Hi! Please tell me, if I put an autofocus aps-c lens on the S5ii, for example, sigma 30mm f1.4, can it be turned on in Full mode? Or will the camera not allow you to do this with an autofocus lens? It is clear that there will be a vignette. But after that, I want to select the High stabilization mode and the vignette should go away, and the total crop will be 1.44, not 1.44 crop on 1.5 crop.
@gabrielsagerSS
3 күн бұрын
Alrighty. So, if you put an aps-c lens on the camera, you will be able to turn it on. However, there will be a vignette. So, in short, you can put any aps-c that has the correct mount on there, and it will turn on, and function normally. You won't have to worry about the camera rejecting your lens. I'm not entirely clear on how you are going to crop it, but if you know what you are doing, then I trust you! If you have more questions just ask!
@Damian-i2e
3 күн бұрын
@@gabrielsagerSSYou probably didn't understand the question unfortunately. I can put a lens like sigma 30 1.4. it will be in aps-c mode. I'm adding high electronic stabilization to it and there will be an additional 1.5 crop on aps-c. This is not encouraging. And I would like to know if it is possible to put an aps-c lens in full frame mode, then set the electronic stabilization to high and get a total crop of 1.4, not 1.5 to 1.4
@gabrielsagerSS
3 күн бұрын
@@Damian-i2e I'm sorry I didn't understand. Let me do some testing myself, and I will get back to you.
@Damian-i2e
2 күн бұрын
@@gabrielsagerSS Okay, I'll be waiting, thanks!
@ancledoidoi1102
2 ай бұрын
Amazing, thanks heaps for the video :)
@gabrielsagerSS
2 ай бұрын
No problem! Glad you liked it!
@1000TuTiengAnhThongDung
3 ай бұрын
hi sir. motor 050 50T vs 66T which is stronger?
@GabrielSagerShot
3 ай бұрын
Hello! The 50t motor will give you more torque than the 66t, however, the 66t will run faster, and is much much stronger than the original 88t motor. I personally like the 66t and would feel no need to switch to a 50t, but that is up to you!
@1000TuTiengAnhThongDung
3 ай бұрын
@@GabrielSagerShot Thank you for your advice
@GabrielSagerShot
3 ай бұрын
You are welcome!@@1000TuTiengAnhThongDung
@markgellineau4070
4 ай бұрын
Does it also charge via the USBC cable? Or are battery swaps required?
@gabrielsagerSS
4 ай бұрын
Yes, the Canon R6 Mark II will charge via usb-c. Make sure to use Canon chargers, or reputable brand chargers though!
@markgellineau4070
3 ай бұрын
@@gabrielsagerSS Thanks!
@tonyscalifornia
8 ай бұрын
Awesome man. Thank you a lot. It’s hella big lens for small setup hahaa
@gabrielsagerSS
8 ай бұрын
Glad you liked it! 😀
@danielimbriaco3917
9 ай бұрын
i put the 66t and it fried right away dident even move it and it started smoking
@gabrielsagerSS
9 ай бұрын
If you did not press the throttle, and it started smoking, (and you are sure it is the motor) then it could have been a battery problem. Something might not have been connected properly. Thanks for the feedback!
@AbigailPierce-o8h
10 ай бұрын
Great job! Keep up the good work!
@gabrielsagerSS
10 ай бұрын
Thanks!
@Official_ADub
10 ай бұрын
Remeber the rest of the quote. Jack of all trades, master of none, but still better than a master of one.
@gabrielsagerSS
10 ай бұрын
I have never actually heard the rest of the quote!
@danielmartinphotography
10 ай бұрын
I absolutely love my Sigma 24-105, I replaced my broke Canon 24-105 with the Sigma. And I like it a lot better! Thanks for the video! A lot of people dislike it because it only goes to f4.0, but I have the Canon24-70 f2.8, but you don't always have to just blow away the background with blur. Sometimes it;s good to show where you are! Thanks! I just subbed to your channel, keep up the good work!
@gabrielsagerSS
10 ай бұрын
Thanks so much! Really appreciate your story!
@yarimarrios7863
10 ай бұрын
I just made one to use it today.🎉🎉
@gabrielsagerSS
10 ай бұрын
That's awesome! Glad you found this video helpful!
@josiahlaskowski
11 ай бұрын
Where do you get your music? (Also amazing photos!)
@gabrielsagerSS
11 ай бұрын
I get all of my music from Uppbeat! (that is the correct spelling by the way)
@kevincasey6876
Жыл бұрын
That was fast
@rcflashcars
Жыл бұрын
cool vid! big like!! 👍👍👍
@gabrielsagerSS
Жыл бұрын
Thanks for the like!
@danielemulazzi1615
Жыл бұрын
Wow....come posso avere anche io questo chassis ???...bellissimo ...bel video... ciao dall'Italia
@gabrielsagerSS
Жыл бұрын
If you have a 3D printer, you can 3D print the body. The file is on Thingiverse, I'll put the link in the description below. Thanks for the feedback!
@gabrielsagerSS
Жыл бұрын
All of the filming, I did myself, and I edited it on Davinci Resolve 18 if that's what your asking.
@gabrielsagerSS
Жыл бұрын
I'm not entirely sure what you mean by "what site."
@wilsonoffroad1803
Жыл бұрын
What site did you us for that
@gabrielsagerSS
Жыл бұрын
Thanks so much, guys! That really helps.
@SpierdalajOdMojegoStronu
Жыл бұрын
I can tell you put alot of work to this
@FlamingBRICKStudios
Жыл бұрын
So much effort
@stevemiller3941
Жыл бұрын
I'm new, so this helps a lot! Thanks dude!
@gabrielsagerSS
Жыл бұрын
Thanks, for the feedback!
@makelegosgreatagain3755
Жыл бұрын
Hey nice video shouting you out on community post right now!
@gabrielsagerSS
Жыл бұрын
Thanks man!
@xavior2302
Жыл бұрын
Solid!!
@cerisekappes580
Жыл бұрын
The kitty supervisor approved 😊
@gabrielsagerSS
Жыл бұрын
Thanks!😁
@cerisekappes580
Жыл бұрын
@@gabrielsagerSS you are welcome😀
@gailrodecker9171
Жыл бұрын
Awesome
@makelegosgreatagain3755
Жыл бұрын
Nice going!!
@gabrielsagerSS
Жыл бұрын
Thanks!
@xavior2302
Жыл бұрын
Solid!!
@sagerfamily4979
Жыл бұрын
Cool!
@xavior2302
Жыл бұрын
Sweeeet!!
@xavior2302
2 жыл бұрын
Nice!!
@gabrielsagerSS
Жыл бұрын
Thanks!
@xavior2302
2 жыл бұрын
Solid dude!
@gliderreserve9544
2 жыл бұрын
This is helpful. I use a brush. I also use whatever stryofoam comes from packaging. This is very helpful for those who are learning and having fun.
Пікірлер