hi, any idea to solve the freeplay wheel problem? btw nice ff.
@kelvinmrrc3289
7 ай бұрын
Hi mate , if you buy the genuine hsp items , with the addition of a few shims you should eliminate the slop , I race this car and it has to be a good fit , unfortunately if you buy the knock off one from China you will have fitment issues .
@cliffblom23
7 ай бұрын
Do you have a link where to buy?
@Dave_Smith_OnWheels
8 ай бұрын
Thanks for the video, like others I've had difficulty finding info on the D5 clone. I have the MR which I'm happy with but I wanted the rear mount too, but couldn't find an original D5 within my budget. My clone should arrive in a couple of days but after watching your video I think I'll order a second one just because at $A160 why not? Cheers, Dave from Western Australia. 👍
@PeterHewat
8 ай бұрын
Thanks for the review. I just ordered the exact same kit. Could you post links to the upgraded parts you replaced please ? It would help me out seting it up right when i receive it.
@PeterHewat
8 ай бұрын
Just read your comment about getting a genuine 3Racing 48 pitch spur gear. Ok but how many teeth ? I ordered a 10.5T motor just like you.
@PeterHewat
8 ай бұрын
And how many teeth on the pinon ? I see there are metal ones available on Aliexpress. Are they any good or should I stick to plastic?
@PeterHewat
8 ай бұрын
One last question... Is there a ratio on the belt drive ? Or is it 1:1 ?
@kelvinmrrc3289
8 ай бұрын
My guy hope this helps a.aliexpress.com/_mtRvDeY Keep your spur gears plastic nylon material just like proper 1/10 touring cars Go and buy pinion gears 48pitch from 9-15 tooth , and just test to see what best works for your motor as every motor is different , you’ll know if you are running efficiently by being able to place your fingers on the motor after your runs , if you can’t keep your finger on the motor for more than 5 seconds , then the motor is running too hot and is over geared. Don’t worry too much about the drive ratios as what matters is what your motor is doing. Have plenty of spur gears and pinions so you can find the sweet spot , if you have a motor dyno then you can fine tune timing to what’s best at 7amps.
@PeterHewat
8 ай бұрын
Thanks for the reply, I'll get a set of varying tooth pinions and spurs and see what works best for my setup. Cheers
@dannysdailys
8 ай бұрын
Now that you have enough metal in it to keep it from breaking, it's very heavy and will start bending and snapping axles. Especially if you put a real motor in it. If you try Redcat hardened axles, it'll just shear the pins. These trucks are 8 year old tech and are junk. There's nothing you're going to do to make it any better except get something a lot newer and lighter like a Hosim X07. And this is not a sales pitch for the Hosim, just an honest comparison. I own both. The HSP/ Redcat Volcano is also 2s only, even on the brushless car. If you run 3s the cars will self destruct before your very eyes. Sorry, but that's the way it is. The Hosim, at 199, is 100 dollars cheaper than the Redcat brushless Volcano after you account for the batteries. Redcat comes with none and wants 62 dollars for it, plus a charger. The Hosim comes with 2 half size batteries and a charger, included. It also comes with a Deans parallel adapter so you can join them together and double the capacity.. The Hosim also has oil filled shocks and metal everywhere it's needed. Metal uni-axles both front and rear, metal steering gear, metal A arm pin retainers, metal skid plate, metal diffs, metal pinion and spur gears, metal steering knuckles on the front axle, and metal C cups on the back axle. All the metal you need, and no metal you don't need. The Redcat only comes with metal diffs and uni-axles. The Hosim is a much better thought out truck than either Redcat or HSP and they've had 8 years to think about it.
@utoob047
8 ай бұрын
Hey there! Just found this vid after lots of sifting thru international content. Finally an Aussie perspective on this "clone" D5! I'm the same as you (except I don't own a sweet 1/1 scale drift car 👍😋) having bought this roller as a cheaper alternative to enter the drift game. Got it recently but still getting it together. Spent two days shimming & thread-locking the whole car to help eliminate slop, and had wondered if the genuine 3Racing bulkheads were worth doing due to dubious plastic thread security, so thanks for answering that one 👊 And the poor quality spur gear teeth 🤔 I'm glad it's not just mine then! Thanks for your efforts to get some more information out on this machine. Plans for updates, running vids or longer term tests?? Cheers!
