How you blocked clutch so you can tight clutch hub bolt? I can tighten it cuz It’s spinning and i don’t want to break the thread
@pj0trullo
5 ай бұрын
How you remove the czutych hub bolt so easy Mine is spinning
@victorsdirtbikes9790
5 ай бұрын
@01.07 :) Or you can use a impact wrench.
@jasonjavelin
7 ай бұрын
Got one of these as a basket case as part of a trade deal. Sadly its already missing almost all of the power valve components which makes it a little tought to want to restore since they so expenive. Love how comprehensive your video is though it will help me ton in disassembly!
@victorsdirtbikes9790
7 ай бұрын
Nice, it can be hard to find good parts for theese ones, but if you do it will be worth it, really cool bikes. Glad you enjoyed the video!
@felipesasiain9638
8 ай бұрын
Do you know if I can use a cylinder of a yz 125 for my Kx 125 2002? thanks
@victorsdirtbikes9790
8 ай бұрын
I doubt it, sorry. Suzuki and Kawasaki was basically the same bike for some models. But i've never heard of someone using parts from Yamaha.
@Me23-e4u
10 ай бұрын
I got everything installed. I cannot line the clutch up to put the cover back on.
@victorsdirtbikes9790
10 ай бұрын
Make sure the lever on the case is in the correct position, and it should be fine. Good luck!
@Me23-e4u
Жыл бұрын
My son has a 93 kx 80 I will pull the clutch in and put it into gear the bike will jump and turn off while the clutch is pulled in
@victorsdirtbikes9790
Жыл бұрын
Souds like you need to adjust your clutch cable. If that doesn't work i would inspect the clutchbasket, a "groovy" one might couse that problem. Good luck! :)
@Me23-e4u
11 ай бұрын
I couldn’t remove the nut from the impeller how do you lock it up? It kept turning as I was trying to take it off.
@flarehyper156
Жыл бұрын
Thanks for the help
@imackmusic7924
2 жыл бұрын
I'm Pretty Confident I can Do this
@victorsdirtbikes9790
2 жыл бұрын
Sure thing! Time for a rebuild?
@imackmusic7924
2 жыл бұрын
@@victorsdirtbikes9790 yep
@mitch23241
2 жыл бұрын
I have Kx 80 big wheel my clutch have no spring resistance and hard to get bike moving without stalling
@caneli0925
2 жыл бұрын
I thought it was a bee in my damn truck 🤣
@victorsdirtbikes9790
2 жыл бұрын
Haha! :D
@natefrazier5018
2 жыл бұрын
How tight do I do the springs bc when I texted to put them in it's no clutch or all clutch and it's a 1997 kx 80
@victorrichards2191
7 ай бұрын
this happend to me too if you find out a fix let me know please i have the same year
@hughmoore415
2 жыл бұрын
excellent video am iright in thinking to remove the impeller bolt is anti clockwise,mine is a1984 kx 80 thank you
@kirbylee57
2 жыл бұрын
I thought he was going to show how you to disassemble it. What was the point of this video?
@victorsdirtbikes9790
2 жыл бұрын
Well the engine is fairly disassembled is it not? It's not a tutorial. But i guess the purpose of the video is to show how to disassemble the engine and split the cases. Anything specific you are looking for?
@Drigo103
2 жыл бұрын
Great Video.. Keep em coming
@victorsdirtbikes9790
2 жыл бұрын
Thanks 👍
@travismania2501
3 жыл бұрын
What's the song its wonderful
@victorsdirtbikes9790
3 жыл бұрын
I guess your looking for "you and me" by Elder Kedem. Thank's for watching 👊
@TrucksAndTunes
3 жыл бұрын
Hello, my 1990 KX 80 has the weridest clutch feel and always stalls when letting go. Plates are in check and look good as well as the basket. I was wondering on the clutch pusher if there is a bearing
@natefrazier5018
2 жыл бұрын
See if the screw for the plate the springs are on are to tight and I need help do I need to have it in a certain gear to do them
@mikethompson3313
3 жыл бұрын
What year is your bike,?
