera module?
@ZundTube
8 жыл бұрын
Hi. You have two options to chose. First laserpointer incl. the camera module and secondly the laserpointer without camera. To answer your question: yes, the laserpointer positioning works also without the ICC camera.
@vishnusadat2843
9 ай бұрын
Zund cutting machine chalane ki month celery kitani hai
@busaj383
3 жыл бұрын
Wonder if these are difficult to service...
@ZundTube
3 жыл бұрын
Absolutely not.
@busaj383
3 жыл бұрын
@@ZundTube Well that is good to know 🙂 Thank you
@rickvanmaanen8478
7 жыл бұрын
is there a movie on how to change the flatbelt inside the DRT tool?
@ZundTube
7 жыл бұрын
Hi Rick. At the moment we don't have a video regarding your request. But if you have a specific question in this case you can get in touch with our service department directly via service (at) zund.com - hope that works for you.
@georgetanton4535
5 жыл бұрын
Rick van Maanen bgb
@carloquilop1746
8 жыл бұрын
How much is the machine? Do you have outlets in asia?
@ZundTube
8 жыл бұрын
Hi Carlo Quilop. Please get in touch with one of these offices: Zund Asia, Ltd. Room 911, 9/F. Eastern Harbour Centre 28 Hoi Chak Street Hongkong T +852 2561 1812 infoasia@zund.com Zund Asia (Bangkok) Ltd. 120 Silom Road Kasemkij Building 5th Floor Room #570 Suriyawongse Bangrak Bangkok 10500 Thailand T +66 2632 9869 infobkk@zund.com Hope that information is helpful for you. Best regards, /tna
@karlaagui2688
2 жыл бұрын
How can I cutting with point reference ?
@ZundTube
2 жыл бұрын
Hi Karla. Setting the reference point on a Zund G3/S3: Move with the keys the laser pointer to the place you want to start. Push the F8 Key +3 (define reference point) You can also set the reference point from the ZCC software in the Interactive mode. For more detailed Information please contact your local service partner. Hope we've understood your question correctly.
@kushagrakumar1992
6 жыл бұрын
Can it cut polycarbonate sheets?
@ZundTube
6 жыл бұрын
Hi Kushagra. It depends on the thickness of the polycarbonate. Up to 1 mm should be no problem. If it's more than 1 mm you've to use a router.
@万海民
2 жыл бұрын
how much is it?
@ZundTube
2 жыл бұрын
It depends on the configuration of the machine. If you need more information, please send a request to info@zund.com - *tna
@karla2O11
8 жыл бұрын
how much would one of these tables cost?
@ZundTube
8 жыл бұрын
+GEORGE SANDS Hi George. If you can give me your e-mail address i will provide you with the information you´re looking for. Thanks in advance. /tna
@myoung48281
8 жыл бұрын
My friend just got one of these and cutting coroplast the corners are terrible, any ideas?
@karla2O11
8 жыл бұрын
If your friend paid over 100g for a table maybe he should ring customer service rather than get his m8 to go on you tube.
@myoung48281
8 жыл бұрын
GEORGE SANDS he did, i'm trying to find a quick fix.
@myoung48281
8 жыл бұрын
GEORGE SANDS And your comment doesn't help at all , does it?
@jigdow
13 жыл бұрын
Great video.
@pepsico815
13 жыл бұрын
Why does the Zund always make groaning type noises?
@Garod55
6 жыл бұрын
what a fuuuuu****** i love this machine .... this is my new wife
Пікірлер: 73