Why not use a 5/8 inch gas or heater hose with clamps.
@noahjayden6684
3 ай бұрын
My mecanic put every perge valve on it even gas cap light still coms on but it wont throw the codes
@spitmk3
5 ай бұрын
Great detailed video!
@onemind369
6 ай бұрын
Amazing video bro thank you
@donshore7139
10 ай бұрын
Nice
@karltraveldude7817
10 ай бұрын
Thank you , my code reads 00446 it to mention evac valve .
@FordDude.
10 ай бұрын
Thank you for this video I just bought a 07 Colorado just like yours and I have been racking my brain trying to get my truck to pass emission for a week now. I've changed gas cap that was almost $100 bucks which was a stupid crazy price at the dealership and the thermostat which was $91 bucks at the parts store again another stupid crazy price for one of those. Thank you for showing the part #'s to both the solenoid and the adapter I found both parts on amazon for $36.80 USA because I live in GA in one of the few counties where we have to have emissions. I didn't know this truck had a charcoal canister or the solenoid so again a big thanks for showing how easy it is to change the parts yourself.
@adamhouk3373
11 ай бұрын
Do we have a part number
@FordDude.
10 ай бұрын
He showed both part numbers re watch the video
@cashbikes
Жыл бұрын
Thanks man you are a genius, I temporarily “fixed” the problem and I got no more codes, I did it almost as you did it just that I used a small 12v bulb and it cheated the computer, I tried before the solenoid valve arrives and it worked thanks to your video, thanks again for your knowledge.
@keithbohne3718
Жыл бұрын
I just got a 2011 and i cannot thank you enough! part to arrive tomorrow and will update once installed.
@jonesy4588
Жыл бұрын
changing this didn't help mine , still throws same code after the second time you crank it ,
@PhoenixRevealed
Жыл бұрын
Did you use my method for testing the solenoid with a test lamp, or did you just assume the solenoid was bad and replaced it without checking?
@jonesy4588
Жыл бұрын
@@PhoenixRevealed I found the problem it was a blown fuse , I have an extra purge valve now
@johncook708
Жыл бұрын
Thank you for not being retarded and talking about other stuff besides the video like your personal life your dogs your cats etc thank you so much for getting to straight to the point
@coolbreeze7706
Жыл бұрын
Do you know the part number for the wire harness
@kirbharp2157
Жыл бұрын
Excellent video thank you!
@danstone9743
Жыл бұрын
Thanks for posting this video. It was very helpful.
@rafelrose5914
Жыл бұрын
You are a techer
@Dentonboy
Жыл бұрын
TY for this video. Purchased a 2006 Canyon about 1 month ago used. It was showing the P0449 code. I bought the parts you recommended for less than 30 usd. Only issue I had was getting the vent hoses off. Worked on them for over an hour and decided to do it on the truck. The hole assembly hung down pretty good and I cut it off on the truck and then installed new one also. Thx for all the info to make this a fairly easy job and a lot more affordable. I reset the code and its running like a charm!
@michmvp
Жыл бұрын
A wire brush and a little lubricant would have made that bracket go alot easier
@IamFreeRu
2 жыл бұрын
I replaced the valve and hose. It came in one piece. The P0449 code went away, then about 2 months later I got P0442 code "small leak". Turns out the hose connection does not fit snug to the canister connection. So I am going to put some plumbers tape around the canister connection then plug the valve hose on. That should fix this new code.
@wysskey1
2 жыл бұрын
Thorough, I like thorough!
@carlosbenitez2222
2 жыл бұрын
Good información thank you
@chrismoore1794
2 жыл бұрын
Thank you for this video- I followed the example and it was pretty easy to complete the change. Great, easy to understand video!
@mlbechard5853
2 жыл бұрын
I want to say THANK YOU i just ordered the parts to do my Colorado
@AvidSurvivalist
2 жыл бұрын
It's a lot cheaper now, I can get the whole assembly including the hose and wire adapter for USD$57 on Amazon now.
@Ccam1190
2 жыл бұрын
Is this the same part for a 2012 Colorado 3.7L? I am beating my head on the desk with this stupid P0442 code. I am on my 3rd gas cap and I've also replaced the valve up on the front left of the motor
@potro.linares1562
2 жыл бұрын
Una pregunta es el mismo en laa izuzu l280 2006..