@victorsdirtbikes9790
3 жыл бұрын
Think it was a 91 or 92.
@mikethompson3313
3 жыл бұрын
How many pressure plates are in the clutch 7 ?
@tonystepina5715
3 жыл бұрын
Have a kx85 2003 big wheel that is having clutch issues. It is really hard to get it in neutral and if I do it pops out. If I start in neutral when I try to put in gear it dies
@victorsdirtbikes9790
3 жыл бұрын
Hi Tony, If the it is hard to shift gears, and the bike dies when you put it in gear your clutch just might be dragging. Adjust the clutch lever so it has 2-3 mm of free play (@6:29). If the clutch drags you might hit "false neutral" more often wich is when the gear does not fully disengage. With the engine turned off, put it in gear and then move the bike back and forward (not very hard), then shift it again. / Victor
@user-vl2uh8gx4k
3 жыл бұрын
แรงม้าเทาไรคับอยากทราบ
@user-fb6fv3ml9z
5 ай бұрын
21
@user-lf9yh4pl3n
3 жыл бұрын
Please tell me the size of the clutch discs , I have a motorcycle in 1992, the original discs are no longer there. Or tell me analogs, thank you
@victorsdirtbikes9790
3 жыл бұрын
To be sure you get the correct clutch for your bike is to go to a shop or website and buy the clutch as a package. Make sure to replace the steel plates and springs while your at it.
@niei6218
3 жыл бұрын
@@victorsdirtbikes9790 hi do you know where to get the whole clutch kit and gasket for a 1996 model? Thanks in advance
@hommie241
3 жыл бұрын
How did u remove the primary gear bolt I skipped it at 11:30??
@victorsdirtbikes9790
3 жыл бұрын
Look at 6.03. You remove the clutch and then you either hold the hub with a tool, or you can hold the crank with a flywheelholder.
@xzayvior6520
3 жыл бұрын
Thanks this helped a lot u need more followers I liked and subed
@victorsdirtbikes9790
3 жыл бұрын
Awesome! Glad i could help :)
@herfeo202
3 жыл бұрын
Did you buy a kit to rebuild the bottom end? If so, where did you get it?
@victorsdirtbikes9790
3 жыл бұрын
I had some real trouble to find parts to this bike, so I sold it in parts unfortunately.
@victorsdirtbikes9790
3 жыл бұрын
But I think ProX got a crank for like 250 bucks. Hope you find your parts!
@herfeo202
3 жыл бұрын
Ok thanks for the help!
@herfeo202
3 жыл бұрын
Hey I'm back with another question lol, what did you use to get it so clean? I'm just using some gas to free up the chunks.
@victorsdirtbikes9790
3 жыл бұрын
@@herfeo202 Hello there! :) I started by scraping the most dirt off with the backside off a dish-brush. Then i used WD-40 (like half a can) to get it fairly clean. Spray it, then use a soft brush to really get in in there. Then WIPE the dirt off the engine. Is it a 1993 you are working on? How is it going? Did you find a rebuild-kit for it?
@invidpato
4 жыл бұрын
great job man!! you have the video of when you put it together again?
@victorsdirtbikes9790
4 жыл бұрын
Unfortunately i sold the bike after the disassemble and cleaning of all the parts, which i almost regret since i really miss a 125 in the garage ^^ Thank's for watching! :)
@Bataha
4 жыл бұрын
awesome dude
@victorsdirtbikes9790
4 жыл бұрын
Thank's! Glad you liked it.
@alexsgarage01
5 жыл бұрын
Great video man. Maybe do an expectations vs reality on repairing/maintaining your bike lol. It looks easy in the videos but then things quickly go wrong...
@victorsdirtbikes9790
5 жыл бұрын
That's a really good idea! Glad you enjoyed the video. Thank's for watching :)
Пікірлер