@kelvinmrrc3289
8 ай бұрын
Hey Jase, sorry for the late reply , glad I could help , unless your really focused on competing, then I’d probably hold of on the bulkhead upgrades as they are quite excy, the car will run fine with the plastics , but I can never run anything without all the bling . I’m just trying to find time in getting my shell done as I’m very time poor , hopefully I can get a running vid with the Z body in place . Best of luck with your D5 journey.
@utoob047
8 ай бұрын
@@kelvinmrrc3289 all good man, thanks for the feedback 👍 I'm up to the shell too, also a Nissan (Silvia), using it as an excuse to challenge my limited painting skills 😆 Keep up the good work!
@andrewhenrique6106
8 ай бұрын
Parabéns pelo projeto ficou muito bom, infelizmente não achei na internet pra vender esses kits de carbono e quando achei só o deck estava um preço absurdo. Por acaso você tem esses arquivos? Aqui no brasil eu conheço uma empresa que corta a laser as chapas de fibra de carbono e ficaria mais viável mandar fazer do que comprar lá de fora ja que as taxas de importações aqui no Brasil são altíssimas. Agradeço desde ja pela atenção.
@RCRoads
9 ай бұрын
Beautiful setup. You really went the extra mile on this build. Amazing.. Thanks for sharing 👍
@verabell138
9 ай бұрын
So how does it drive? In comparison to original plastic D5? And what about differential, which is not present?
@kelvinmrrc3289
9 ай бұрын
There is just more adjustability with the upgrade parts , a lot more refined than the plastic model & the locked diff is what is needed to drift . So it’s perfectly fine with the kit locked diff.
@madnaaz6537
10 ай бұрын
do you have a link to where you can buy this kitt?
@kelvinmrrc3289
10 ай бұрын
Just go on eBay or AliExpress, there’s plenty there 😜👍🏼
@manoloerbutanero66
10 ай бұрын
Hello ! First of all thank for this video! Its the only one I could found of the D5S clone , and with information! I bought the same kit last week but I had problems with gear ratio… I think the pitch does not match up like u said.. That being said, did you put a 48 pitch? Did you order it in aliexpress? In order to run a 10.5t? Thank you!!
@kelvinmrrc3289
10 ай бұрын
Any 48 pitch spur will fit , just use genuine 3 racing spur gears.
@SaltCityRC
10 ай бұрын
how do you install the servo?
@kelvinmrrc3289
10 ай бұрын
Low profile Servo is a tight fit , remove the top deck and pull Servo wire through first .
@k1ortia
11 ай бұрын
New drinking game, do a shot every time he says "Umm"
@kelvinmrrc3289
10 ай бұрын
😅 thanks my guy , completely agree , I’m terrible with these vids , thanks for watching
@k1ortia
10 ай бұрын
@@kelvinmrrc3289 Nah you did great brother. Only having a laugh. Keep it up..😁
@micuale5340
Жыл бұрын
How its drive ? Ive build The D5 MR V2 its all plastic but drives super nice with The Gyro set on 80% at 100 % I hâd wobble
@kelvinmrrc3289
Жыл бұрын
At first I thought gyro was ok but I did have to drop it by 10% , she’s now smooth as butter , I did look at the MR , but I like the rear weight bias of the RR.
@aleshazahra2952
Жыл бұрын
When u upload running video sir. Love to see this car in action.
@pieterolivier792
Жыл бұрын
Great info. Ive just been messing around with my hsp flying fish getting it ready to take to a club day. Using the G27 club motor and running against mostly tt02s hopefully i can get it dialed in and be competitive. Would have loved the carbon bits if it was available to buy.
@cookingchickenugget6924
Жыл бұрын
i will pass until im richer just gonna stick to a bl conversion for now
@trevorbedding148
Жыл бұрын
Whats the body shell
@the-black-sheep
Жыл бұрын
please share a link to the store you got these from. cool video man!
@kelvinmrrc3289
Жыл бұрын
Jz9193 Store a.aliexpress.com/_mqDyzPM
@NoahEditsAu
Жыл бұрын
Hey can I ask what wheels they are and where can I get them! Thanks so much! 😊I’ve subscribed awesome vid
@trevorbedding148
Жыл бұрын
Car looks amazing and is so quick! Its nice to see hsp cars running so well. I got one a week ago after my nostalgia finally got the better of me (my dad set up a club after me and brother got tamiya cars back in tbe 80's). So im back to square one with a basic model and a wheel spanner in hand! Thanks for the video, im going to need all the help i can get!
