Hey matey I dont know if you have put these on yet but if you haven't just make sure you line up the center stand bung otherwise your chain catches it
@hachewie
2 жыл бұрын
Looks awesome.
@juliansmith1608
2 жыл бұрын
I wasn't as brave and bought my Black Widow end can with link pipe with baffle in full 400 size to keep the fully finished look and noise down recently on my coverted 5th Generation Honda VFR. I'm very impressed with the Black Widow build quality. All new exhaust systems are much louder when new imo for 500 miles. I didn't get on with the industry standard exhaust clamps to collector box. Good luck with those. Maybe decent with fitting those inner gaskets in your kit. I also needed to use the gasket paste on end can and collector box end to seal it. It's a good weight saving and sound and big performance boost on my bike. Enjoy
@mcycle24
2 жыл бұрын
I fitted it today, Re used the original clamps for the link pipes, Exhaust is not too loud with baffles in.
@BaltimoreSP
2 жыл бұрын
Glad i read this mate - thought it was just me!! I received the 300mm ones- right side was a doddle although where the link pipe connects to the downpipes, ive ordered a new clamp. Left side is a complete pain for a couple of reasons - 1. Even with the spacer on, the swingarm still touches the exhaust strap- so may need to use 2 spacers. 2. Where the link pipe connects to the silencer doesnt seem to be all that tight so may use paste 3. Where the link connects to the downpipes im not happy with that fit at all even with the gasket in so may use paste and a new clamp. the end of the pipe doesnt look a perfect cut but ill see how i go
@johnbeardsley7360
Жыл бұрын
nice
@Adrian-wl7wq
2 жыл бұрын
Looking forward to seeing them on. I’ve got SP engineering exhaust on my zzr but find them too loud. Will you be listing the Nexus pipes on eBay ?
@mcycle24
2 жыл бұрын
The Nexus pipes are in tatty condition so I’ll probably just keep them for now, I have fitted the new pipes today so should have another video up tomorrow.
@BaltimoreSP
2 жыл бұрын
Mate. Mine has just arrived - the 300mm ones. Right side was a bit fiddly but got there in the end. Left side is a pain- even with the bracket spacer the exhaust strap is rubbing the swingarm. Link pipe is in the correct position- did you have any issues?
@mcycle24
2 жыл бұрын
Yes from what I remember I had to use longer bolts as the ones supplied were too short to fit with the spacer’s also.
@BaltimoreSP
2 жыл бұрын
@@mcycle24 thanks mate - i managed to get the spacer on and somehow bolt it on but it was still rubbing! Ill deffo get another longer bolt- can you recall if its an M5 or M6?. Link pipe doesnt seem tight either where it meets the downpipes but ill keep at it :)
Пікірлер: 12