Will that work for Pontiac g5 09 model and will I need odb2 key programmer
@alrino9820
2 ай бұрын
p0014 is a code for camshaft position sensor. you are showing the camshaft actuator replacement.
@jokerjay-ot6zx
2 ай бұрын
We didn’t learn shit from ur video
@doubled5927
2 ай бұрын
I tried this and now my sister original key’s knocked out😢. I feel so bad, I didn’t have chance to press start because the message came up asking for key fob 3. It unlock, lock but will not start.
@doubled5927
3 ай бұрын
Thank you
@zerocoolgamming1670
3 ай бұрын
donde adquiriste el progrmador obs tendras el link
@jefferysmith5921
4 ай бұрын
This worked for my 2012 LaCrosse Touring. The instructions I received with the key were different and did not work.
@JaytovenTracks
4 ай бұрын
Mine doesn’t have that
@wfee7369
4 ай бұрын
Hello, Is it possible to post the part number and manufacturer? Your links do not work anymore. I found one from Dorman but it inly works 3 times and then stops.
@pridkerri
5 ай бұрын
I have to get new key fobs for my 2011 Buick Lacrosse, and I have not been able to find a video on how to program the push to start fobs. I'm going to try these instructions once i get mine because I do think this will work the same for my vehicle. Thanks!!
@SteveS-ir4cx
5 ай бұрын
Yes I think you this video is a blessing I have three vehicles that I need to program I thank you so much you popped up out of nowhere I am very surprised😂😊🙏💯🚗🧔😮
@SteveS-ir4cx
5 ай бұрын
The OBD program does it work for all vehicles and types of SUVs
@SteveS-ir4cx
5 ай бұрын
Question do that program is it does it work for all vehicles that little black 🐈⬛
@brookepageguitar
5 ай бұрын
It didn’t work for me because I don’t have the new key cut, so I can’t turn the new key into the unlock position five times. I did with my original key and the new fob locks and unlocks but won’t start the car. Thanks for the video. I found my Manuel, and it says you have to turn the new key 5 times. I have a 2014 Buick regal GS.
@guyandottewhiskers2331
6 ай бұрын
Too much talking get to the point
@wombatfour372
3 ай бұрын
No u
@geneanstevens7747
8 ай бұрын
Thank you soooo much. I have to buy the OBS Programmer. I will be doing this soon.
@danielblaz9758
9 ай бұрын
Those are not sensors, that is the VVT solenoids
@ConleyProduction
5 ай бұрын
Said the same thing in my head like that the vvt intake or vvt exhaust solenoid
@Mzcoco45
10 ай бұрын
What about a Chevy Malibu
@fitandhealthy4u
Жыл бұрын
Hope it works for my Buick Verano Also, as one of mine aint working, but it used to, assuming it unprogrammed
@fobrob
Жыл бұрын
This will work on a 2010 Chevy cobalt correct?
@indyhere
Жыл бұрын
Did you try this and your car got stuck in learning/programming mode? Do the does unlock but car wont start from the remote? Solution: press and hold the start button for 12 seconds then car will reset out of learning mode. Then start you car regularly
@LowellThePanda
Жыл бұрын
Did replacing the 02 sensor fix the code?
@michaelhyatt2815
Жыл бұрын
Thought I might have a bad fob but issue continues. Randomly my 2012 GS with manual transmission will not start. Message displays press clutch to start. I have replaced the clutch switch and problem remains the same. Under this no start condition I can jump the solenoid or relay and the engine will crank but not start. If I keep trying maybe after 20-30 tries if will start and run perfect. Not sure what to try next.
@wilianlemus1413
Жыл бұрын
Thank you!!!.I just programmed mine following the steps on your video and was perfect!!!.
@1112dejon
Жыл бұрын
can oil come spoil out of camshaft sensors
@jamesrobertson1745
Жыл бұрын
I have a 2011 buick lacrosse and watched your video and steps 2 with the key in the door lock with the display indicating a #4 so I assumed that my new fob was the forth one to be programmed. But when I completed your steps not only did my new fob not work but now my original does not work. I am stranded!!!!
@404SportzCardz
Жыл бұрын
Informative video!! Question? …. I have this same code on my 2013 Regal premium…did replacing the O2 sensor fix your problem? Or did you have to replace the Cat? Thanks!
@mxshyvlogs7106
Жыл бұрын
So, I did it, just like you showed me in the video, and the code is still showing up. Any reason why? This one says “B” Camshaft position actuator solenoid, I drove the car after fixing and the boost acted like it came back. Before when it was showing confirmed and pending, but now it’s permanent.
@mikebenge2853
7 ай бұрын
Was it your timing chain?
@eleshiasullivan7194
Жыл бұрын
Awesome, this was really quick and worked! Thank you!
@kirillm6
Жыл бұрын
Too annoying. This video can be done in 1 minute. Thousands of e extra words and the main idea in 10 sec.
@Speedraider366
Жыл бұрын
Hi, how did you get the GS on the screen?? Do you a mod??! Thanks
@gsxss3741
Жыл бұрын
Hey there! No mod, that's just the OEM nav screen for GS models. Hope that helps!
