Don't waste your money. It's fucking junk..... don't be a dumb ass...
@dannygaines6539
16 күн бұрын
BS
@davidcrockett6906
16 күн бұрын
How much surface does a kit cover ?? Have a black 2012 Mitsubishi Gallant with clear damage on most of the upper surfaces.
@donburke4886
17 күн бұрын
Nice work... But it always makes me laugh the way Americans say "Ve - hicle" Its simply "vehicle"
@virgo4200
21 күн бұрын
wax on wax off daniel son
@suzehartman2068
21 күн бұрын
Would this work on a fiberglass motorhome
@Robrt32
28 күн бұрын
I just got mine delivered today. I’m hoping for the best. I’ve seen mixed reviews on the streaking. I’m watching every video I can find to try and learn what not to do.
@seanfairbairn8815
Ай бұрын
can you wax this product after application and curing?
@LadyToyz
Ай бұрын
Fix your headlights already!!! Do you make a product that works on fiberglass shells like the 4Runner / Bronco / Blazer?
@minmog
Ай бұрын
Is this available in the UK?
@sopasaldana
Ай бұрын
What if I sand it first? Better finish or doesn’t help? Thanks.
@brainsmith9827
Ай бұрын
👍now I need that too
@The_Dustin_B
Ай бұрын
2 years later... how does the finish hold up?
@harveys.2821
Ай бұрын
Just bought this kit That looks good!!!❤ just 1 coat ? If I apply a 2nd coat do I really wait 24hrs
@MuscleCarJr
Ай бұрын
what did I do wrong It came out flat & I ordered gloss
@luisponce1472
Ай бұрын
Don't do this in the Sun do it inside your Garage
@erickherrera8225
Ай бұрын
How long does it lasts?
@Mike-ui7ls
Ай бұрын
Prob a day
@gutshotgriz3936
2 ай бұрын
It would be nice to see some close up shots, especially on the gloss side. Have seen other reviews where streak marks were an issue. And if there are streak marks, how to get rid of them? Second coat? Buffing? or…?
@bbsal4031
2 ай бұрын
Later as you normally would wash it can you use the normal products like ceramic shine, wash and wax, spray detailer, stuff like that?
@PREDATOR07
2 ай бұрын
See how we never stop learning in life? After 17 years detailing RVs and boats i never knew about this life saver product .
@papasolecustoms
2 ай бұрын
What’s everyone’s thoughts on the gel coat?
@dillanortiz7651
2 ай бұрын
How much of the streaks are visible after drying? I’ve read reviews of how they see a lot of streaking afterwards. I bought the kit but I’m in the air about applying it to my boat.
@mattbardhi898
2 ай бұрын
Honestly if your scuffing and sanding(like in the video) might as well hit it with the buffer. Good be good for super thin gelcoats that you really can’t wet sand or heavy cut properly. But the fact that it can go on the trim is a little concerning, as real gelcoal shouldn’t go on the trim 😂
@mattbardhi898
2 ай бұрын
@@dillanortiz7651to the streak, I’m sure you can wet sand and buff it, as I said, would be interesting to see on a thin gel coat application.
@sheppardroubion
2 ай бұрын
Does this hide or cover petrified clear coat or do I have to sand it frist
@stonwall9065
2 ай бұрын
That old styling is still unrivaled. It has more character than anything on the road today
@Osterizer0128
2 ай бұрын
That truck is bad to the bone Brotha Amazing job
@logananderon9693
2 ай бұрын
I used to use Mop-n-Glow on my boots in the military. Same thing.
@guymiller9212
2 ай бұрын
Well guys, you guys must be doing something different than all other videos obviously you've done multiple vehicles, but your applicator that you give makes it leave a streaky ugly finish. Nothing like you're doing kind of seems like is that poppies that you guys do any other applicator pad or roller cause the Tery cloth one seems a little streaky and ugly
@SimpsonsClassics
3 ай бұрын
This stuff looks great. We definitely have some cars that could benefit from this product.
@thebeardedgingerontheinter3256
3 ай бұрын
I don't see this lasting very long how thin it is??
@user-cn2en9gu8k
3 ай бұрын
how much product will i need to do a 1978 rancharo and how many coats if i spray it on? thanks
@jermaineenglish5732
3 ай бұрын
Can you use a different reducer with the hot rod block paint
@gianni7397
3 ай бұрын
💖 *Promo sm*
@deannapoli441
3 ай бұрын
Will this work if there is no clear left? All thats left is base...
@SadComicLaughs
3 ай бұрын
considering this is a wipe on clear coat its probably better if you don't have a current clear coat cause this will make one and then it will be all uniform as long as the base coat is fully intact and not faded and spoted but i'd think you get some touch up spread it around and than put this stuff on and your good as new or at least shinier for 2 or more years
@Mike-01234
3 ай бұрын
Probably better then leaving it base won't last long then you start getting rust I would give it a shot see how it comes out. Worst case you DA sand it again and shoot entire car base and clear. I have repainted several cars not as difficult as many think it is just paint. People are intimidated by urethane more then needs to be. I DA sand entire car then use same method in the video Stochbright pad and W&G remover. I use one of those $100 Harbor Freight carports add plastic to the sides use two cheap box fans from Walmart throw some AC filters on the backsides of them blows clean air in. Not perfect good enough for a budget paintjob.