@chummlysrc654
Жыл бұрын
where did you get that rotating car stand
@CristionoVR
Жыл бұрын
I have golden build....all parts are same but colour is gold 😅
@artistry-lifeart9721
Жыл бұрын
That's super amazing !Big thumbs up
@cj698
Жыл бұрын
ᴘʀᴏᴍᴏsᴍ
@ibrahimabdulmalik3661
2 жыл бұрын
Wahh... Nice carbon part.. Are you use zd racing shock absorber or stock ??
@kelvinmrrc3289
2 жыл бұрын
Hsp make their own aluminium set
@takjr0
2 жыл бұрын
Hi, good video, how was / is your experience with this HSP chassis, didn't it bend or anything?
@kelvinmrrc3289
2 жыл бұрын
Good chassis and is fairly durable , fitment is not the best but even if you break things it’s the cheapest out there to replace , just remember this is the cheapest full aluminium build out there.
@mohdhafismdnoor
2 жыл бұрын
Hye boss..what model is this?
@kelvinmrrc3289
2 жыл бұрын
Hsp flying fish or touring car
@TW39
2 жыл бұрын
Nice what is the width on the wheels
@kelvinmrrc3289
2 жыл бұрын
Standard race wheels which is 24mm
@boolemn
2 жыл бұрын
Impressive car you built there mr Kelvin.
@jhaybz29
2 жыл бұрын
Hello, I'd like to ask a question: I have the same truck which is brushless, I recently bought the upgrades for it, did you reuse the screws from the plastic ones? or did you buy new screws? Thank you in advance~!
@islandnow04
2 жыл бұрын
best to buy new screws, thread for plastic screw slight ticker
@kelvinloquias5272
2 жыл бұрын
Sorry for the late reply , you will need new screws as the metal components specifically the ones that go underneath to the gear housing cases take finer screws.
@jhaybz29
2 жыл бұрын
@@kelvinloquias5272 Thank you for the reply, no worries. I was able to order machine threaded screws so its fine now. My only problem now is the kit is incredibly wobbly, I managed to mitigate some of the wobble by strategically placing shims/washers. Still wobbly though haha
@kelvinmrrc3289
2 жыл бұрын
@@jhaybz29 yes it’s a hit and miss with the parts you use , hsp is not the best when it comes to parts fit , but you can make them work by adding shims here and there , and if you end up using the aluminium tie rods you can minimise play or slop by using the rubber O rings that you will find mainly in the suspension , use them front and rear of the ball joint for extra security and less play .
@jhaybz29
2 жыл бұрын
@@kelvinmrrc3289 ohh the rubber o-ring is a great idea, thanks again will try it.
@jebrc
2 жыл бұрын
Just strap the lipo to the lipo hold down bar
@sumonmiah1902
2 жыл бұрын
I went with all alloy only to find crashing causes the alloy to bend where as the plastic has flexes so i went all plastic again and it increases the run time 👍🏽
@takjr0
2 жыл бұрын
Based on your experience, what parts do you think it is worth to keep as plastic and what as alloy? I was going to buy the same HSP as in this video (94111 I think), but it came to my mind that off-roads RCs can jump and crash a lot when jumping and all, and this could bend the alloy.
@sumonmiah1902
2 жыл бұрын
@@takjr0 Hi.I would say keep it all plastic.the plastic has some flex so it obsorbs the impact better.full alloy makes it too rigid and adds weight therefore shorter play time.are you going brushless or brushed?
@takjr0
2 жыл бұрын
@@sumonmiah1902 I was thinking on going brushless, this is my first RC, so in the future if I buy a better chassis (maybe a full car from a good trademark I can swap the interior parts).
@sumonmiah1902
2 жыл бұрын
@@takjr0 go brushless is the way to go.but theres some other tweaks you do to make it faster.
@takjr0
2 жыл бұрын
@@sumonmiah1902 nice, please share, I'm also going for a 120A ESC, what else do you recommend?