@frankmeister1743
2 жыл бұрын
Did It Help With Gas Mileage? My truck is Using A lot Of Gas
@karlosavalos907
2 жыл бұрын
Thanks you save me 140 buck's I pay 21.99
@mlbechard5853
2 жыл бұрын
awesome video , Now i can fix mine . New to all this Thanks for your help .
@christopherpotts8754
2 жыл бұрын
If there is rust inside the solenoid. What is my problem? A filler neck? Replaced the solenoid still have engine light after deleting it.
@valjean246019430
2 жыл бұрын
Thank you for taking the time and effort to show the extra details of what to expect and how to deal with them. Great Job !!!
@chipsawdust5816
2 жыл бұрын
Thanks for this video, all these years later it still helped me. I have a 2005 Colorado with this same code. Bought the H3 solenoid off Amazon (don't recall the price but it was cheap, and a Delco part). My truck has rust under there too. I just bought it not long ago and in doing this I found out I have no spare tire so that bit took less time! Although now I have to shop for a spare. You don't need them often, but when you do...
@jimmason2201
2 жыл бұрын
Thanks Martin! What a great video for addressing this issue. I especially appreciated you safety comments, like wearing eye protection was extremely benefitial.
@jsm9715
3 жыл бұрын
Had a hard time removing the 2 hose's so l was able to replace valve without removing them, just move it .
@Lukasjakson
3 жыл бұрын
I’ve changed this part and purge valve. My code reader doesn’t work on my Colorado. It works on other cars. If I can’t clear the codes, will engine light go off after driving a while? Or do you have to clear them? If so, will unplugging battery do the trick?
@PhoenixRevealed
3 жыл бұрын
Yes, it should go off after a while, but it could take weeks. The EVAP system is unique in that the test can only be run if very specific conditions are true. The engine must be stone cold, it must idle for some time before the test, and there are other obscure conditions that mean that the ECU often won't retest the EVAP system for days or even weeks after you fix the leak. Some people do an ECU reset after repairs to pass government smog testing to renew the plates, but it's not unusual for the EVAP system to be in an unknown state for a long time after this. Where I live they recently killed the smog test program, but when they were testing here you were allowed one "not ready" system report and still pass. I've had the EVAP system take as long as 3 weeks before my code reader showed it as green.
@GraciaYVerdad901
3 жыл бұрын
What’s the connectior part number ?
@nazmidaud2665
3 жыл бұрын
Thanx
@yellowdoghnut45
3 жыл бұрын
Amazon got them for 80$ and they come with the harness adapter
@dustinschings7042
3 жыл бұрын
Thanks Martin!! This may be helpful to others if you want to pin this comment. These parts are on Amazon Prime for about $30 total as of 6/16/2021. Just search for the items below. GM Genuine Parts 214-2324 Vapor Canister Vent Solenoid - $18.09 19257603 Adapter Evap Canister Vapor Vent Valve Emissions Evaporative Solenoid Wire Harness - $12.75
@ericbrainard4072
3 жыл бұрын
Chevy has a slightly different design for this valve. It’s body is more narrow and it has a tube sticking out of the opposite direction from the inlet tube near the top. Same part number. Worked on my 09 Colorado.
@deloisrichardson6054
3 жыл бұрын
Hi, I have a jaguar type 2005,,I have code po442,,can you show it to me, how it look,
@stevencarter4297
3 жыл бұрын
great video
@manuelleroux2232
3 жыл бұрын
Bonjour merci beaucoup vous m'avez beaucoup aidé pour le problèmes que je vais avec mon chevrolet silverado maintenant je pense que je vais pouvoir réparer encore une fois merci les vidéos sur sympa et en plus vous ai expliqué bien grand merci
@MrOliveira1111
3 жыл бұрын
Thank you!!
@rickferguson7992
3 жыл бұрын
worked for me thanks
@BenKempa
3 жыл бұрын
Pagf30 is the type of plastic used. Glass fiber reinforced 30%.
@MrNickelodion
3 жыл бұрын
I'm null of knowledge on evap system, but you what your mastering tour and explanation make me feel confident to give a try with it. I really appreciate your effort en dedication to explain all details about this subject, for me it's all clear now, thanks so much!!!!
@rauleascobedo2
3 жыл бұрын
why didnt you cleaned the bracket.
@chrissmith8691
3 жыл бұрын
Thanks Martin for taking the time to add every step along the way and not to mention how we all have saved $ because of your research into optionally parts!
Пікірлер