The bad: voice is bad. Cameraman thinks he shoots a Western for the wide screen. Focus!
@marktwain622
Жыл бұрын
Thank you.
@burningdieselproduction5498
Жыл бұрын
Dude, go to bead tonight knowing that one SMM owner loves you!
@lazarnicu
Жыл бұрын
Hi, is there a way to turn off the alarm after the car has finished the program? I know there is Reset but I would like to know if there is a way to eliminate the continuous Beep Beep that the machine does at the end of processing.
@gcodeprogrammer7695
Жыл бұрын
@Lazar Nicu Try changing setting 39 to turn off beep at M30.
@davidmexicotte9862
Жыл бұрын
Content is good but the quality is low. Haas needs to do better. Terrible sound and lighting.
@raymondzhao9557
Жыл бұрын
coooooool
@inhibited44
Жыл бұрын
Thanks for taking the time to do this. Just starting a cnc class and was overwhelmed by lecture in class. Came here and get to replay stuff to understand it better.
@MarZGamingForever
2 жыл бұрын
I'm starting a new job soon working with HAAS CNCs coming from the glass industry working with very basic 3-axis and user friendly CNC working centers. This video really helped me out and gave me confidence that I'll be able to pick this up quickly. Thank you for posting this
@sababayanati6158
2 жыл бұрын
Hello. I have a question.My Haas cnc machin has been stopped working and when fitter tried to fix that he turned off the machine and removed battery.after all we lost all the settings on this machine.what can i do?
@sababayanati6158
2 жыл бұрын
The Haas classic control is the worst control in these type of machines.That’s so isolated and operator is not able to work on it. Because of HSM codes and serial number.I wish I bought hidden hinge
@fender44
2 жыл бұрын
Voice Out of sync ?
@TruthbetoldtotheWorld
2 жыл бұрын
Thanks man, you’re doing great!
@aronbenner9811
2 жыл бұрын
im just learning and i apriciate this very much
@carlfischer6363
2 жыл бұрын
Will this work on the old control?
@gcodeprogrammer7695
2 жыл бұрын
It is possible on a older control but it is a different procedure.
@ameensn2846
2 жыл бұрын
Button fwd what does it mean pleas?
@gcodeprogrammer7695
2 жыл бұрын
Not sure what portion of the video your question is related to but I could have been referencing either the right arrow cursor button if working with the VPS templates or the ATC Forward button that will call the next tool to the spindle. Hope that one of those answers your question.
@ameensn2846
2 жыл бұрын
@@gcodeprogrammer7695 Thank you for answering! I meant the button below next to the word "spindle", in the machine i work on there is "fwd", "stop", "rev" - spindle. In other machines its written "cw" So this button move the spindle forward right? In a counterclockwise motion?
@gcodeprogrammer7695
2 жыл бұрын
@@ameensn2846 Yes that is correct. Spindle FWD would be the same as spindle CW. When the FWD button is pressed it will turn the spindle on at the last commanded RPM in the machine.
@shartingkhumbubbles7169
2 жыл бұрын
although I do appreciate the work and effort that went into making this video , the sound quality and picture is very poor . you should consider making it again with something better than your grandpaps VHS camera. I WANTED to watch and learn the buttons but just cant seem to hear it well and eyes cant focus on your video that is out of sync with the audio .
@ErikN1982
2 жыл бұрын
Can't someone just make this control to work with a PS2 controller?
@jbj3rd
2 жыл бұрын
Hell they come with a controller now
@evanorner
Жыл бұрын
Actually there is a proto trax manual/cnc mill that runs on Windows. someone said it is possible to somehow use an Xbox controller with it but I don't think it would do much
@ddburns82
2 жыл бұрын
How do you make this function active? Our machine is default to inactive.
@gcodeprogrammer7695
2 жыл бұрын
The value will read "inactive" until you set it to a position.
@angelinalawye4167
2 жыл бұрын
Thanks
@amarctivlog
3 жыл бұрын
Thanks
@amarctivlog
3 жыл бұрын
Hi,I'm Amar ,from India, good knowledge sir
@pramodghate6700
3 жыл бұрын
Sound Volume is very low.
@CONSERVATIVEONLYGENDERS
3 жыл бұрын
Can't hear the video dude! Pointless!
@genuzz
3 жыл бұрын
You barely can learn, badly audible, poor quality overall, no much encouraging in what he demonstrates.
@TruthbetoldtotheWorld
2 жыл бұрын
He knows his job trust me, take this for an experienced engineer with 3 engineering degrees 3 fields combined.
@listenwhileyouwork1367
2 жыл бұрын
No much English on your part huh? It's a free rundown of very important basics. Check your local community college for programs offered on these machines, it's fairly common.. then, once you've learned something please create the most amazing video ever for free and post it here so i can complain about every little stupid thing you do wrong or not to my liking. F***ing trolls.
@metalskirmish
3 жыл бұрын
And by the way, thank you so goddamn much man, I want you guys to know that what you're putting up on youtube is the kind of stuff that feeds families and makes the world a better place. Knowledge is the peacefull kind of power that changes the world gently, and for the better. Educate us stupid fucks and you better the lives of all around them. and for the love of god don't stop making videos, theres people out there who desperately need this.
@montoro1961
9 ай бұрын
Thanks
@metalskirmish
3 жыл бұрын
I work for family using a mill and lathe to produce gears and parts, and have recently come upon an opportunity to work for a CNC operator with a Haas machine. This is a treasure trove and I've rewatched your video multiple times and have taken about 8 pages of notes. Can you give me some advice before I start working for this guy, man? How do I avoid fucking up this guy's beautiful machine, and how do I go about educating myself appropriately? If you had a dream apprentice, what would they be looking out for and paying attention to? Do i need to buy a whole darn machine to get my grubby paws on that owner's manual? Should the manual be my new bible, or do you have any good reading material for an aspiring tech?
@gcodeprogrammer7695
3 жыл бұрын
@metalskirmish I've added a link below to the Haas Website for the current machine manual. Best advise I can think of when starting out is just don't rush. Slow the rapid overrides down and watch your "distance to go" display. If you see your tool 1" from the part and it says it needs to travel another 5" in rapid you are able to stop a crash before even touching the part. The manual is a great resource to have, it will help a lot if you are familiar with the contents. Good Luck! www.haascnc.com/owners/Service/operators-manual.html
@bradleyherk9052
3 жыл бұрын
This guy is the most boring trainer I have ever watched. I’m sure he knows his stuff but I would not let him train,
@TruthbetoldtotheWorld
2 жыл бұрын
Because you do not basics of CNC machining if you knew a little at least, you would have thank him for clarity and nice pace on de-mystifying the haas control.
@listenwhileyouwork1367
2 жыл бұрын
You sound like a snotty little girl and a someone that I wouldn't work for. "The most boring trainer ever" let me guess you grew up in one of those fancy privileged areas with schools that teach you like you are royalty? You'll surely be one of the co workers i can't stand working with someday (if not already), complaining about everything, ruining to HR weekly.
@behrouzkhan7366
3 жыл бұрын
Awesome. Thanks, Please release more videos Sir. 🤘🙏
Пікірлер