@spencerreif9879
2 жыл бұрын
This is so sick! I love my flying fish's. About to build my 3rd
@ncsc42bukitbesi20
2 жыл бұрын
to be sold to?😁
@mattr4078
2 жыл бұрын
I love the carbon parts, its a shame they stopped making them.
@TheRChobstar
3 жыл бұрын
Hi bro, any Manuel around for the hsp94123 that you know off? Apparently Hard to find. Thx, and good vid 🤙⭐
@kelvinmrrc3289
2 жыл бұрын
Hope this works and helps www.manualslib.com/manual/1001045/Hsp-Xeme-Pro-1995.html
@NeoIsrafil
3 жыл бұрын
For a <100 dollar kit the sakura advance is SUCH a great value. I wish dirt kits came in budget options like this because its a pretty amazing starting point. Theres 400 dollar kits that don't even include antiroll, much less bearing guided ones.
@pv2115
3 жыл бұрын
I need it
@pv2115
3 жыл бұрын
I need a link
@pv2115
3 жыл бұрын
Круто
@pv2115
3 жыл бұрын
Wow
@cressida113
3 жыл бұрын
Hi Kelvin. Just wondering if you still sell the carbon fibre kit?
@kelvinmrrc3289
2 жыл бұрын
Unfortunately we did run a pilot for the chassis however there was not too much interest , so only a handful was made, but if you get some carbon sheets 3mm and 2.5mm you can use the plastic or metal chassis and mark out the mounting holes and create your own .
@dustinplee5067
3 жыл бұрын
Can you please kindly let me know ASAP if this chassis will work with a quantum vandal 1/10 scale buggy I found it on Amazon Aluminum Chassis Plate Replacement 04001 for RC 1/10 Redcat HSP 94111 94107 Rally Truck Off Road Buggy Upgrade Parts
@MrGridStrom
3 жыл бұрын
Hi Kelvin, where did you get the sway-bar diff mounts from? (the thing with the tiny 4 screws in it)
@kelvinmrrc3289
2 жыл бұрын
Hey mate , I had to make them , quite simple really , just get any flat piece of flat 2mm black plastic , cut to size and match the holes that’s already on the diff casings , and just dig out a little channel on the plastic mount so that the sway bar can freely move , the tension on the 4 mounting screws will assist with how much friction you want to apply to the sway bar… hope this helps
@MrGridStrom
2 жыл бұрын
@@kelvinmrrc3289 Wow they look professionally made; I also made my own. I was kinda hoping I could save myself the hassle next time and buy them lol. I also made some custom parts for my HSP rc, check it out some time.
@frankensteinchopshop1413
3 жыл бұрын
Got mine 2 weeks ago I was lucky eBay sold me one with all metal parts and carbon fiber frame for 118 awesome price awesome 1/10 scale so agile and responsive better than a lot of single rod drive train
@xpertanimation
3 жыл бұрын
What type anti roll bar u use? Did you custom?
@kelvinmrrc3289
3 жыл бұрын
Hi Azuddin , yes I had to custom make them as the HSP ones were too big. Best to use a 1.2mm bar ... and connect with 3.8mm ball ends ... and try to use light weight aluminium ones . Hope this helps .
@gennarobottino6303
3 жыл бұрын
hello in the video first you see the aluminum steering rods screwed on top, then at the end of the video the steering rods are in plastic screwed underneath. which is the right way?
@kelvinmrrc3289
3 жыл бұрын
Hey Gennaro , sorry for the late reply , I went with the plastic so as to limit play, the aluminium ones were just too sloppy for my liking .
@gennarobottino6303
3 жыл бұрын
@@kelvinmrrc3289 hello friend, yes it's true I also mounted hsp 94123pro all aluminum and I must say and as you say I'm a bit slow with plastic pulls better. congratulations nice video.
@tibslikewiser863
3 жыл бұрын
Can i put this chassis on a hsp wolverine
@kelvinmrrc3289
3 жыл бұрын
Hey tibs , unfortunately not , the diff casings will not match up.
@tibslikewiser863
3 жыл бұрын
@@kelvinmrrc3289 true all good homemade modification perhaps
@jebrc
2 жыл бұрын
@@tibslikewiser863 ive done that with the same buggy as my chassis snapped in half i had to drill a few holes but it worked
Пікірлер