Great job thanks , i have the zx9r e2 an just to clarify I would set idle at 2000rpm and the turn air screws to match across the carb sync tool , so there's no need to match carb 1&2 together and then 3&4 together as long as they line up .
@CRUZROYHelicopters
5 жыл бұрын
can you show process of hook up and plugs if you did..... thanks
@mcycle24
5 жыл бұрын
CRUZROY Helicopters 1 and 4 cylinders have the connectors already in place you just need to pull the rubber hoses off them, 2 and 3 have blanking screws you need to remove first and then replace with the same connectors as 1and 4 . I got some from a Kawasaki dealer. Then the carbtune hoses can be just pushed on.
@FullThrotle04
5 жыл бұрын
I have a problem with my zx6r 2002 model, the thing is when it passed 8k rpm the bike feels like its struggling and loses power exhaust sounds like its crackling or something. Also the rev is too slow to come back down.
@mcycle24
5 жыл бұрын
Gil Paña If the revs are hanging up and slow to come down it usually means there’s an air leak somewhere. Also check ram air pipe is connected properly at front fairing , See my other video on removing the fairings you have to disconnect this pipe to remove the front fairing. The ram air system must be connected to the carbs properly or the bike won’t run well
@FullThrotle04
5 жыл бұрын
@@mcycle24 how about the problem when i reached 8k rpm it feels like its hesitating for a sec then it will go back but the way it runs is diff. It feels like its loosing power and the sound is diff.
@mcycle24
5 жыл бұрын
Gil Paña Same thing, Ram air or carb float hight not set correctly, Unless it’s running an aftermarket exhaust in which case needs setting up to match with jet kit.
@FullThrotle04
4 жыл бұрын
@@mcycle24 do you have any idea how can i test my bike for air leaks? Cause the weird thing is once i rev the bike. It goes back down but it stays for 2k rpm for like 3 seconds then goes back to 1.5krpm. Is there anyway i can contact you? Any social media accounts?
@nitramh24
5 жыл бұрын
Great! At what rpm do you do the adjustments?
@mcycle24
5 жыл бұрын
nitramh24 I did mine at 2000 revs.
@joek1489
10 ай бұрын
Hi, where does the small clear breather hose on the back of the airbox connect to please? My zx9r is missing it and I cant work out where it goes, is it to the atmosphere? Thanks
Пікірлер: 12