@Speedraider366
Жыл бұрын
@@gsxss3741 Hi, yes thanks and now to track down a navigation system. I got the 7 touch screen no nav.
@jackson1756
Жыл бұрын
Speak any slower. Waited to long to try to follow your directions now both my keys are locked out
@MrTravisemccloud
Ай бұрын
i know ummmm, ummmm, ummmm thats 1/2 the video
@laurieprue9419
Жыл бұрын
Can I ask why we can't play music
@saidhussein2679
Жыл бұрын
You forgot to tell how you can get the key to the door because it doesn't show you where to put the key ,,,,there's little whole the bottom of the hand door,,hold the door handle like you opening it hold it and put the key that whole while your hand holding open the handle and it should come off easily,,,you can do this only if you dont see your key on the door handle,,,,most Buicks the key is open but Chevy might not be open key
@vickiaylor7506
Жыл бұрын
My keyless 2011 doesn’t have a key space under the rubber cup holder. I wonder where it is on this model
@jamesdsettlesjr2084
Жыл бұрын
Tmi
@drewspinoso4849
2 жыл бұрын
Doors open but car doesn’t start
@briannairn3752
Жыл бұрын
Same here
@dallasrider8401
Жыл бұрын
Just remove disconnect the battery for a minute and I’ll turn on
@dr.neylon82
2 жыл бұрын
My husband was just stranded right now and I found your video and you get our car started thank you so much for the video
@jlb74a
2 жыл бұрын
if you get an after market replacement FOB from china, good luck... some work, some do not, do not blame it on the programming tool.
@gsxss3741
2 жыл бұрын
I haven't had any issues with them thus far
@malachipreston9366
2 жыл бұрын
can i leave the program in or do i have to take it out every time i’m not driving my vehicle?
@hardscaper2473
2 жыл бұрын
thank u, was helpfull :)
@pmbuckmaster
2 жыл бұрын
According to the BUICK MANUAL the new key must be inserted into the exterior door and turned to the UNLOCK position 5 times. Thanks for posting this, very handy.
@doubled5927
2 ай бұрын
Thanks what I had to do but now that’s all the fob do is lock/unlock. The original will not start the car. I feel terrible, this my sis car.
@tylergnyp28
2 жыл бұрын
My Pontiac shows a remote start option on the radio settings and I turned it on. My key fobs gonna be delivered in 2 days I’m wondering if the remote start would work since the Pontiac mentions remote start
@stevenruvolo499
2 жыл бұрын
does that programming also unlock the truck? or is there an extra step to program unlock trunk?
@gsxss3741
2 жыл бұрын
Yes, should work for the trunk as well.
@travistate2468
2 жыл бұрын
What if you lost your keys and went and bought a new key fob from dealership?
@348frank348
2 жыл бұрын
how much did the key cost??
@flightson55
2 жыл бұрын
I bought a reprogrammer for my 2009 Chevy cobalt LT and after I programmed a fob to it, my engine light came on. I ran the code reader and got a p0700 code and u0073 code. This makes no sense why it came on right after I did this but it’s been fine. I only have 89k miles. Any help/ideas why please?
@jnunez1203
2 жыл бұрын
p0700 it's usually a transmisión issue code and it's got nothing to do with the security system of a car..it was just coincidence I think..
@jnunez1203
2 жыл бұрын
have that p0700 my self before on a neon I would check the speed sensors I'm not sure exactly if its the input or output the one that grows that code ..I don't remember but I decide my self to change both anyway to avoid issues on the feature..lol
@SandraLopez-ym4oi
2 жыл бұрын
I did this to a 2014 buick verano and it work, but after I tried it showed no keys detected so I disconnected my battery cable for a few minutes after I put the cable back both keys work
@makeupgoddess3646
2 жыл бұрын
That ain't bed at all because a locksmith and the dealership is going to charge you about $200 and sum dollars.
@stevenshackelford1937
2 жыл бұрын
My Chevrolet dealership quoted $49 to program. But... my fob is not OEM , so I will find out when I get there if they can still do it??? Still waiting on the Locksmith, that does this sort of thing, to call back. Seems these youtubes are making this procedure appear way easier and cheaper than in real life!?? Have tried all the other methods of holding door locks with one finger - turn the ignition key several times, simultaneously pushing on certain FOB buttons, waiting 30 secs for locks to recycle... on & on. I have a 2005 2.2L L4 Chevy Cobalt, which has hardly ever given me trouble in the 6 yrs I have owned it.
@rlilley1775
2 жыл бұрын
Does it work if you have a remote start button on your remote?
@gsxss3741
2 жыл бұрын
If your car isn't equipped with remote start, the remote probably won't work.
@RickyBobby8711
2 жыл бұрын
I just did the new key works and remote starts but seem to still be in learning mode and will not start with brake petal and push start. It may start after it times out. Will see. You run into this problem after programming yours?
@savion710
Жыл бұрын
same problem I'm having. did u find the fix
@wilianlemus1413
Жыл бұрын
Me too, can you tell me please if you found the solution?😞
@indyhere
Жыл бұрын
If it gets stuck in learning mode, press and hold the start button for 12 seconds, then restart
@indyhere
Жыл бұрын
@@savion710if it gets stuck lress and hold the start button
Пікірлер