@luisponce1472
Ай бұрын
I Recommend wet Sanding it just to get the Lumpy stuff off
@SuperJustin1001
3 ай бұрын
Will vinyl wrap stick to this? Thank you
@techno_vato
4 ай бұрын
How long will this stuff last in Arizona heat? I have black paint myself.
@rstscott
4 ай бұрын
If you are using gloss, you have to wipe it on in long wet single passes if you want it to look good. It starts to harden pretty much instantly. Any spot you touch twice will dry streaky. It took me 3 tries to get the hood of my truck to a point that I felt it was acceptable.
@rstscott
4 ай бұрын
I just put the gloss on my sanded down old single stage blue paint on my 56 f100. All I will say is don’t expect anything close to a spray on clear coat finish. This stuff is meant for old burnt out patina cars/trucks. If you wipe it on a car that still has full paint coverage it is very streaky and uneven unless you spray it on. Also, it dries VERY fast. If you lay it on thick it runs and if you lay it on thin you won’t get coverage. In addition, the applicator they supplied was leaving tons of lint behind. Pretty frustrating experience overall. My final impression is that this stuff should only be applied to vehicles with substantial patina/oxidation. Unless you are spraying it, you will not be happy with the end result on a car that has full paint coverage underneath.
@MrDaoby
4 ай бұрын
Doing this rn and you are damn right about the lint from the tools provided! Had me frustrated
@AsherMelle
2 ай бұрын
currently watching this while I’m in the middle of doing my 2nd coat and I agree with the comments above lol
@akiofuj9196
5 ай бұрын
How long does this clear coat last and what does the kit cost
@dodgeram3773
5 ай бұрын
I have a 1993 dodge ram D350 my adopted dad handed to me he bought it off the show room floor of dodge and cambells in centralia, Washington and he kept it mostly garaged but since I’ve had it I haven’t exactly had a garage or anything to cover it due to apartment restrictions and part of the hood and some of the body the original clear coat is coming off so I was hoping there was a easier fix then a body shop for those few spots and here we are definitely will be giving it a go!!! Thank you for showing us this product!!
@TangoCharlieAlpha
4 ай бұрын
Not to be rude, but why did you preface you comment with "my adopted Dad"? Does that mean he's inferior to a biological Dad? If he adopted you, then why wouldn't you just refer to him as "Dad"? Not exactly sure what the relevance is here. Again, my comment isn't meant to be disparaging or impolite. But I'm just genuinely curious. No one here would know your personal situation, or be thinking, "I wonder if he got his truck from his biological, step, or adopted Dad?" As a "Step-Dad", I just refer to my wife's children as "my kids". But I digress. 😊
@alexcasper743
2 ай бұрын
Just wondering if you’ve gotten around to trying it yet? Have a 2nd gen dodge with the same situation I’ve been wanting to fix
@Joe-kw2el
5 ай бұрын
can you use this on a car that is half paint DULL paint and half patina?
@babythuglife
5 ай бұрын
Can the gloss wipe on clear be polished? Also does the wiping process leave any kind of streaking/ line effect? It doesn’t look like on video but I’d like to know up close. Thanks
@TheRossillini
5 ай бұрын
Change the wheels please
@jonbain838
5 ай бұрын
So, is the truck on the left treated with the matte coating ?
@ZombieNativityScene
6 ай бұрын
What’s it look like two months later? Or even two weeks
@poppyspatina
6 ай бұрын
This is an actual urethane clearcoat like you would see on any late model vehicle only ours has the option to be wiped on or sprayed on. One coat last year’s. Reach out anytime.
@402car_kid4
6 ай бұрын
Make sure when you use a wax and grease remover or an IPA before any coating you don’t let it dry before taking the dry cloth and removing because if you let it dry after the first wipe, all that stuff that was just picked up dries on the panel again. This is a very important step.
@timsolomon8352
6 ай бұрын
What?
@motavice3499
5 ай бұрын
Thanks for the tip! Small details in prep make a huge difference.
@carsonp.7009
2 ай бұрын
not AN IPA lol, some IPA, rubbing alcohol shit like that, dont use 805 Double Mind Haze
@402car_kid4
2 ай бұрын
@@timsolomon8352 what are you having trouble understanding?
@402car_kid4
2 ай бұрын
@@carsonp.7009 isopropyl alcohol (IPA)
@polyx220
6 ай бұрын
Oh hell yeah!! Looks great!
@user-vb7vi1zd7s
6 ай бұрын
There's a lot of streaks after application on our Chevy C10 - how do you recommend fixing streaks as well as preventing them? Thanks!
@brokengaming4906
6 ай бұрын
Hi! does it work for repairing sun faded paint? My roof is pretty bad but luckly doesnt have any clear chipping off. Just evenly faded across. Thanks!
@TreadTalk247
6 ай бұрын
Now that I know what finish I’d use, now I just need to find a 47-53 AD!!!
@williamlopez4934
7 ай бұрын
Can u polish or wax this clear coat . Or wet sand?
@manson12ify
5 ай бұрын
I want to know as well
@Mike-ui7ls
Ай бұрын
No reply from a 2k account. Guess no polish allowed
@kevinmckenna2877
7 ай бұрын
I am wondering if you have a coat that does not come out glossy?
Пікірлер